منافسة عامة
✓ مرسّى
مشروع توسعة مركز بيانات نقاء
الهيئة السعودية للبيانات والذكاء الاصطناعي
رقم المنافسة
231139005439
المعرّف
#706461
عنوان الضمان الإبتدائى
الهيئة السعودية للبيانات والذكاء الاصطناعي
الغرض من المنافسة
يهدف المشروع لتوسيع مركز بيانات نقاء في مدينة الرياض التابع الهيئة السعودية للبيانات والذكاء الاصطناعي ممثلة بمركز المعلومات الوطني لمواكبة طلبات الاستضافة والطاقة الاستيعابية لمراكز البيانات في مجال التقنيات الرقمية
| التاريخ | ميلادي | هجري |
|---|---|---|
| تاريخ النشر | 2024/05/20 15:31 | — |
| آخر موعد للاستفسارات | 2024/07/11 | 1446-01-05 |
| آخر موعد تقديم العروض | 2024/07/21 13:00 | 1446-01-15 |
| موعد فتح العروض | 2024/07/21 14:00 | 1446-01-15 |
| موعد فحص العروض | — | — |
| التاريخ المتوقع للترسية | 2024/08/21 | 1446-02-17 |
| تاريخ بدء الأعمال | 2024/09/22 | 1446-03-19 |
| تاريخ خطاب تأكيد المشاركة | — | — |
| بداية إرسال الأسئلة | 2024/07/17 | 1446-01-11 |
| أقصى مدة للإجابة | 20 يوم | |
| مكان فتح العروض | الخدمات المشتركة - لجنة فتح العروض | |
| مدة الوقفة | 5 يوم |
موقع التنفيذ
مجال التصنيف
الأنشطة
- • تقنية المعلومات
وصف المنافسة
مركز بيانات نقاء في خشم العان
جدول 1 المواد - تقنية معلومات
| البند | الفئة | الكمية | وصف البند | المواصفات | وحدة القياس | الرقم التسلسلي | الرمز الإنشائي | منتج من القائمة الإلزامية |
|---|---|---|---|---|---|---|---|---|
| مواد | VACUUM, 70L VACUUM CLEANER WET AND DRY (2-MOTOR)220 V/60HZ/2000W | 5 | VACUUM, 70L VACUUM CLEANER WET AND DRY (2-MOTOR)220 V/60HZ/2000W | VACUUM, 70L VACUUM CLEANER WET AND DRY (2-MOTOR)220 V/60HZ/2000W | عدد | 1 | 0 | |
| مواد | Tool-less blanking panel, 2 rack unit, square hole 19" (48NIC approved manufacturerm) width for 3/8" cage nut holes (may be used with or without cage nuts installed). | 5 | Tool-less blanking panel, 2 rack unit, square hole 19" (48NIC approved manufacturerm) width for 3/8" cage nut holes (may be used with or without cage nuts installed). | Tool-less blanking panel, 2 rack unit, square hole 19" (48NIC approved manufacturerm) width for 3/8" cage nut holes (may be used with or without cage nuts installed). | عدد | 2 | 0 | |
| مواد | Tool-less blanking panel, 1 rack unit, square hole 19" (48NIC approved manufacturerm) width for 3/8" cage nut holes (may be used with or without cage nuts installed). | 5 | Tool-less blanking panel, 1 rack unit, square hole 19" (48NIC approved manufacturerm) width for 3/8" cage nut holes (may be used with or without cage nuts installed). | Tool-less blanking panel, 1 rack unit, square hole 19" (48NIC approved manufacturerm) width for 3/8" cage nut holes (may be used with or without cage nuts installed). | عدد | 3 | 0 | |
| مواد | The cable identification sleeve in orange is for NIC approved manufacturerm simplex cable | 5 | The cable identification sleeve in orange is for NIC approved manufacturerm simplex cable | The cable identification sleeve in orange is for NIC approved manufacturerm simplex cable | عدد | 4 | 0 | |
| مواد | Strain Relief Bar | 5 | Strain Relief Bar | Strain Relief Bar | عدد | 5 | 0 | |
| مواد | NIC approved manufacturer, Ni-mH RECHARGABLE LED FLASH LIGHT (FMMT95154L-00) | 5 | NIC approved manufacturer, Ni-mH RECHARGABLE LED FLASH LIGHT (FMMT95154L-00) | NIC approved manufacturer, Ni-mH RECHARGABLE LED FLASH LIGHT (FMMT95154L-00) | عدد | 6 | 0 | |
| مواد | NIC approved manufacturer, 23PCS COMBINATION WRENCH 6-32 MM SET | 5 | NIC approved manufacturer, 23PCS COMBINATION WRENCH 6-32 MM SET | NIC approved manufacturer, 23PCS COMBINATION WRENCH 6-32 MM SET | عدد | 7 | 0 | |
| مواد | NIC approved manufacturer SET GEAR WRENCH SPANNER # 9416 GEAR WRENCH SPANNER | 5 | NIC approved manufacturer SET GEAR WRENCH SPANNER # 9416 GEAR WRENCH SPANNER | NIC approved manufacturer SET GEAR WRENCH SPANNER # 9416 NIC approved manufacturer | عدد | 8 | 0 | |
| مواد | NIC approved manufacturer, DIGITAL MULTI METER DM-100, AC/DC 1000v - 10Amp | 5 | NIC approved manufacturer, DIGITAL MULTI METER DM-100, AC/DC 1000v - 10Amp | NIC approved manufacturer, DIGITAL MULTI METER DM-100, AC/DC 1000v - 10Amp | عدد | 9 | 0 | |
| مواد | Horizontal Cable Manager High Capacity Front Only 1 Rack Unit. 1.7"H x 19.0"W x 6.2"D (44mm x 482mm x 157mm) | 5 | Horizontal Cable Manager High Capacity Front Only 1 Rack Unit. 1.7"H x 19.0"W x 6.2"D (44mm x 482mm x 157mm) | Horizontal Cable Manager High Capacity Front Only 1 Rack Unit. 1.7"H x 19.0"W x 6.2"D (44mm x 482mm x 157mm) | عدد | 10 | 0 | |
| مواد | Cool Boot® Raised Floor Air Sealing Grommet | 5 | Cool Boot® Raised Floor Air Sealing Grommet | Cool Boot® Raised Floor Air Sealing Grommet | عدد | 11 | 0 | |
| مواد | Blanking Foam Strips | 5 | Blanking Foam Strips | Blanking Foam Strips | عدد | 12 | 0 | |
| مواد | Auxiliary cable bracket jumper for bonding pathway sections; #6 AWG (16mm²); 18.0 (457mm) length; factory terminated on both ends with straight, two-hole, long barrel compression lugs; provided with .16 oz. (5cc) of antioxidant and four mounting screws. | 5 | Auxiliary cable bracket jumper for bonding pathway sections; #6 AWG (16mm²); 18.0 (457mm) length; factory terminated on both ends with straight, two-hole, long barrel compression lugs; provided with .16 oz. (5cc) of antioxidant and four mounting screws. | Auxiliary cable bracket jumper for bonding pathway sections; #6 AWG (16mm²); 18.0 (457mm) length; factory terminated on both ends with straight, two-hole, long barrel compression lugs; provided with .16 oz. (5cc) of antioxidant and four mounting screws. | عدد | 13 | 0 | |
| مواد | NIC approved manufacturer, 1/2'' TORQUE WRENCH 20-100NM-DUAL SCALE (N.m & IN.LB) | 5 | NIC approved manufacturer, 1/2'' TORQUE WRENCH 20-100NM-DUAL SCALE (N.m & IN.LB) | NIC approved manufacturer, 1/2'' TORQUE WRENCH 20-100NM-DUAL SCALE (N.m & IN.LB) | عدد | 14 | 0 | |
| مواد | 1.5" x 5" Cool Boot ® Cabinet Top Air Sealing Fitting | 5 | 1.5" x 5" Cool Boot ® Cabinet Top Air Sealing Fitting | 1.5" x 5" Cool Boot ® Cabinet Top Air Sealing Fitting | عدد | 15 | 0 | |
| معدات | نظام الوقود | 1 | نظام الوقود | 1) The Fuel Tank for the DG system is specified and not limited as follows: a. 24-hour base fuel tank. The tank should have a double wall thickness equal to or greater than 6mm to ensure durability and safety. b. The Fuel Supply System materials, including the Fuel Control System, consist of the following components: i. Fuel pipe, valves, pump, filling control panel, fuel polishing system, meter, sensors (including level sensors), fuel leakage system, and other necessary installation materials. These components are essential for the efficient and safe supply of fuel to the DG system. c. The Misc. Items for the DG system include: i. Connecting cables/busbars from the Genset output to the Generator Control Board, including control cables. These cables facilitate the communication and control of the DG system. d. The Factory Acceptance Test (FAT) for the DG system should be included in the price and should also cover on-site support. The FAT should comply with the DG scope and local regulations. Additionally, the price should account for the travel, accommodation, and transportation costs of at least 5 client representatives, with business class airfare and accommodation in 5-star hotels, for each FAT test visit. e. The Scope of the Site Acceptance Test (SAT) and Integrated Site Testing (IST) is as follows: i. Pretesting of the Genset at the site, start-up procedures, and a 5-day IST. The IST includes load bank testing for a full load test of each Genset, with a duration of 1 day for each Genset. f. Fuel for the pretesting, start-up, and load testing of each Genset should be included in the DG vendor's scope. However, fuel required during the IST and the first fill during handover are excluded from the vendor's scope. g. The DG system should come with a 1-year warranty, which takes effect upon completion of the Take Over Certificate (TOC). The warranty should cover unlimited working hours of operation, providing assurance and support for the DG system post-completion. | عدد | 16 | 0 | |
