منافسة عامة قيد التنفيذ

تأمين وتوريد وتركيب وتشغيل الأجهزة الرئيسية للمختبرات المرجعية لعام 2023

الهيئة العامة للغذاء والدواء

رقم المنافسة

230939001688

المعرّف

#665460

رقم المنافسة
230939001688
رقم المنافسة الداخلي
2301323
الجهة الحكومية
الهيئة العامة للغذاء والدواء
الفرع / الإدارة
إدارة العقود والمشتريات
نوع المنافسة
منافسة عامة
حالة المنافسة
تم اعتماد الترسية
طريقة تقديم العروض
ملفين منفصلين ( فني ومالي)
رسوم الاشتراك
500 ر.س
سعر كراسة الاشتراط
500 ر.س
تكلفة الدعوة
200 ر.س
تكلفة الشراء
500 ر.س
الضمان الإبتدائي
ضمان إبتدائى
الضمان النهائي
5.00%
مدة العقد
150 يوم
التأمين مطلوب
لا
مدة الوقفة (أيام)
5
داخل المملكة
—

عنوان الضمان الإبتدائى

الهيئة العامة للغذاء والدواء بمدينة الرياض المبنى الرئيسي –حي حطين – إدارة الاتصالات الإدارية

الغرض من المنافسة

تأمين وتوريد وتركيب وتشغيل الأجهزة الرئيسية للمختبرات المرجعية (مختبر الاحياء الدقيقة، مختبر الدواء، مختبر الكيمياء) بالهيئة العامة للغذاء والدواء. لعام 2023

التاريخ ميلادي هجري
تاريخ النشر 2023/09/06 07:29 —
آخر موعد للاستفسارات 2023/10/10 1445-03-25
آخر موعد تقديم العروض 2023/10/11 11:00 1445-03-26
موعد فتح العروض 2023/10/11 11:10 1445-03-26
موعد فحص العروض — —
التاريخ المتوقع للترسية 2023/10/08 1445-03-23
تاريخ بدء الأعمال 2023/10/12 1445-03-27
تاريخ خطاب تأكيد المشاركة — —
بداية إرسال الأسئلة 2023/10/09 1445-03-24
أقصى مدة للإجابة 3 يوم
مكان فتح العروض الرياض المبنى الرئيسي للهييئة العامة للغذاء والدواء حي حطين
مدة الوقفة 5 يوم

موقع التنفيذ

منطقة التنفيذ
منطقة الرياض
مدن التنفيذ
الرياض
موقع التنفيذ
داخل المملكة

مجال التصنيف

مجال التصنيف
غير مطلوب
يشمل مواد توريد
لا

الأنشطة

  • • تجارة الأدوات والآلات والأجهزة
  • • تجارة قطع الغيار الجديدة

جدول 1 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
MALDI TOF امتصاص الليزر بمساعدة المصفوفة التأين زمن الرحلة مطياف الكتلة 1 1 Speed of analysis: 95 isolates + 1 QC sample ~ 5 min to identification Identification of 600 samples/hr Identification results popping up instantly after spectra acquisition, one by one, without delay. library covering : gram positive and negative bacteria, yeasts, Filamentous fungi, Mycobacteria. And the Resistance detection bacteria. Also, Identification directly from positive blood cultures. Laser: Proprietary lifetime smartbeam laser. 200 Hz repetition rate At least 500 million laser shots are guaranteed Polarity: Positive and negative ion mode Mass range: 0-500.000 Da; with MALDI Biotyper applications focused to: 0-1.000 Da (resistance detection) 2.000-20.000 Da (microorganism identification) Vacuum system: Oil-free membrane pre-vacuum pump and high capacity turbomolecular pump High pumping capacity, which in combination with a clever source design results in very fast target exchange. Minimal downtime after maintenance. Dimensions & Operating Parameters: L x W x H: 500 x 710 x 1070 mm / 19.7 x 28.0 x 42.2” Net weight: 75 kg / 165.4 lb Noise: < 60 dB Temp Range: 16 - 30°C / 61 - 86°F Operating Humidity: 20 - 75%, non-condensing. More features: LED strip to remotely observe system status. Perpetual Ion Source™ with IR-laser self-cleaning functionality Whispermode™ <60 dB under normal operating conditions Patented PAN™ technology for high mass resolution over a wide mass range Voltage: 220 V MBT FAST Shuttle Standardized and accelerated drying of MALDI Biotyper matrix and other liquid reagents Software: MBT Compass HT software. MBT Compass Library. Security Related Library for identification of highly. software tools to create your own libraries. pathogenic microorganisms MBT HT Mycobacteria Module. MBT HT Subtyping Module. MBT HT LipidART Module. MBT HT STAR®-BL Module. HCCA Matrix: 10 box Bacterial Test Standard (BTS):5 box MBT Biotarget 96: 4 target جهاز 1 0

1 بند

جدول 2 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
IR Biotyper جهاز مطيافية الأشعة تحت الحمراء بتحويل فورييه 2 1 The IR Biotyper is a spectroscopic system for analysis of microorganism samples. The system is composed of a high performance FT-IR spectrometer (Fourier Transform Infrared), a high throughput screening extension intended for analyzing silicon microtiter sample plates (96 spots), and software for system control and automatic measurement of spectra. Management of isolate metadata, creation of runs and data exploration are performed with the IR Biotyper software which features, for example: • customizable metadata (biological: MLST, PFGE, virulence factors, resistances, etc.; and circumstantial: location, isolation date, matrix, etc.) • easy measurement run creation via templates • easy project creation to evaluate isolate relationships • data exploration with hierarchical cluster analysis (HCA) and result display as dendrogram or distance matrix which can be exported in PNG data format • two metrics (Euclidean & correlation) and four linkage types (single, average, complete, Ward’s) available • results from principal component analysis (PCA) and linear discriminant analysis (LDA), for enhanced discriminatory power, can be displayed as a scatter plot Silicon 96 spot microtiter plates Set of 5 reusable plates each with 96 positions designed for use with the IR Biotyper. Silicon 96 spot microtiter plates:4 plates. IR Biotyper Kit: bacterial IR Test Standards (IRTS 1 and IRTS 2) : 15 box جهاز 1 0

1 بند

جدول 3 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Ultra Low Temperature Freezers Storage جهاز التخزين للعينات الحيوية 3 1 Type Ultra-Low Freezer, Upright • Capacity (English) 24.1 cu. ft. • Capacity (Metric) 682 L • Temperature Range -50°C to -86°C • Door Style 1 Outer, 4 Inner • No. of Doors 1 • Inner Doors 4 • Insulation Vacuum Insulation Panels (VIP) + Water-Blown Polyurethane Foam (SNAP-compliant) • Interior Stainless Steel • Shelves 3 • Capacity (Metric) Shelf 93 kg • Rack Capacity 10 • Holds 2 in. Boxes (500) • Style Upright • Defrost Manual • Dimensions (DxWxH) Exterior 38.5 x 34.0 x 78 in. (97.7 x 86.4 x 198.1 cm) • Dimensions (D x W x H) Interior 28.3 x 28.8 x 51.2 in. (71.9 x 73.0 x 130.1 cm) • Monitoring Options Alarm, Recorder • Setpoint Security Yes • Connectivity External Monitoring/Cloud Compatible; 4-20mA, RS485, Dry Contacts • Electrical Requirements 208 - 230 V 60 Hz • Vial Capacity 50,000 x 2mL • Compressor H-Drive Compressor • Refrigerant R290 (1st stage), R170 + R290 mix (2nd stage Steel Racks for Freezers Description Dimensions H x W x D cm : Sliding Drawer Rack 30.2 x 14 x 68.3 for all the Shelf, and to full all the Shelf of the Sliding Drawer Rack. جهاز 1 0

1 بند

جدول 4 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Autoclave 95L جهاز تعقيم 4 2 Autoclave Top loading AMA250, 95 liter: 316 stainless steel electropolished chamber A 5.7” colour touchscreen with integrated USB data port A delayed start and a media holdwarm feature for greater control over when you want to sterilize Safety: over-temperature protection, an external pressure gauge, a cooling lock, a safety valve test program and an emergency stop button A validation port, drain valve and an electropolished stainless steel chamber Castor mounted for easy movement Timed/Pulsed Freesteaming Castor mounted for easily moving the unit FDA 21 CFR part 11 software option available Cooling Lock External pressure guage Fast action door closure mechanism Five password levels to stop lower level users making changes Steam source: Heating Element Volume: 95 L Chamber diam. x depth (mm): 456 x 584 Temperature range: 100-138°C Pressure range: 0.2-2.4 bar Load Sensed Process Timing Controls the sterilization cycle timer via a flexible armoured probe in the canter of the load. The probe is also active during the cooling phase of the cycle. Ideal for fluid loads Fan Cooling A powerful fan-assisted cooling system which reduces cool-down time. The operation of the Assisted Air Cooling system is controlled via the Astell touch-screencontroller Stainless Steel Wire Basket ( Dia:400mm x H:220mm) جهاز 1 0