| معدات | نظام المياه | 1 | نظام المياه | 1) Water supply system equipment work includes the following tasks: a. Setting out and positioning of the equipment. b. Supply and installation of the necessary equipment. c. Installation of supports, hangers, and application of anti-corrosion paint. d. Supply and installation of required accessories. e. Installation of shock absorbers (damping platforms) and channel steel. f. Checking the wiring connections. g. Completion of any other tasks required for the project, not limited to the ones mentioned above, which should be accounted for in the comprehensive unit price. Including and not limited to: h. Non-negative pressure water supply equipment specifications: i. Control panel equipped with DDC (Direct Digital Control) controller. j. Water softening equipment for water treatment k. Sand filter 2) Water supply pipe work includes and not limited to: a. Grooving or trenching on the ground/wall, and restoration or outdoor excavation and filling as required. b. Supply and installation of the necessary equipment for the water supply pipe. c. Connection of pipe fittings, including plugs or blind plates. d. Installation of pipe clamps, supports, hangers, protective casing, anti-corrosion paint, or buttress. e. Installation of common steel casing through walls or floors, if applicable. f. Water flushing, disinfection, and pressure testing of the water supply pipe. g. Labelling or application of warning tape on the pipe. h. Completion of any other tasks required for the project, not limited to the ones mentioned above, which should be accounted for in the comprehensive unit price. 3) Pipe accessories work includes the following tasks: a. Supply and installation of the required equipment for the pipe accessories. b. Installation of valves, valve groups, and other necessary accessories. c. Connection of pipes using flange, thread, or clamp methods. d. Flushing the pipes with water and conducting a pressure test. e. Installation of buttresses for added support. f. Application of thermal insulation to the pipes. g. Completion of any other tasks required for the project, not limited to the ones mentioned above, which should be accounted for in the comprehensive unit price. 4) Drainage works for rain, sewage, and condenser water pipes include and limited to : a. Grooving or trenching on the ground/wall and restoration, or outdoor excavation and filling as required. b. Supply and installation of the necessary equipment for the drainage system. c. Installation of pipe connecting fittings, such as cleanouts (excluding ground cleanouts), inspection ports, and expansion joints. Additionally, cyclones should be supplied and installed. d. Supply and installation of pipe clamps, supports, hangers, or protective sleeves, as well as applying anti-corrosion paint or buttresses for added stability. e. Installation of common steel sleeves or water stop joints through walls or floors to ensure proper connection. f. Supply and installation of fire rings for fire safety requirements. g. Application of thermal insulation to the pipes. h. Conducting a ball passing test, closed water test, and water test to ensure the system's functionality. i. Completion of any other necessary tasks not explicitly mentioned above, which should be taken into account in the comprehensive unit price. | عدد | 17 | 0 | |
| معدات | نظام الحريق | 1 | نظام الحريق | Work Content: a) Supplying and installing equipment. b)Managing the receiving, unloading, warehousing, and secondary transportation of equipment, along with handling base and junction boxes, cable connections, and debugging between equipment and controlled equipment. This includes ensuring finished product protection, conducting single unit tests, single system commissioning, testing with the entire fire system, and providing all other necessary accessories and fittings. c) Completing any other items required for the successful execution of this work, including but not limited to the tasks mentioned above. These additional tasks are covered within the comprehensive unit price as per consultant approval on the following : 1) Air Sampling Detector: This includes the necessary hardware, software, and accessories. The detector has a detect distance of 50 meters. 2) Sampling Pipe: Special flame retardant PVC sampling pipe designed for early air sampling alarm systems, with a diameter of 20mm. 3) Sampling Pipe: Special flame retardant PVC sampling pipe designed for early air sampling alarm systems, with a diameter of 25mm. 4) Fire Alarm System: Supply, installation, and testing of a comprehensive alarm system for the data hall and related electrical rooms. This includes sensors, the main fire alarm control panel, extinguisher control panel, addressable manual call point, manual release button, abort switch, bell, communication cables, module box, sounder, beacon, and other necessary components. 5) Seamless steel pipe work includes the following: a. Installation of pipelines and fittings. b. Connection of pipelines using screw threads, clamps, or flanges. c. Painting and anticorrosion treatment of pipelines. d. Making and installation of supports and hangers for the pipelines. e. Rust removal and painting of supports and hangers. f. Flushing and hydrostatic testing of the pipe network. g. Fabrication and installation of casings for pipes passing through walls and floors, and sealing them with fireproof material. h. Completion of other related tasks necessary for this work, which may include additional activities not explicitly listed above, and all such items are covered by the comprehensive unit price. 6) Pipe accessories work includes the following: a. Supply and installation of equipment. b. Installation of valves, valve groups, and related accessories. c. Connection of pipes using flanges, threads, or clamps. d. Pressure testing, single unit commissioning, protection of finished products, installation of necessary accessories, and electrical wiring. e. Completion of other items required for this work, including additional tasks not specifically mentioned above, all covered by the comprehensive unit price. 7)Storage device work includes the following items that meet the drawing requirements: cabinet, fire extinguisher cylinder, hydraulic measuring device, pressure relief valve, liquid check valve, safety valve, high-pressure hose, collecting pipe, power cylinder, cylinder head valve, cylinder assembly frame, special hose, pressure signal generator, gas check valve, selector valve, low discharge and high seal valve, electromagnetic starter, driving cylinder, starting cylinder assembly frame, and other necessary components. including all valves and associated accessories Including copper pipe, metal hose, actuating cylinder, etc. of fire suppression system and Fire extinguishing agent NOVEC1230 and Filling" 8)Portable Extinguisher work includes the supply and installation of equipment with a box, along with other items necessary to complete the work, all covered by the comprehensive unit price. including the CO2 and multifunctional dry powder 8) Fire Pump equipment includes and not limited to : a) Electrical Fire pump b) Diesel fire pump c) Pressure stabilizing pump d) Air pressure tank e) GRP Water tank f) GRP Water tank g) Fire pump control cabinet h) Control cabinet of fire pressure stabilizing pump i) Dual power switching cabinet 9) Steel pipe with hot dip galvanized inner and outer walls 10) Fire hydrant cabinet work includes: a) Supply and installation of fire hydrants, which encompasses fire hydrant cabinets, fire hose reels, water guns, hose hangers, hose reels, and all necessary installation accessories. b) Completion of other items required for this work, including additional tasks not specifically mentioned above, and all such items are covered by the comprehensive unit price. c) Fire hydrant cabinet specifications: SG24D65-P fire hydrant cabinet, which consists of a fire extinguishing cabinet combined with a fire extinguisher box (Type A), one SN65 fire hydrant, one QZ19 mm water gun, and one DN65 25 m rubber lined hose. * note that the list is for estimation only. If you notice any missing items, kindly supplement them as necessary. Additionally, the quantities mentioned in this list are estimated, and it's important to refer to the detailed construction drawings for accurate information. | عدد | 18 | 0 | |
| معدات | نظام التكييف المائي | 1 | نظام التكييف المائي (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 1) The chiller system work includes the supply, installation, testing, and commissioning of the system. This encompasses tasks such as unloading, installation, testing, commissioning, builder works (sleeves, openings, supports), reinforced concrete pads for equipment, providing operational and maintenance manuals, spare parts, guarantees for electrical equipment, and connecting to all project phases. It also includes the supply of supports and accessories as per the contract documents, specifications, and drawings. a. The air-cooled chiller has a capacity of 20kw/ cabinet and operates with a water temperature of 20/28°C. The chiller should have an efficiency of less than 1.235 kW/TR and can use centrifugal or screw compressors. The supplier is responsible for supplying and installing all components of the chiller, including the chiller unit, control cabinet, CPM (Compressor Protection Module), primary pump (35L/s & 15m), vibration absorber, rubber pad, and other required parts. The chiller manufacturer should provide all necessary gateway cards mounted on the chiller according to the control schematics. The chiller should be able to operate at an ambient temperature of 55°C and include a power consumption monitoring module with Modbus protocol for DCIM/PLC feedback. b. The thermal energy storage (TES) system consists of a chilled water storage tank with an effective capacity volume in accordance with capacity. The tank is a welded steel, vault vertical storage tank with dimensions of diameter=4.5m and height=8m. It should be equipped with a fence, anti-corrosion paint, and other foundation materials. The tank should be insulated and protected with a 2" (64Kg/cu.m) fiberglass insulation, Canvas cLSh, and weatherproof coating. The tank should also include water distribution and the required temperature probes. Additionally, the tank should be equipped with relevant sensors. c. The secondary chilled water pump is a vertical inline, double suction type pump with a flow rate of 41 L/s and a pressure head of 32m. It operates at 400V, 3PH, 60Hz and includes a VFD (Variable Frequency Drive) control cabinet. The pump should be completed with a foundation and vibration isolators. The VFD should have a power consumption monitoring module with Modbus protocol for DCIM/PLC feedback. 