1 بند

جدول 5 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
18L Stainless Steel Autoclave جهاز تعقيم 5 2 Description Work TIME: 121℃ 30Min /134℃ 10Min. SAFETY: Heating-over protection; safety valve. TEMP CONTROL DESIGN: chip control. POWER: 1100VAC. TEMP/PRESSURE: 121℃/0.12Mpa; 134℃/0.22Mpa. CHAMBER SIZE : stainless steel #304 ;18Liter ; (Ø)23×(D)36 CM. جهاز 1 0

1 بند

جدول 6 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Sensititre جهاز تحليل حساسية المضادات الحيوية 6 1 The instrument is a benchtop automated incubation and reading system for antimicrobial susceptibility testing and identification of bacterial pathogens. Achieve the comprehensive, accurate MIC values needed for AMR. Product Type: Microbiology Media. Test Type: Minimum Inhibitory Concentration (MIC). Width: 750 mm Height: 1125 mm Depth: 735 mm Weight: System, full (11 racks - 10 internal racks, 1 utility rack, 100 plates,100μL water per plate): 103KG (226.6lb) Unit Size: Each 1. Modular, customizable testing. 2. Manual, semi-automated and fully-automated to fit the needs of any lab 3. Full range of standard and custom MIC plates. 4. Eliminate offline testing while meeting CLSI and EUCAST breakpoint requirements, and FDA-established criteria. 5. True MIC results with microbroth dilution. 6. Maximize confidence, reproducibility and accuracy. 7. Large and up-to-date selections of FDA-cleared antimicrobials 8. Tailor formats to your formulary requirements. 9. Reference methodology 10. Consolidate all susceptibility testing onto a single platform. 11. SWIN software package. 12. Expert system and epidemiology system for fast, customizable reporting. جهاز 1 0

1 بند

جدول 7 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Laboratory water bath حمام مائي 7 1 Capable of handling and operating All-purpose spring tray, pre-assembly including set of springs for Erlenmeyer flasks , volumetric flasks and test tubes racks. working temperature: + 20 up to 99.9 C Temperature stability Not more than °C ±0.2 Heating capacity kW 2 Shaking frequency not more than 200 rpm Shaking stroke not more than 15 mm Filling volume not less than 15 – 20 L Bath depth not less than 40 x 20 / 15 cm W × L / D Dimensions not less than 60 x 30 x 20 cm W × L × H Voltage 220v 50hz with UK plug type جهاز 1 0

1 بند

جدول 8 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Solid Phase Extraction SPE جهاز استخلاص الطور الصلب 8 1 Highly reproducible with no cross-over , High consistency, no cross over, Simple operation, and easy collection Solid Phase Extraction (SPE). Designed for up to 12 columns and can accommodate collection tubes of 10, 12 and 15mm. Ambient temperature: 4°C to 45°C The relative humidity: More than 70% Type and number of processing samples include:10mm tube X 12 , 12mm tube X 12 and 15mm tube X 12 Vacuum degree: Not less than 0.08Mpa Internal dimension of tank: Not more than 250x60x150mm Dimension (W x D x H mm): Not more than 300x175x250mm Net Weight(kg): not more than 2.8kgs Voltage 220v 50hz with UK plug type Including SPE cartridge types: 1. One pack of C 18 phase sorbent weight 500 mg, volume 3 ml. 2. One pack of SILICA phase sorbent weight 500 mg, volume 3 ml. 3. One pack of Cyano phase sorbent weight 500 mg, volume 3 ml. 4. One pack of FLORISIL phase sorbent weight 500 mg, volume 3 ml. 5. One pack of NH2 sorbent weight 500 mg, volume 3 ml. جهاز 1 0

1 بند

جدول 9 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Laboratory ultrasonic bath جهاز التفتيت بالموجات فوق الصوتية 9 1 Ultrasonic bath fast, effective, efficient, easy and safe cleaning and processing of diverse instruments, components and solutions. Capable with Auto Degassing facility. Digital Temperature Controller LED Display settable & On/Off Key. Working capacity not less than 15 Liters with maximum capacity not less than 14 liters. Ultrasonic Power not less than 100 w Maximum heating capacity ambient +5 to 70 LED timer display from 0.00 to 99.99 minutes. Operating frequency range from 30 – 45 KHz. Voltage 220v 50hz with UK plug type جهاز 1 0