2)Chilled water makeup system work includes the supply, installation, testing, and commissioning of the system. This encompasses tasks such as testing, commissioning, civil works (sleeves, openings, supports), and reinforced concrete pads for all equipment. It also involves providing operational and maintenance manuals during project construction, spare parts, guarantees for electrical equipment as specified in the contract documents, and connecting the system to all project phases. The work also includes the supply of supports and all necessary accessories according to the contract documents, specifications, and drawings. a) The packaged chilled water makeup pump set consists of two inline pumps, CHWMP 1 and CHWMP 2, coupled to electric motors. The set is complete with a pressure vessel and the required sensors and controls for interface with the plant control system. b) The expansion tank is constructed with carbon steel in accordance with the drawings and project specifications. 3)upply and installation of valves for the main chilled water piping system. All valves will have a cast iron body and flanged connections. Rubber flanges, epoxy painted nuts and bolts will be provided for all valves, and the torquing of the connections will be done using appropriate tools to ensure accurate torque measurement. The work also involves the supply, installation, and commissioning of butterfly, gate, and ball valves (fully legged) in accordance with the specified requirements. The valves will have a minimum 300-micron epoxy coating and will be made of cast iron/bronze, depending on the size. Stainless steel bolts and nuts will be used, as indicated in the LLD (Logic and Line Diagram) drawings. Additionally, insulation and a jacket (made of galvanized steel or aluminium plate) will be provided for the valves. 4) FAT as per the chiller scope including all tests. | عدد | 19 | 2070 | 1 |
| تدريب | دورة تصميم مركز البيانات | 1 | دورة تصميم مركز البيانات | Certified Data Centre Design Professional (CDCDP®) For 4 People for 5 Days-overseas | عدد | 20 | 0 | |
| خدمات | تجهيز مركز البيانات | 1 | تجهيز مركز البيانات | The Contractor must refer to the Drawings and Bill of Quantities (BOQ) for all relevant details regarding this section of the Works and ensure compliance with all requirements outlined therein, regardless of whether they are explicitly mentioned in the item descriptions. 1) The scope of work includes excavating for the foundation from natural ground level to the required level, regardless of the soil type, and providing two layers of 250mm thick structural fill using imported materials from the bottom of the excavation to the foundation level. Additionally, a 115mm thick layer of gravel fill, including compaction, should be placed, followed by general backfilling to the designed elevations using excavated materials, also including compaction and testing in accordance with design specifications and standard requirements. Furthermore, anti-termite measures must be implemented on the horizontal surfaces beneath the concrete foundation as per the consultant approval. 2) The work includes constructing a 200mm thick solid block work around the perimeter of the Datacentre, installing sandwich wall panels with metal sheet, insulation, supports, and fixing accessories to the external walls of the mechanical corridors, supplying and installing a 120-minute fire-rated gypsum board partition that is 200mm thick with Ferma cell Gypsum fibreboards and mineral wool insulation, supplying and installing a non-fire-rated gypsum board partition that is 50mm thick for the mechanical corridors and top of prefab modules with the required supporting frame system, and installing an aluminium louver wall between the mechanical corridor and data hall as per approved drawings and specifications 3)Blinding concrete and Construction of various elements, including footing, pedestal, grade beam, slab on grade, ramp walls, steps, and platforms, all with concrete approved design grade. This includes formworks, pouring, curing, testing, and all necessary tasks for completion. 4)Cast-in-place member reinforcement with consultant design approved reinforcement, considering the appropriate diameter. 5)Design, fabrication, and installation of embedded plates. 6)Application of a minimum of 2 coats of approved liquid waterproofing, both horizontally and vertically, to the substructure concrete. 7)Use of a minimum or as consultant approved 1000-gauge polythene sheet below the foundation, grade beam, and slab on grade. 8)supply, fabrication, transportation, and erection of various structural steel components, including: Columns-Parapet steel support-Steel members-Purlin-Bracing rods-Sag rods as per consultant approval. The work also includes the provision of bolts, nuts, washers, base plates, stiffening plates, gusset plates, cutting, welding, threading, fixing, and paint application as specified, including non-corrosion paint and fireproofing paint where required, to complete the scope of work. 10)Internal 90-minute fire-rated metal double door with frames, sub frames, ironmongery, door closers, painting, hold fasts, sealant, gaskets, separator, joints, sill, etc. As per consultant approval 11)External non-rated metal single door with frames, sub frames, ironmongery, door closers, painting, hold fasts, sealant, gaskets, separator, joints, sill, etc., as per drawings and specifications. 12)External fire-rated metal double door with frames, sub frames, ironmongery, door closers, painting, hold fasts, sealant, gaskets, separator, joints, sill, etc., as per drawings and specifications. 13) complete installation of roof metal sheets with fixing accessories, aluminium roof gutters with fixing accessories, and aluminium flashing to the parapet with fixing accessories. 14) applying epoxy paint on a cement screed bed to create a non-slip, anti-static floor, including surface preparation, primer application, copper tape, joint treatment, and the installation of epoxy skirting. 15)designing, supplying, and installing ACP cladding for the façade, considering fire rating requirements, conducting mock-ups, creating renderings, preparing shop drawings, obtaining approvals from Civil Defence if necessary, and installing entrance canopies, rainwater risers, matching terminals, fire sealants, louvers, and related components. The façade is designed to have a lifespan of 25 years or more. Additionally, internal painting will be done for gypsum board partitions and drywall linings. Non-fire-rated gypsum board drywall linings will be installed on the internal side of sandwich wall panels and prefab module walls in corridor areas, including all required fixing accessories, with sandwich wall panels priced separately. 16) fire sealant installation inside and outside the prefab modules using M/s Hilti or approved equivalent, taking into account all MEP requirements. Additionally, a non-slip epoxy floor paint with a sand finish will be applied. Stainless steel handrails will be installed for steps, ramps, and platforms. The work also involves the installation of a cat ladder complete with fittings, fixing, bolts, plates, protection cage, accessories, and painting. Vertical and horizontal expansion joints must be provided as well. * note that the list is for estimation only. If you notice any missing items, kindly supplement them as necessary. Additionally, the quantities mentioned in this list are estimated, and it's important to refer to the detailed construction drawings for accurate information. | عدد | 21 | 0 | |