1 بند

جدول 10 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Multi tube Vortex جهاز مزج آلي 10 2 Digital hands free display shaker accommodate not less than 25 vessels with various diameters. Attachment for all vessels with diameters from 10 to 35mm. It should fits almost any tube rack from 5 ml up to 100 ml tube. It should handle a glass and polypropylene tubes. Variable speeds range up to 2,500 rpm. Operating Temperature : from 4 to 40°C Timer allows for unattended operation and can be set from 1 to 999 minutes. Voltage 220v 50hz with UK plug type جهاز 1 0

1 بند

جدول 11 المواد - توريد عام

البند الفئة الكمية وصف البند المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
حزمة أجهزة لفصل المركبات الكيميائية وجمعها في عينة اختبار بواسطة الفصل الكروماتغرافي متصل أجهزة للكشف 11 1 Preparative LC/MS System with automated combined sample injection and fraction collection حزمة أجهزة لفصل المركبات الكيميائية وجمعها في عينة اختبار بواسطة الفصل الكروماتغرافي متصل أجهزة للكشف • Fraction Collection: - collection of up to 200 fractions or better • Pump: - Flow Range: 1 – 50 mL/min or better. - Pump Type: Binary - Max pressure up to 200 bar or better - Number of Solvents: 2 or better • Autosampler : - Injection Range: 0.1 – up to 5000 µL. - Sample cooler : 4 to 45°C - Injection linearity : > 0.9999 • Column Handling: - Column Capacity: up to 2 Columns or better. - Column Oven, Heating and cooling method • Detector: - Single Mass Or Better - Mass selective detector; up to 2000 m/z high mass range;30 ms polarity switching - Interface: ESI&APCI - Analysis mode: Q1 Scan/SIM,Q3 Scan/SIMMRM - Auto tune and fully automated optimization. - Sensitivity: - ESI positive: 1 pg reserpine, S/N > 300,000:1 (RMS) or better - ESI negative:1 pg chloramphenicol, S/N > 300,000:1 (RMS) Or better • Vacuum system - Rotary pump: 1 unit or Better Provided with suitable noise silencer Suitable to manufacturing Requirements and specifications • Gas Supplies - Instrument supplied with all gas requirements necessary for optimum operation, according to manufacturer specifications. - Generators and filters should be provided for instrument gas needs and completely silent and noise free, Provide silencers if required. - Regulators ,spare parts and tunings should be provided Software: -Full version with Unlimited license. -Windows 10i at least or latest Edition -Original unlimited Microsoft Office -Suitable Pc Core I7 last generation at least -Ram 8 GB at least -Hard Disk 500 GB SSD at least -Printer , Network with Wi-Fi max resolution 600*1200 print speed Up to 20 ppm , Extra Ink Cartdge. -WiFi Stick. -Screen Full HD 25 Inch At least Installation and Maintenance: -Installation should be done by certified engineer from the original manufacturer (Certificates should be provided). -All (IQ، OQ & PQ) documents should be provided -All manuals and user guide should be provided in hard and soft copy. -A scheduled preventive maintenance and periodic check during the warranty should be provided according to the terms and conditions in this tender. -On-call maintenance and support during warranty Training: -Technical Hardware, software training by certified engineer from the manufacturer (certificates should be provided for the trainees and a copy of the trainer certificate). -Application training by application specialist from the the original manufacturer, 2 training Sessions, 5 days per session and follow up on each Instrument (A plan should be provided). -Advanced application training for two users on manufacturer site after onsite training completion. -Active application support during warranty Others: -PM KITS -Kit of consumable spare parts are required. -At least one box of each vial (amber and glass). -Supply at least 2 suitable fraction column -All gases and regulators should be provided. Libraries, methods, MRM data bases, Data Processing software , software, Latest version with Unlimited licence to be supplied with the system. جهاز 1 0

1 بند

جدول 12 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
bench top Laboratory Glassware Washerجهاز لغسيل الزجاجيات 12 3 Integrated to laboratory bench (Undercounted, Over counter Or better ) freestanding unit with lid Touch Control and Time left display Languages: English Multi-programmes and Capable to save washing programmes Programmable up to 24 H Buzzer, acoustic signal at end of program Auto Close - Automatic door lock Waterproof and chemical resistance materials dispenser for powder and liquid detergent dispenser pump for neutralising agent demineralized washing programme External dimensions H/W/D 835/600/600 or better Suitable for all common laboratory glassware Weight [kg]: 75kg or better Time left display Frequency 50/60 Hz and Voltage 240 V with UK plug type. جهاز 1 0