| معدات | المولدات الاحتياطية | 1 | المولدات الاحتياطية | 1) Diesel Generator System includes the following: a. Supplying, installing, and starting up the Diesel Generator according to the specifications and drawing documents provided. The supplier should ensure that the Bill of Quantities (BOQ) includes all the necessary items and accessories required for the successful implementation of the project. If any items or accessories are missing in the BOQ template, the supplier should add them and highlight them accordingly. b. The scope of work also includes: c. Testing and commissioning of the Diesel Generator system. d. Supplying all necessary accessories. e. Providing warranty for the system. f. Factory Acceptance Testing (FAT). g. Training on the operation and maintenance of the system. h. Handing over the system upon completion With Providing 10 years of maintenance support. Additionally, the manufacturer needs to arrange an engineer on-site to support the testing and commissioning activities from Level 2 to Level 5. 2) The Diesel Generator Units consist of the following specifications and requirements: a) The units have a power output of 2500kW, operate on a 400V three-phase 60 Hz electrical system, and are of the containerized and continues type and Tier 3 compliance and DCG generator UL- Listed. b) refer to the electrical Single Line Diagram (SLD) for more detailed information on the units. c) The units are equipped with dry type air filters, instrumentation, and a residential type exhaust system. The exhaust system includes a double silencer with bellows and flues. d) Alarms and ancillary systems are provided for monitoring and control purposes. e) The units are designed with extended flues and air discharge to the building roof level. f) The noise level of the units complies with local standards. Acoustic enclosures, which are both sound attenuated and weatherproof, are supplied to limit the sound level to 85 dBA at a distance of 1 meter from the external wall of the genset enclosure. For a group of three gensets, the total noise level should not exceed +5 dBA from the prescribed level. g) An auxiliary power box is included to accommodate small loads such as the battery charger, fuel pump, jacket water heater, and canopy lighting. h) The units have an output of 2 * 4000A/3P with LSIG (Long-Time, Short-Time, Instantaneous, and Ground) protection release. Additionally, one Air Circuit Breaker (ACB) is provided for power outgoing, and another ACB is dedicated for load bank testing. i) Each unit is equipped with a built-in auxiliary power panel to supply power to small loads within the DG container. j) Anti-vibration springs are installed to minimize vibrations during operation. k) The alternators are equipped with anti-condensation heaters to prevent moisture buildup. l) The cooling system is designed to operate effectively in high-temperature environments, with a suitable temperature rating of 55℃. m) A jacket water heater is provided for maintaining the appropriate temperature of the engine coolant. n) Spare parts and consumables necessary for the operation and maintenance of the units are included. o) Please note that these specifications are subject to the detailed information provided in the project documentation. 3) The Automatic Main Failure (AMF) or Genset Monitoring Panel for the DG control system and BMS/DCIM Connectivity includes the following features: a. Generator Mounted Control Panel with Auto Mains Failure Function: This panel allows for the local monitoring of electrical and mechanical parameters of the DG system. It includes an Auto Mains Failure function to automatically switch the generator on in the event of a mains power failure. The panel also features a connectivity port for integration with Building Management Systems (BMS) or Data Centre Infrastructure Management (DCIM) systems. 4) The Fire Detection System & Suppression System consists of: a. Automatic Type NOVEC 1230 Fire Suppression System: This system is designed to detect and suppress fires automatically. It utilizes NOVEC 1230, a clean agent fire suppression agent, to quickly extinguish fires and minimize damage to the equipment and surrounding area. 5) The provision for Seismic Vibration Isolator between the genset and enclosure skid includes: a. Seismic Certified Inline IBC 2006, IBC 2009, IBC 2012, or Local Saudi Codes and Regulations: The genset is equipped with seismic vibration isolators that comply with the specified seismic standards. These isolators help absorb vibrations and ensure the stability of the generator during seismic events or vibrations. • Note that the details provided are based on the given information and may need to be adjusted to align with specific project requirements and local codes and regulations. | عدد | 22 | 0 | |
| معدات | شبكة مركز البيانات الداخلية | 1 | شبكة مركز البيانات الداخلية | 1)FIBER OPTIC PATCH PANEL-MODULAR CASSETTE TYPE The fiber optic patch panel shall conform to 19” rack/cabinet standards. It shall be modular cassette type equipped with single mode MPO, LC adapters/couplers panel & cable splicing tray. It shall be equipped with all Cable Management Rack or Cable Management Organizer with complete accessories as per the approved desgin. 2) UTP CAT-6A PATCH CORD: Shall meet or exceed Category 6A UTP cable specifications (100 ohms; stranded conductor; 4 pair x 23 AWG). Both ends terminated on RJ-45 plug. CONTRACTOR shall supply 100% of the total UTP Category 6 patch cables. Patch cord length on the equipment side shall be 1.5 meters long. Patch cord length on the user side shall be 3 meters or 5 meters long as per the approved desgin. 3)FIBER OPTIC PATCH CORD: Fiber optic patch cord shall be constructed from high performance 9-10/125μm Single Mode & Multimode cables. It shall be Duplex Type (MPO, LC combination as applicable) with two (2) connectors on one end and two (2) connectors on the other end. Both ends shall have color-coded both to facilitate identification of transmit and receive cores as per the approved desgin. 4) UTP CAT-6A MODULAR PATCH PANEL: 19 inch rack mountable patch panel equip with Cable Management Rack with the following specifications: a) Position jack (RJ45, 24 and/or 48 ports). b) Meet or exceed EIA/TIA 568-A Cat.6A standard. c) UL listed or approved equal. d) Based of Printed Circuit Board Technology. e) EIA/TIA-568B Termination Sequence. f) Equipped with removable Labeling Strip as per the approved desgin. 5) UTP Distribution Cable (CAT-6A): a. Distribution Cable • Unshielded Twisted Pair (UTP) • 100 ohms; solid conductor • 4-pair x 22 AWG • Shall meet Category 6A cable specification as per the approved desgin. 6) CABLE WYR GRID/CABLE TRAY (BASKET TYPE) 1. Cable Trays are used to support horizontal distribution system of the building. 2. Aluminum, 2 mm thick; 30 mm inward flange at 90 degrees; 90 mm side rail height; 2.44 M long and width as required. 3. Aluminum or Hot Dip Galvanized cable tray construction and mechanical loading shall be in accordance with NEMA VE1. Aluminum cable trays shall be C-Profile type or as required by the . 4. Cable trays fittings shall be designed and constructed exactly as the straight section with respect to side rail, material, gauge, finish and dimension. 5. All necessary accessories shall also be provided. 6. The allowable fill area for cable trays will be as requirements of NEC Article 318. 7) FIBER RUNNER OR FIBER GUIDE For installations of Fiber Optic Ducting – Raceway inside Data Centers, the Cable Ducting / Raceways shall be 8” Depth x 18” wide minimum with cover – UL listed Lightweight Vertical & Horizontal Management for Fiber Installation. Fiber Optic Raceway shall equip with complete mounting hardware & accessories (Fiber Storage Loop, Joiners, Horizontal/Vertical Elbows, Horizontal/Vertical Tees & Horizontal Cross, End Caps, Adapter, Reducer, Side Drop-Off Kit etc.). | عدد | 23 | 0 | |
| وثيقة | الخدمات الاستشارية Engineering Design and Consultancy | 1 | الخدمات الاستشارية Engineering Design and Consultancy | 1. Concept Design Validation Report solution review and recommendation reports/approval endorsement Master Plan Review Layouts Review Electrical and Mechanical Equipment Review Calculations Review 2. High Level Design Code and regulations compliances HLD design including design and calculations Schedule and rendering images 3. Enabling Package Early construction permit for all type of foundation (covering piling if there any) Bill of quantity & Tender package for early foundation and underground services constructions 4. Low Level Design Detail Design including drawing and calculations Provide design management service to manage& complete the design on time and on budget Ensure design approved by competent authorities & customer. Preparation of relevant document for competent authorities’ approval Detail Design, including not limited to: a) Civil, structure & architecture b) Electrical, mechanical, plumbing, BMS & ELV c) Firefighting & Alarm system Design will comply with Uptime Tier-III 5. Project Supervision 1)Review project plans, specifications, and contract documents. 2) Regular site inspections to verify work progress, quality, and safety standards. 3)Monitor construction activities to ensure compliance with project specifications. 4) Provide technical guidance and resolve issues or conflicts that may arise. 5) Implement quality control measures to ensure that work meets required standards. 6) Conduct inspections and tests to verify compliance with specifications and regulations. 6)Close out 1) Assist in the preparation of as-built drawings and operation and maintenance manuals. 2) Conduct final inspections and snagging to ensure that all work is completed satisfactorily. 3) Verify the completion of punch list items and ensure timely resolution. 4) Facilitate the handover of the project to the client, including necessary documentation. 5)Verify the completion of punch list items and ensure timely resolution. 6)Facilitate the handover of the project to the client, including necessary documentation. | عدد | 24 | 0 | |