1 بند

جدول 13 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
UV spectrophotometer مقياس الطيف الضوئي بالأشعة فوق البنفسجية 13 1 Wavelength range: 190 to 1,100 nm Spectral bandwidth: 1 nm (190 to 1,100 nm) Wavelength accuracy: ± 0.05 nm at D2 peak 656.1 nm,± 0.3 nm for entire range Photometric system: Double beam optics. Light source: 20-W halogen lamp and deuterium lamp Built-in light source auto position adjustment Detector: Silicon photodiode. Built in controlling panel , Capable to print and export Data PC and Printer unlimited license Software Multi-mode Measurements and Data processing Dimensions: W450 × D501 × H244 mm or better Comply with Pharmacopeia requirements جهاز 1 0

1 بند

جدول 14 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Droplet Digital PCR ddPCR القطرة الرقمية التسلسل الوراثي 14 1 • Droplet Digital PCR (ddPCR) is a method for performing digital PCR that is based on water-oil emulsion droplet technology • A sample is fractionated into 20,000 droplets, and PCR amplification of the template molecules occurs in each individual droplet. • ddPCR technology uses reagents and workflows similar to those used for most standard TaqMan probe-based assays. The massive sample partitioning is a key aspect of the ddPCR technique. • Digital PCR assays focus on the end-point analysis of each partition (droplet) to generate quantitative data. As such, amplification efficiency plays a smaller role in the outcome of the results than in qPCR; nevertheless, a proper assay should be designed and sometimes optimized to allow for clear and crisp differentiation of positive and negative droplets. • Plan to amplify a 75–200 bp product. • Absolute quantification — ddPCR technology provides an absolute count of target DNA copies per input sample without the need for running standard curves, making this technique ideal for measurements of target DNA, viral load analysis, and microbial quantification • Unparalleled precision — the massive sample partitioning afforded by ddPCR enables the reliable measurement of small fold differences in target DNA sequence copy numbers among samples • Increased signal-to-noise ratio — high-copy templates and background are diluted, effectively enriching template concentration in target-positive partitions, allowing for the sensitive detection of rare targets and enabling a ±10% precision in quantification • Removal of PCR bias — error rates are reduced by removing the amplification efficiency reliance of qPCR, enabling the detection of small (1.2-fold) differences • Simplified quantification — neither calibration standards nor a reference (the ΔΔCq method) is required for absolute quantification • Reduced consumable costs — reaction volumes are in the pico- to nanoliter ranges, reducing reagent use and the sample quantity required for each data point • Lower equipment costs — the emulsion-based reaction system means that the PCR reactions can be performed in a standard thermal cycler without complex chips or microfluidics • Superior partitioning — ddPCR technology yields 20,000 droplets per 20 µl sample, nearly two million partitioned PCR reactions in a 96-well plate, whereas chip-based digital PCR systems produce only hundreds or thousands of partitions. The greater number of partitions yields higher accuracy • Detect rare DNA target copies with unmatched sensitivity • Determine copy number variation with unrivaled accuracy • Measure gene expression levels with exquisite precision جهاز 1 0

1 بند

جدول 15 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Second generation sequencing system جهاز الجيل الثاني لتحليل الشفرة الوراثية 15 1 • The result is a highly flexible, robust, and scalable benchtop system that offers high-cluster–density flow cells to drive down the cost per gigabase (Gb) of the sequencing run. • the NextSeq 1000 Sequencing Systems feature a novel super-resolution optics system that yields highly accurate imaging data with greater resolution and higher sensitivity than traditional benchtop systems • This miniaturization provides scalability for a variety of output quantities while maintaining the same high standards of data quality • Lowers operating costs • Improves recyclability • The sequencer allows high flexibility and easy access for smaller projects like targeted re-sequencing, 16S metagenomics, small genome sequencing, with a very short turn-around time. جهاز 1 0

1 بند

جدول 16 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Mini Centrifuge جهاز طرد مركزي 16 2 MiniSpin® and MiniSpin® plus are entry-level mini centrifuges that are powerful, easy-to-use and small enough to allow individual workstations to be equipped with a portable centrifuge. 1. Rotor capacity: 12 × 1.5/2.0 mL vessels, 2 × 8-tube PCR strips 2. Max. speed: 14,100 × g (14,500 rpm) 3. Extremely compact footprint 4. Acceleration and deceleration time < 13 s 5. User-friendly digital display for time and speed 6. Metal rotor bowl 7. Separate short-spin key for fast and comfortable centrifugation 8. Optimal ventilation flow reduces heating and protects temperature-sensitive samples 9. Soft-touch lid closure for ergonomic lid locking 10. Automatic rpm/rcf conversion 11. Extended time to 99 min or continuous centrifugation جهاز 1 0

1 بند

جدول 17 المواد - توريد عام

البند الفئة الكمية وصف البند المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Wide Mini Sub Cell GT Horizontal Electrophoresis System نظام الرحلان الكهربائي الأفقي ذو الخلية الصغيرة العريضة GT صينية 15 10 سم 17 1 Wide Mini-Sub Cell GT Horizontal Electrophoresis System نظام الرحلان الكهربائي الأفقي ذو الخلية الصغيرة العريضة GT ، صينية 15 × 10 سم Horizontal electrophoresis system, includes 15- and 20-well combs, 15 x 10 cm (W x L) UV-transparent tray. 1. Easily removed QuickSnap electrodes for simple cleaning. 2. UV-transparent clear gel tray with fluorescent ruler. 3. Longer tabs on base for easy lid removal and reduced buffer spillage; lid cannot be incorrectly positioned. 4. ReadyAgarose Precast Gels lock securely into the chamber. جهاز 1 0

1 بند

جدول 18 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
NanoDrop Microvolume Spectrophotometersمقاييس الطيف الضوئي 18 1 Simple, rapid, accurate quantification and qualification of DNA, RNA, and protein. Quickly quantify DNA, RNA, and protein from only 1–2 µL of sample with Thermo Scientific NanoDrop Spectrophotometers. Our pioneering sample-retention technology has evolved across the full spectrum to bring you more knowledge about your sample, so that you can save days of troubleshooting and accelerate your research. جهاز 1 0

1 بند

جدول 19 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
ThermoMixer موزع الحرارة مع هزاز أنبوب إيبندورف حتى 24 أنبوب 19 1 1. Mixing, heating, and cooling in one instrument for high flexibility. 2. All common vessels and plate formats from 5 µL to 50 mL by different Eppendorf. 3. SmartBlocks for standard applications. 4. Ideal for cell thawing when using Eppendorf SmartBlock cryo thaw. 5. Anti-spill technology prevents lid wetting and cross-contamination. 6. Increased mixing frequency of up to 3,000 rpm for effective sample mixing. 7. Excellent temperature management for maximum temperature accuracy, resulting in safe handling. 8. Compatible with Eppendorf ThermoTop® (condens.protect®) for condensation-free sample handling (for Eppendorf SmartBlocks up to 2.0 mL). 9. Predefined program keys and clearly arranged menu guides enable simple and intuitive operations. 10. Freely programmable program keys for individual optimization. 11. Eppendorf PhysioCare Concept® provides ergonomic design and operation. جهاز 1 0

1 بند

جدول 20 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
MixMate جهاز خلط 20 1 Straight mixing required? The 3-in-1 mixer for plates, tubes, and vortex mixing. This high speed instrument provides complete mixing of your samples in seconds. Outstanding 2DMix-Control enables optimized mixing with anti-spill technology. 1- MixMate® basic device without tube holders 110 V/50 – 60 Hz (US/JP/TW) = $ 2,502.00 2- Tube Holder 1.5/2.0 mL for 24 × 1.5 mL or 2.0 mL reaction vessels = $ 63.00 3- Tube Holder 5/15 mL for 8 x 5/15 mL conical tubes = $ 141.00 4- Tube Holder PCR 96 for 96 × 0.2 mL PCR tubes, PCR strips or 1 × 96-well PCR plate, semi-skirted or unskirted = $ 63.00 5- Tube Holder 25/50 mL for 4 x 25/50 mL conical tubes = $ 141.00 جهاز 1 0

1 بند

جدول 21 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
CHEMIDOC MP IMAGING INSTRUMENT نظام التصوير لتصوير المواد الهلامية 21 1 The ChemiDoc MP Imaging System is a full-feature instrument for imaging and analyzing gels and western blots. It is designed to address multiplex fluorescent western blotting, chemiluminescence detection, general gel documentation applications, and stain-free technology imaging needs. جهاز 1 0