| معدات | نظام الجهد المنخفض LV Panels (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 1 | نظام الجهد المنخفض LV Panels (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 1) Supply, installation, testing, and commissioning of Final Distribution Boards, which includes enclosures, circuit breakers, ELCBs, and RCBOs. The electrical drawings, specifically the Single Line Diagram (SLD), should be referred to for more detailed information. 2) For each LV panel input, the following components should be included: a. 1 or 2 incomers equipped with: (1) Three-phase power indicators protected by fuses. (2) Voltage selector switch and voltmeter protected by fuses. (3) Power monitoring unit for BMS/DCIM interface. b. For the output breakers and other components, please refer to the provided description. c. The service quotation should consider the following points: d. Wall hole retaining or drilling, supports or steel foundation, and anti-corrosion paint. e. Equipment hole drilling, inspection, and wiring. f. Equipment installation, including all protective relays, measurement devices, input VCBs, output feeders, bus couplers, interconnections, instruments, interlocks, terminals of input and output cables, cable terminal boxes and accessories, spare parts, and tools. g. Equipment grounding and repeated grounding. h. Steel support (U channel) for LV panel fixation should be included. i. Other items necessary for the completion of this work, not limited to those described above, should be considered in the comprehensive unit price. j. UL-Listed. | عدد | 25 | 2096 | 1 |
| معدات | نظام الجهد المتوسط | 1 | نظام الجهد المتوسط | 1) MV panel installation includes the following tasks: a. Supply, installation, testing, and commissioning switchgears in the MV room. This includes all protection relays, metering equipment, incoming VCBs (Vacuum Circuit Breakers), outgoing feeders, bus couplers, interconnections, instrumentation, interlocks, terminations of incoming and outgoing cables, cable terminal boxes, and necessary accessories. b. Ensuring the provision of wall holes or openings, supports or steel foundation, and applying anti-corrosion paint as required. c. Proper equipment opening, inspection, and wiring. d. Supply and installation of the switchgear body, which includes all protective relays, measurement devices, input VCBs, output feeders, bus couplers, interconnections, instruments, interlocking mechanisms, terminals for cables, cable terminal boxes, and necessary accessories. Additionally, the provision of spare parts, tools, and supports for the installation of the switchgear on the designated base or slot, as well as batteries and battery chargers. e. Implementation of equipment grounding and repeated grounding for safety and proper operation. f. Consideration of any other necessary items not explicitly mentioned above, which should be included in the comprehensive unit price.2)The MVSG-intake work involves the following tasks: 2) Supplying products that meet the requirements outlined in the Single Line Diagram (SLD) and comply fully with the specifications set by the consultant and approved design. This includes the following components: 2) 2 x inlet cubicles for 13.8kV cable incomers 3) 1 x Metering cubicle (with reserve wiring for utility power consumption meter installation) 4) 1 x load cubicle with VCB (Vacuum Circuit Breaker) 5) 1 set of DC 110V operating source panel with battery and other necessary components 6) Five-prevention device 7) Each cubicle should have dimensions of approximately 800x1500x2300mm (WxDxH) 8) The service quotation should consider, but not be limited to, the following points: 9) Fixation of the MV panel and supply/installation of 10#U Channel Steel supports with anti-corrosion painting and insulation pads for the 35kV MV Switchgears. The MV panel support should have dimensions of 0.8m (Width) x 1.5m (Depth) x 0.1m (Height). 10) If the DC 110V panel is independent and not integrated into the MV panel, the installation of the operating DC panel should also be considered. 11) Power and control wirings should be provided for the DC battery rack. 12) 13.8kV cables and routing includes an not limited to : a. Supplying, installing, testing, and commissioning of 13.8kV cables in accordance with the specifications and drawings. This includes: b. Providing all necessary cable joints, connectors, glands, shrouds, and fixing accessories for the cables. c. Ensuring proper termination of cables using termination kits. d. Laying the cables on cable ladders as indicated in the drawings. e. The scope of work should cover all aspects necessary to complete the installation of 13.8kV cables, ensuring compliance with specifications and drawings. 13) The work for the transformer includes not limited to: a. Supplying, testing, commissioning, and starting up of Dry Type Transformers, including all necessary interconnections/interfaces, instrumentations, accessories, spare parts, and tools. The installation should be carried out according to the electrical drawings and specifications. b. The service quotation should take into account the following points: c. Positioning of the equipment in the designated location. d. Creating wall holes or openings, providing equipment supports or steel foundation, and applying anti-corrosion paint as required. e. Opening the equipment for inspection and wiring purposes. f. Supplying and installing the transformer body. g. Ensuring proper equipment grounding and repeated grounding for safety. h. Conducting level tests, system interface and functional performance tests, and Integrated System Test (IST) to verify proper operation. i. Considering any other necessary items for the completion of the work, not limited to the tasks mentioned above, and including them in the comprehensive unit price. j. Including all SEC fees 14) Dry Type Transformer includes the minimum following: a. Supplying, installing, and commissioning Step Down Transformers of the specified specifications. b. Transformer type: Cast Resin Dry Type Transformer c. Voltage ratio: 13.8/0.4kV d. Power rating: 2500kVA e. Impedance voltage: Ud%=6 f. Connection: D, yn11 g. Frequency: 60Hz h. ANAF feature i. The transformer should be equipped with an off-load tap changer that allows adjusting the transformer ratio by +/- 5% in steps of 2.5% (-5%, -2.5%, 0%, +2.5%, +5%). It should have an indoor enclosure type with an IP2X protection rating. j. Additional specifications: k. Insulation class: F (155℃) l. Winding material: Copper m. The transformer should be supplied with standard accessories including lifting lugs, earthing terminal, wheels, temperature monitoring, and controller devices. Any other necessary accessories not mentioned should also be included. n. The service quotation should include, but not be limited to, the following points: Transformer installation, considering proper fixing of the transformer in place. p.FAT for Transformer | عدد | 26 | 2095 | 1 |
| معدات | نظام التكييف | 1 | نظام التكييف | 1) Fresh air handling unit are including and not limited to a. Unpacking inspection, secondary handling, setting out, and positioning; b. Equipment supply and installation; c. Supports, hangers, and anti-corrosion paint; d. Supply and installation of accessories; e. Fabrication and installation of damping pedestals; f. Flexible connection with air ducts; g. Cable connection check, including commissioning; h. Other items for the completion of this work, including but not limited to those described above, should be considered in the comprehensive unit price." 2) Fresh air conditioning unit as per the design & consultant approval 3) air duct fabrication and installation includes and not limited to with consultant approval: a. Air duct fabrication: This involves tasks such as setting out, blanking, rounding, folding, rolling, nipping, manufacturing straight ducts, duct fittings, flanges, lifting brackets, drilling, riveting, welding, upper flange assembly, and other related processes. b. Air duct installation: Activities include finding the elevation, drilling support wall holes, cooperating for reserved holes, embedding lifting brackets, assembling, placing air ducts, levelling, aligning, making pads, adding pads, bolting, and tightening. c. The scope also includes supplying and installing guide vanes, duct inspection holes, temperature and air volume measurement holes, supports, paint painting, and all necessary accessories. d. Thermal insulation and outer protective layer application for air ducts and valves. e. Installation of fire barriers and plugging through walls or floors to ensure fire safety requirements. f. Additional items necessary to complete the work, not explicitly mentioned above, should be considered in the comprehensive unit price. 