1 بند

جدول 22 المواد - توريد عام

البند الفئة الكمية وصف البند المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
DNA extraction AUTO library prep Auto جهاز استخلاص الحمض النووي وتحضير مكتبة الحمض النووي الالي 22 1 DNA extraction (AUTO) & library prep (Auto) جهاز استخلاص الحمض النووي وتحضير مكتبة الحمض النووي الالي • High-throughput • 45 deck positions • 0.5 - 5,000 µL pipetting volume range • Single or dual heads • Multiple single- & dual-arm configurations with Multichannel heads (96/384/Pin tool) and/or Span-8 pipetting • Large-volume 1 mL multichannel pipetting head • High-access, rotating gripper(s) with unique offset finger design • Disposable & fixed Biomek pipette tips (including septum piercing) • Transfer volumes from 0.5 µL - 5,000 µL • Independent Span-8 probe calibration • 8 channel liquid-level sensing • Supports labware from tubes to 1,536-well microplates • Accurate intra-well pipetting • Easily automate existing processes & execute quick workflow changes • Powered by icon-based software with data tracking & LIMS connectivity • Windows 10 OS • Extend walk-away operation with process management and scheduling software • Guided system setup • Automated deck framing • Data-driven method operations including hit-picking & normalization • Light curtain safety feature • Instrument status light bar • DeckOptix cameras for live, remote-monitoring & on-error video capture جهاز 1 0

1 بند

جدول 23 المواد - توريد عام

البند الفئة الكمية وصف البند المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
LC ICP MS مطياف الكتلة البلازمية المقرونة بالحث 23 1 LC-ICP-MS مطياف الكتلة البلازمية المقرونة بالحث • The system MUST attached with LC system for elements speciation which include (pump, autosampler and column oven) • LC for Speciation: Fully automated LC‐ICP‐MS operation for speciation studies for As, Cr, Hg in water & food samples Samples. It should consist of a suitable HPLC pump (600 bar or more) & autosampler sampler (100 vial capacity & 600 bar or more). System should be supplied with speciation standards & columns for As, Cr, Hg Speciation in water samples. The chromatography software module should display real-time status information on all vital analytical parameters for both the ICP‐MS and the HPLC system, HPLC Pump & Autosampler. Additional consumables :500 Nos Vials & Caps, LC Tool Kit, Glass filters-02 Nos, Rotar Seal 01,Pump Seal 01 ,Needle for Samples-01 ,PTFE Frits-5 Nos & Seat assembly -01 • Applications software must be added which include but not limit nanoparticles and any software requested by costumer The standard sample introduction shall include by default a low flow nebulizer (~0.2 mL/min), double-pass spray chamber with built in cooling to -5 °C. The ICP-MS shall have aerosol dilution capability for direct aspiration of high matrix samples to allow routine analysis of samples containing up to percent level total dissolved solids (TDS). Capability to handle with dilution gas till 25 % TDS sample matrix without any external dilution and System auto-tune should be fully automated with Using Aerosol dilution. ICPMS shall able to perform all the applications analysis (drinking water, waste water, sea water and acidified samples) with the same sample introduction to saving time and cost. ICPMS shall able to upgrade for direct analysis of organic samples. The ICP-MS Plasma shall have a maintenance-free solid-state digital drive 27 MHz RF generator. The RF power range: 500 W to 1600 W which can operate hot and cold plasma and give very stable plasma during analysis of different type of samples (aqueous, high TDS matrix sample, semi volatile organic sample and volatile organic samples) The ICP-MS shall have a double deflection Ion lens to protect the collision cell and high vacuum region from contamination which deflect ions two times with 90°, by rejecting neutral species from the ion beam to prevent any contamination reaching inside mass analyzer and decreasing the required annual maintenance. Lowest Oxide ratio < 1.5 % and double-Charged ration < 3.0 % to prevent any mass interference. The ICP-MS shall incorporate an Octopole Reaction System with fast cell gas switching capability for the most effective interference removal using kinetic energy discrimination (KED) in He mode alone and If multiple cell gases are used in a method, the cell gas shall be automatically changed with minimal switching time (~5 sec). ICP-MS shall have an orthogonal detector to deliver higher sensitivity, 90-degree bend from Quadrupole to detector to give lower background, and a wider linear dynamic range — up to 10 orders of magnitude allow to create calibration curve from 0.1 ppt to 10000 ppm with very good correlation coefficient. ICP-MS software has a user-friendly interface to make learning and using the software easier and more intuitive, without compromising power and flexibility for advanced or research Applications which including: • An early maintenance feedback function monitors instrument status and notifies you when maintenance will be needed, based upon several metrics such as operation time or number of samples measured. • Pre- and post-run performance checks to provide confidence in results and prevent unplanned downtime. • Outlier conditional formatting to highlight results that are outside a nominated range or that fail a test requirement. • Video guides for common installation, maintenance, and troubleshooting tasks are provided in an extensive Help and Learning Center. • The IntelliQuant feature, which quickly captures a full mass spectrum to create a profile of each sample’s composition. • Predeveloped methods and guided method development to fully setup methods for more challenging samples • Doubly charged interference correction to improve data quality by correcting for unexpected interferences from rare earth elements • Flexible data handling and report generation to simplify reporting. Data can be exported in a range of formats, including integration with LIMS. Mass range: 2–260 amu Sensitivity (Mcps/ppm) Li (7) ≥50 Y (89) ≥160 Tl (205) ≥80 Oxide ratio (%) CeO/Ce ≤1.5 CeO/Ce (HMI-25) ≤0.5 Doubly-charged ratio (%) Ce2+/Ce ≤3 Instrument will cover elements analysis range of concentration from 0.1 ppt to 1% for all periodic table elements except noble gases and some halide elements. Required chemical / standards will be delivered with the instruments. Exhaust will be delivered with the instrument. Required cylinders/regulators of operation will be delivered with the instrument. جهاز 1 0