4) air dampers and air vents includes and not limited to with consultant approval: a. Hole numbering, drilling, alignment, and correction to ensure proper installation. b. Making pads, padding, bolting, tightening, and conducting test-action to verify functionality. c. Supplying and installing the air dampers and air vents along with the necessary supports, painting, and all required accessories. If there are specifications outside the provided list, they should be converted to similar specifications for implementation. d. Considering other items required to complete the work, which may not be explicitly mentioned above, but should be factored into the comprehensive unit price. 5) the purge and ventilation system, specifically for fans, includes not limited to with consultant approval:: a. Unpacking inspection, secondary handling, setting out, and positioning of the fan units. b. Supplying and installing the required fan equipment. c. Providing supports, hangers, and applying anti-corrosion paint as necessary. d. Supplying and installing all accessories associated with the fan system. e. Fabricating and installing damping pedestals to ensure stability and proper functioning. f. Establishing flexible connections with the air ducts. g. Conducting cable connection checks, including commissioning, to ensure proper electrical connections. h. Considering other items required for the completion of this work, which may not be explicitly mentioned above but should be factored into the comprehensive unit price. | عدد | 27 | 0 | |
| خدمات | الاعمال الخارجية | 1 | الاعمال الخارجية | The Contractor must refer to the Drawings and Bill of Quantities (BOQ) for all relevant details regarding this section of the Works and ensure compliance with all requirements outlined therein, regardless of whether they are explicitly mentioned in the item descriptions. 1) Asphalt road -Vehicle ground: Asphalt road including necessary excavation/soil improvement and 50 mm wearing course, 100 mm asphaltic base course, prime coat, 200 mm aggregate course, 300 mm subgrade materials CBR>30 (Roads) 2) Other hardened pavements in the campus-Non-vehicle ground a. 60-thick permeable brick, coarse sand, joint sweeping, watering sealing b. 30 thick 1:6 dry cement mortar c. 40 mm gravel cushion d. Plain soil compaction" 3) Parking Space Pavement a. Earth excavation/soil improvement b. Crushed sand cushion c. 150 mm aggregate base d. Grass-planting bricks." 4) Kerb stone 5) Signage and Wayfinding a. Signage & Wayfinding including support and framing system, fittings, accessories, etc., b. Wayfinding & signage and Statutory signage to external area including but not limited to handicap sign markings, road markings, driveway lines, speed humps, pedestrian crossing hatch, etc. complete, including internal and external signage for data centre and substation, complete as per drawings and specifications" 6) Fence Wall: Supply and installation of 350 mm the blockworks boundary wall with columns minimum 3.5 meter high above inside finish ground level include excavation, preparation of surfaces, disposal of excavated materials, upholding sides of excavation, backfilling, blockworks, foundation works, complete Finishes to be plaster and paint " 7) Gate: Lift-bar electric gate; Size 5.0m * note that the list is for estimation only. If you notice any missing items, kindly supplement them as necessary. Additionally, the quantities mentioned in this list are estimated, and it's important to refer to the detailed construction drawings for accurate information. | عدد | 28 | 0 | |
| مواد | NIC approved manufacturer Sheet, 100mm x 100mm x 5mm | 5 | NIC approved manufacturer Sheet, 100mm x 100mm x 5mm | NIC approved manufacturer Sheet, 100mm x 100mm x 5mm | عدد | 29 | 0 | |
| مواد | Water Leak Cable Sensor | 5 | Water Leak Cable Sensor | Water Leak Cable Sensor | عدد | 30 | 0 | |
| مواد | VESSEL STRIPPER, WIRE STRIPPER 1.0 MM 3.2 MM #3000B MADE IN JAPAN | 5 | VESSEL STRIPPER, WIRE STRIPPER 1.0 MM 3.2 MM #3000B MADE IN JAPAN | VESSEL STRIPPER, WIRE STRIPPER 1.0 MM 3.2 MM #3000B MADE IN JAPAN | عدد | 31 | 0 | |
| مواد | Vertical blanking panels with pass-through holes for 42 RU through 48 RU cabinets. | 5 | Vertical blanking panels with pass-through holes for 42 RU through 48 RU cabinets. | Vertical blanking panels with pass-through holes for 42 RU through 48 RU cabinets. | عدد | 32 | 0 | |
| مواد | Vertical blanking panel for 600mm cabinets | 5 | Vertical blanking panel for 600mm cabinets | Vertical blanking panel for 600mm cabinets | عدد | 33 | 0 | |
| مواد | VERTICAL 0U, FULL, 30-C13 6-C19, MONITORED AND SWITCHED PER OUTLET, 230-400V, 16A, TOP-FED, 1M INPUT CORD, YELLOW | 5 | VERTICAL 0U, FULL, 30-C13 6-C19, MONITORED AND SWITCHED PER OUTLET, 230-400V, 16A, TOP-FED, 1M INPUT CORD, YELLOW | VERTICAL 0U, FULL, 30-C13 6-C19, MONITORED AND SWITCHED PER OUTLET, 230-400V, 16A, TOP-FED, 1M INPUT CORD, YELLOW | عدد | 34 | 0 | |
| مواد | VERTICAL 0U, FULL, 30-C13 6-C19, MONITORED AND SWITCHED PER OUTLET, 230-400V, 16A, TOP-FED, 1M INPUT CORD, BLUE | 5 | VERTICAL 0U, FULL, 30-C13 6-C19, MONITORED AND SWITCHED PER OUTLET, 230-400V, 16A, TOP-FED, 1M INPUT CORD, BLUE | VERTICAL 0U, FULL, 30-C13 6-C19, MONITORED AND SWITCHED PER OUTLET, 230-400V, 16A, TOP-FED, 1M INPUT CORD, BLUE | عدد | 35 | 0 | |
| مواد | Versiv Workshop Case (can hold DSX2-5000QOi/DSX2-8000QOi, Demo Stand and Fiber Artifact) | 5 | Versiv Workshop Case (can hold DSX2-5000QOi/DSX2-8000QOi, Demo Stand and Fiber Artifact) | Versiv Workshop Case (can hold DSX2-5000QOi/DSX2-8000QOi, Demo Stand and Fiber Artifact) | عدد | 36 | 0 | |
| وثيقة | Uptime Certification (TCDD & TCCF) | 1 | Uptime Certification (TCDD & TCCF) | Obtain the TCDD and TCCF certifications from Uptime Institute including all related cost | عدد | 37 | 0 | |
| معدات | UPS Lithium-battery | 1 | UPS Lithium-battery | modular design, LFP type, 81Ah/6C,support 10min@EOL The UPS battery shall be LFP (Lithium iron phosphate). And the battery system should be: • Battery Cell Material, LiFePO4 • Highly stable LFP cell, no fire after thermal runaway • Long cycle lifespan, up to 5000 cycles @ 50% DOD • Cabinet-level fire extinguishing, precise and quick firefighting, non-proliferation • Active current balance control, supporting new and old battery cabinets mixed using, flexible to expand • Smart active voltage balance control, Battery strings of different numbers of lithium batteries can be connected in parallel. | عدد | 38 | 0 | |
| معدات | UPS for mechnical load | 1 | UPS for mechnical load | modular UPS with efficiency more than 97% The UPS shall meet with the following specific requirements as a minimum: • The UPS system shall be as per the SLD would cover all capacity requirements • The UPS system shall provide continuous, transient free power to critical loads regardless of voltage and frequency deviations and outages of the normal and/or generator backed supply. • The UPS system shall support no less than 4 unit parallel. • The rated capacity of UPS power module is no less than 50kVA and supports hot swap. • It shall have a minimum efficiency of 96% at 40%~100% load for power system • It shall be an Online Double Conversion unit. • The power module, static bypass module and controller module should be hot swappable. • The input power factor shall be 0.99. • The output power factor (PF) shall be 1. • It shall be located in a LV room and shall support the data center PDU’s • It should support Lithium battery and minimum [10] minutes autonomy shall be allowed for on the UPS lithium batteries which are 10 years lifespan design（25℃ work temperature, EOL 100%）. • Each battery cell shall be monitored by DCIM. • The UPS strategy shall allow for intelligent load sharing between redundant units to maximize efficiency of the system at unit load • At Economy Control Operation (ECO) mode, the operating efficiency shall be no less than 99%. | عدد | 39 | 0 | |
| معدات | UPS for IT load | 1 | UPS for IT load | modular UPS with efficiency more than 97% The UPS shall meet with the following specific requirements as a minimum: • The UPS system shall be as per the SLD would cover all capacity requirements. • The UPS system shall provide continuous, transient free power to critical loads regardless of voltage and frequency deviations and outages of the normal and/or generator backed supply. • The UPS system shall support no less than 4 unit parallel. • The rated capacity of UPS power module is no less than 50kVA and supports hot swap. • It shall have a minimum efficiency of 96% at 40%~100% load for power system • It shall be an Online Double Conversion unit. • The power module, static bypass module and controller module should be hot swappable. • The input power factor shall be 0.99. • The output power factor (PF) shall be 1. • It shall be located in a LV room and shall support the data center PDU’s • It should support Lithium battery and minimum [10] minutes autonomy shall be allowed for on the UPS lithium batteries which are 10 years lifespan design（25℃ work temperature, EOL 100%）. • Each battery cell shall be monitored by DCIM. • The UPS strategy shall allow for intelligent load sharing between redundant units to maximize efficiency of the system at unit load • At Economy Control Operation (ECO) mode, the operating efficiency shall be no less than 99%. | عدد | 40 | 0 | |
| مواد | TRIO TORCH TORCH LIGHT | 5 | TRIO TORCH TORCH LIGHT | NIC approved manufacturer TORCH LIGHT | عدد | 41 | 0 | |
| مواد | NIC approved manufacturer M Lockout Tagout Station with Loto Devices. Lock Out Tag Out Kit Board with 4 Pack Safety Lock Set, Hasp for Padlocks, 20 Tags for Lockout Safety Supply OSHA Compliance | 5 | NIC approved manufacturer M Lockout Tagout Station with Loto Devices. Lock Out Tag Out Kit Board with 4 Pack Safety Lock Set, Hasp for Padlocks, 20 Tags for Lockout Safety Supply OSHA Compliance | NIC approved manufacturer M Lockout Tagout Station with Loto Devices. Lock Out Tag Out Kit Board with 4 Pack Safety Lock Set, Hasp for Padlocks, 20 Tags for Lockout Safety Supply OSHA Compliance | عدد | 42 | 0 | |
| مواد | NIC approved manufacturer Electrical Lockout Tagout Kit - Hasps, Clamp on and Universal Multipole Circuit Breaker Lockouts, Loto Tags, Plug Lockout, Safety Padlocks Set (1 Key Per Lock) for Lock Out Tag Out Stations | 5 | NIC approved manufacturer Electrical Lockout Tagout Kit - Hasps, Clamp on and Universal Multipole Circuit Breaker Lockouts, Loto Tags, Plug Lockout, Safety Padlocks Set (1 Key Per Lock) for Lock Out Tag Out Stations | NIC approved manufacturer Electrical Lockout Tagout Kit - Hasps, Clamp on and Universal Multipole Circuit Breaker Lockouts, Loto Tags, Plug Lockout, Safety Padlocks Set (1 Key Per Lock) for Lock Out Tag Out Stations | عدد | 43 | 0 | |
| مواد | Torque Wrench TTi15 ft·lb 3/8", 35 - 180 lbf·in o | 5 | Torque Wrench TTi15 ft·lb 3/8", 35 - 180 lbf·in o | Torque Wrench TTi15 ft·lb 3/8", 35 - 180 lbf·in o | عدد | 44 | 0 | |
| مواد | TOOLS, NIC approved manufacturer, CLAMP METER CM-100, AC/DC 600v - 1000Amp | 5 | TOOLS, NIC approved manufacturer, CLAMP METER CM-100, AC/DC 600v - 1000Amp | TOOLS, NIC approved manufacturer, CLAMP METER CM-100, AC/DC 600v - 1000Amp | عدد | 45 | 0 | |
| مواد | TMA5 Mini | 5 | TMA5 Mini | TMA5 Mini | عدد | 46 | 0 | |
| مواد | TMA40-A | 5 | TMA40-A | TMA40-A | عدد | 47 | 0 | |
| مواد | TMA-21HW | 5 | TMA-21HW | TMA-21HW | عدد | 48 | 0 | |
| مواد | This Zinc Whisker Kit also includes analysis of the sample. To assure an accurate sampling of your data center, it is recommended that you consult with a Data Clean Representative for professional guidance. | 5 | This Zinc Whisker Kit also includes analysis of the sample. To assure an accurate sampling of your data center, it is recommended that you consult with a Data Clean Representative for professional guidance. | This Zinc Whisker Kit also includes analysis of the sample. To assure an accurate sampling of your data center, it is recommended that you consult with a Data Clean Representative for professional guidance. | عدد | 49 | 0 | |
| مواد | Thermal, NIC approved manufacturer Ti480 Pro | 5 | Thermal, NIC approved manufacturer Ti480 Pro | Thermal, NIC approved manufacturer Ti480 Pro | عدد | 50 | 0 | |
| مواد | Thermal transfer raised panel component label, 1.00" W x 0.50" H, raised panel, white, 3 labels/row, 500 pc. package quantity. | 5 | Thermal transfer raised panel component label, 1.00" W x 0.50" H, raised panel, white, 3 labels/row, 500 pc. package quantity. | Thermal transfer raised panel component label, 1.00" W x 0.50" H, raised panel, white, 3 labels/row, 500 pc. package quantity. | عدد | 51 | 0 | |
| مواد | Thermal transfer component label, 3.79" W x 0.30" H, super-tack polyester, white, 1 label/row, 2500 pc. package quantity. | 5 | Thermal transfer component label, 3.79" W x 0.30" H, super-tack polyester, white, 1 label/row, 2500 pc. package quantity. | Thermal transfer component label, 3.79" W x 0.30" H, super-tack polyester, white, 1 label/row, 2500 pc. package quantity. | عدد | 52 | 0 | |
| مواد | Thermal transfer component label, 2.00" W x 1.00" H, super-tack polyester, white, 1 labels/row, 2500 pc. package quantity. | 5 | Thermal transfer component label, 2.00" W x 1.00" H, super-tack polyester, white, 1 labels/row, 2500 pc. package quantity. | Thermal transfer component label, 2.00" W x 1.00" H, super-tack polyester, white, 1 labels/row, 2500 pc. package quantity. | عدد | 53 | 0 | |
| مواد | The TX6A™ Cat 6A U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a Vari-MaTriX Tape and a flame-retardant HDPE flame-retardant jacket. The white, LSZH (IEC 60332-3, EuroClass Dca-s2,d2,a1) cable is supplied 305 meters (1,000 feet) to a reel. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | The TX6A™ Cat 6A U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a Vari-MaTriX Tape and a flame-retardant HDPE flame-retardant jacket. The white, LSZH (IEC 60332-3, EuroClass Dca-s2,d2,a1) cable is supplied 305 meters (1,000 feet) to a reel. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | The TX6A™ Cat 6A U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a Vari-MaTriX Tape and a flame-retardant HDPE flame-retardant jacket. The white, LSZH (IEC 60332-3, EuroClass Dca-s2,d2,a1) cable is supplied 305 meters (1,000 feet) to a reel. | عدد | 54 | 2094 | 1 |
| مواد | The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 4 labels per row. The label has a white colored print-on area 0.5" (12.7 mm) high for Category 5e UTP , Category 6 UTP, Category 6e, UTP, Category 5e FTP and 10 - 6 AWG, and a clear overlaminate. It is 1.0" wide and 1.5" long (25.4 x 38.1 mm) with a 3.0" (76.2 mm) core. It comes in packages of 5000. | 5 | The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 4 labels per row. The label has a white colored print-on area 0.5" (12.7 mm) high for Category 5e UTP , Category 6 UTP, Category 6e, UTP, Category 5e FTP and 10 - 6 AWG, and a clear overlaminate. It is 1.0" wide and 1.5" long (25.4 x 38.1 mm) with a 3.0" (76.2 mm) core. It comes in packages of 5000. | The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 4 labels per row. The label has a white colored print-on area 0.5" (12.7 mm) high for Category 5e UTP , Category 6 UTP, Category 6e, UTP, Category 5e FTP and 10 - 6 AWG, and a clear overlaminate. It is 1.0" wide and 1.5" long (25.4 x 38.1 mm) with a 3.0" (76.2 mm) core. It comes in packages of 5000. | عدد | 55 | 0 | |
| مواد | The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 2 labels per row. The label has a white colored print-on area 0.75" (19.1 mm) high for Category 6 FTP, Category 6a (10 Gig) UTP, Category 6e (10 Gig) FTP, 8 - 4 AWG wires, and a clear overlaminate. It is 1.0" wide and 2.25" long (25.4 x 57.2 mm) with a 3.0" (76.2 mm) core. It comes in packages of 1000. | 5 | The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 2 labels per row. The label has a white colored print-on area 0.75" (19.1 mm) high for Category 6 FTP, Category 6a (10 Gig) UTP, Category 6e (10 Gig) FTP, 8 - 4 AWG wires, and a clear overlaminate. It is 1.0" wide and 2.25" long (25.4 x 57.2 mm) with a 3.0" (76.2 mm) core. It comes in packages of 1000. | The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 2 labels per row. The label has a white colored print-on area 0.75" (19.1 mm) high for Category 6 FTP, Category 6a (10 Gig) UTP, Category 6e (10 Gig) FTP, 8 - 4 AWG wires, and a clear overlaminate. It is 1.0" wide and 2.25" long (25.4 x 57.2 mm) with a 3.0" (76.2 mm) core. It comes in packages of 1000. | عدد | 56 | 0 | |
| مواد | The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 2 labels per row. The label has a white colored print-on area 0.50" (12.7 mm) high for Category 5E UTP, Category 6 UTP, Category 6A UTP, Category 5E FTP, and 10 - 6 AWG wires, and a clear overlaminate. It is 2.0" wide and 1.5" long (50.8 x 38.1 mm) with a 3.0" (76.2 mm) core. It comes in packages of 5000. | 5 | The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 2 labels per row. The label has a white colored print-on area 0.50" (12.7 mm) high for Category 5E UTP, Category 6 UTP, Category 6A UTP, Category 5E FTP, and 10 - 6 AWG wires, and a clear overlaminate. It is 2.0" wide and 1.5" long (50.8 x 38.1 mm) with a 3.0" (76.2 mm) core. It comes in packages of 5000. | The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 2 labels per row. The label has a white colored print-on area 0.50" (12.7 mm) high for Category 5E UTP, Category 6 UTP, Category 6A UTP, Category 5E FTP, and 10 - 6 AWG wires, and a clear overlaminate. It is 2.0" wide and 1.5" long (50.8 x 38.1 mm) with a 3.0" (76.2 mm) core. It comes in packages of 5000. | عدد | 57 | 0 | |