1 بند

جدول 24 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
MinION oxford nanopore تقنية التسلسل الوراثي 24 1 • Size and weight W 105 mm x H 23 mm x D 33 mm • Power 5 W • Ports USB 3.0 • Sequencing of any DNA/RNA fragment length from short to ultra-long • Analysis data available in real time • Simple & rapid, or automated workflows • use flow cells which contain an array of tiny holes • Each nanopore corresponds to its own electrode connected to a channel and sensor chip, which measures the electric current that flows through the nanopore. • When a molecule passes through a nanopore, the current is disrupted to produce a characteristic ‘squiggle • The squiggle is then decoded using basecalling algorithms to determine the DNA or RNA sequence in real time. جهاز 1 0

1 بند

جدول 25 المواد - توريد عام

البند الفئة الكمية المواصفات وحدة القياس الرقم التسلسلي منتج من القائمة الإلزامية
Automatic colony counter جهاز عد المستعمرات 25 2 The unit records each pulsed colony count on the digital screen to a total of 999 counts. Pressure to count can be made by any way (pencil, or pen tip etc.). Epoxy coated casing. Reversible interior background part in white or black. Steady, (glare free) LED illumination,clear and wide view visibility. Removable plates for housing varying sizes of Petri dishes. Location for reversible contrast plates. Magnifying glass X2 with adjustable height and rotation support. CONTROL PANEL Mains switch. Numerical digital display: 3 digits. Audible confirmation beep for each count. Zero reset button. RESET. Configuration benchtop Length 30 cm (11.8 in) Width 25 cm (9.8 in) Height 23 cm (9.1 in) Weight 3.5 kg (7.7 lb) جهاز 1 0

1 بند

كراسة الشروط الرئيسية

كراسة الشروط والمواصفات وملاحق المنافسة

معلق
فتح

المستندات الداعمة (1 ملف)

معايير تقييم الأجهزة الرئيسية للمختبرات المرجعية.pdf

معلق
فتح

لم يتم ترسية هذه المنافسة بعد

الآليات

آلية التفضيل السعري للمنتج الوطني

وثائق المحتوى المحلي

معايير التقييم

معايير التقييم الفني

المستوى الاول المستوى الثاني المستوى الثالث الوزن النهائي
التقييم الفني

معايير التقييم المالي

المستوى الاول المستوى الثاني المستوى الثالث الوزن النهائي
التقييم المالي السعر التكلفة الكلية 100%

أخبار المنافسة

title تاريخ الإنشاء
value 19/02/45 08:41:15 ص
title تاريخ فتح العروض
value 26/03/45 11:10:00 ص
title تمديد تواريخ المنافسة
value تاريخ فتح العروض24/03/45 11:10:00 صآخر موعد لتقديم العروض21/03/45 11:00:00 صآخر موعد لإستلام الإستفسارات01/03/45 12:00:00 ص
title تاريخ الترسيه
value 23/09/1445