| مواد | The T100X000VPC-BK Continuous Tape Cassette includes both label material and ribbon for easy changeover. The label cassette contains an integrated memory device for automatic formatting, recall of last legend used, and the number of labels remaining in the cassette. For use with LS8E and LS8EQ printers. Vinyl. 1" x 25' (25.4 mm x 7.6 m). Color Black on White. 1 cassette per package. | 5 | The T100X000VPC-BK Continuous Tape Cassette includes both label material and ribbon for easy changeover. The label cassette contains an integrated memory device for automatic formatting, recall of last legend used, and the number of labels remaining in the cassette. For use with LS8E and LS8EQ printers. Vinyl. 1" x 25' (25.4 mm x 7.6 m). Color Black on White. 1 cassette per package. | The T100X000VPC-BK Continuous Tape Cassette includes both label material and ribbon for easy changeover. The label cassette contains an integrated memory device for automatic formatting, recall of last legend used, and the number of labels remaining in the cassette. For use with LS8E and LS8EQ printers. Vinyl. 1" x 25' (25.4 mm x 7.6 m). Color Black on White. 1 cassette per package. | عدد | 58 | 0 | |
| مواد | NIC approved manufacturer™ G5 Temperature Sensor includes a 6.6 foot (2m) cable. The sensor measures 1.23 inches x 0.70 inches x 0.40 inches (44mm x 21mm x 11mm). | 5 | NIC approved manufacturer™ G5 Temperature Sensor includes a 6.6 foot (2m) cable. The sensor measures 1.23 inches x 0.70 inches x 0.40 inches (44mm x 21mm x 11mm). | NIC approved manufacturer™ G5 Temperature Sensor includes a 6.6 foot (2m) cable. The sensor measures 1.23 inches x 0.70 inches x 0.40 inches (44mm x 21mm x 11mm). | عدد | 59 | 0 | |
| مواد | The RGRB19CN Grounding Busbar provides the common grounding point within cabinets and is optimized for installation on 19” racks or cabinets that meet EIA-310-D. Engineered to comply with US and International grounding requirements and available pre-assembled with twenty mounting screws for quick and easy installation. | 5 | The RGRB19CN Grounding Busbar provides the common grounding point within cabinets and is optimized for installation on 19” racks or cabinets that meet EIA-310-D. Engineered to comply with US and International grounding requirements and available pre-assembled with twenty mounting screws for quick and easy installation. | The RGRB19CN Grounding Busbar provides the common grounding point within cabinets and is optimized for installation on 19” racks or cabinets that meet EIA-310-D. Engineered to comply with US and International grounding requirements and available pre-assembled with twenty mounting screws for quick and easy installation. | عدد | 60 | 0 | |
| مواد | The R100X150V1C Turn-Tell Label Cassette includes both label material and ribbon for easy changeover. The label design allows rotation for visibility from any angle - reposition on the wire/cable to align legends and improve aesthetics. Can be easily installed on existing terminated wires and assemblies without disconnecting the wires/cables. For use with LS8E and LS8EQ printers. Vinyl. 1" x 1.50" (25.4 mm x 38.1 mm). Color White. 100 labels per cassette. 1 cassette per package. | 5 | The R100X150V1C Turn-Tell Label Cassette includes both label material and ribbon for easy changeover. The label design allows rotation for visibility from any angle - reposition on the wire/cable to align legends and improve aesthetics. Can be easily installed on existing terminated wires and assemblies without disconnecting the wires/cables. For use with LS8E and LS8EQ printers. Vinyl. 1" x 1.50" (25.4 mm x 38.1 mm). Color White. 100 labels per cassette. 1 cassette per package. | The R100X150V1C Turn-Tell Label Cassette includes both label material and ribbon for easy changeover. The label design allows rotation for visibility from any angle - reposition on the wire/cable to align legends and improve aesthetics. Can be easily installed on existing terminated wires and assemblies without disconnecting the wires/cables. For use with LS8E and LS8EQ printers. Vinyl. 1" x 1.50" (25.4 mm x 38.1 mm). Color White. 100 labels per cassette. 1 cassette per package. | عدد | 61 | 0 | |
| مواد | NIC approved manufacturer™ Patch Panel Blank is an optional accessory for use in QuickNet Patch Panels that promotes proper airflow and cooling throughout data centers. The adapter is black. | 5 | NIC approved manufacturer™ Patch Panel Blank is an optional accessory for use in QuickNet Patch Panels that promotes proper airflow and cooling throughout data centers. The adapter is black. | NIC approved manufacturer™ Patch Panel Blank is an optional accessory for use in QuickNet Patch Panels that promotes proper airflow and cooling throughout data centers. The adapter is black. | عدد | 62 | 0 | |
| مواد | NIC approved manufacturer™ Patch Field Protection Cover provides a clean finish while protecting the front patch field against connector damage and fiber attenuation within 2- and 4-post racks, Net-SERV and Net-Access cabinets. The cover directly supports Optico , MiniCom, and QuickNet FAPs, adapter panels and cassettes, with the exception of Opticom Angled and QuickNet Angled Patch Panels or Angled HDQ Cassettes. | 5 | NIC approved manufacturer™ Patch Field Protection Cover provides a clean finish while protecting the front patch field against connector damage and fiber attenuation within 2- and 4-post racks, Net-SERV and Net-Access cabinets. The cover directly supports Optico , MiniCom, and QuickNet FAPs, adapter panels and cassettes, with the exception of Opticom Angled and QuickNet Angled Patch Panels or Angled HDQ Cassettes. | NIC approved manufacturer™ Patch Field Protection Cover provides a clean finish while protecting the front patch field against connector damage and fiber attenuation within 2- and 4-post racks, Net-SERV and Net-Access cabinets. The cover directly supports Optico , MiniCom, and QuickNet FAPs, adapter panels and cassettes, with the exception of Opticom Angled and QuickNet Angled Patch Panels or Angled HDQ Cassettes. | عدد | 63 | 0 | |
| مواد | NIC approved manufacturer™ Patch Field Protection Cover provides a clean finish while protecting the front patch field against connector damage and fiber attenuation within 2- and 4-post racks, Net-SERV and Net-Access cabinets. The cover directly supports Optico , MiniCom, and QuickNet FAPs, adapter panels and cassettes, with the exception of Opticom Angled and QuickNet Angled Patch Panels or Angled HDQ Cassettes. | 5 | NIC approved manufacturer™ Patch Field Protection Cover provides a clean finish while protecting the front patch field against connector damage and fiber attenuation within 2- and 4-post racks, Net-SERV and Net-Access cabinets. The cover directly supports Optico , MiniCom, and QuickNet FAPs, adapter panels and cassettes, with the exception of Opticom Angled and QuickNet Angled Patch Panels or Angled HDQ Cassettes. | NIC approved manufacturer™ Patch Field Protection Cover provides a clean finish while protecting the front patch field against connector damage and fiber attenuation within 2- and 4-post racks, Net-SERV and Net-Access cabinets. The cover directly supports Optico , MiniCom, and QuickNet FAPs, adapter panels and cassettes, with the exception of Opticom Angled and QuickNet Angled Patch Panels or Angled HDQ Cassettes. | عدد | 64 | 0 | |
| مواد | NIC approved manufacturer LS8EQ Hand-Held Thermal Transfer Printer with QWERTY keypad kit contains the hand-held printer, PANTHERLINK software, one cassette of S100X150VAC self-laminating labels, six AA alkaline batteries, the LS8-CASE rigid carrying case, the LS8-PCKIT USB cable and PC interface software, the LS8-IB protective impact bumper, the LS8-WS wrist strap, a quick reference card, and an operator's manual. | 5 | NIC approved manufacturer LS8EQ Hand-Held Thermal Transfer Printer with QWERTY keypad kit contains the hand-held printer, PANTHERLINK software, one cassette of S100X150VAC self-laminating labels, six AA alkaline batteries, the LS8-CASE rigid carrying case, the LS8-PCKIT USB cable and PC interface software, the LS8-IB protective impact bumper, the LS8-WS wrist strap, a quick reference card, and an operator's manual. | NIC approved manufacturer LS8EQ Hand-Held Thermal Transfer Printer with QWERTY keypad kit contains the hand-held printer, PANTHERLINK software, one cassette of S100X150VAC self-laminating labels, six AA alkaline batteries, the LS8-CASE rigid carrying case, the LS8-PCKIT USB cable and PC interface software, the LS8-IB protective impact bumper, the LS8-WS wrist strap, a quick reference card, and an operator's manual. | عدد | 65 | 0 | |
| مواد | NIC approved manufacturer® Open-Access® Horizontal D-Ring Cable Manager provides open and efficient access to power, coaxial and communications cables and switch ports. Thanks to a unique steel frame with modular plastic snap-in D-rings, the cable manager is not only lightweight and durable, but flexible enough to endure seamless moves, adds and changes. It is compatible with any standard EIA 19in (48NIC approved manufacturerm) rack or cabinet. D-Rings on front only, 1RU, 1pc + CMDRH1 D-ring. | 5 | NIC approved manufacturer® Open-Access® Horizontal D-Ring Cable Manager provides open and efficient access to power, coaxial and communications cables and switch ports. Thanks to a unique steel frame with modular plastic snap-in D-rings, the cable manager is not only lightweight and durable, but flexible enough to endure seamless moves, adds and changes. It is compatible with any standard EIA 19in (48NIC approved manufacturerm) rack or cabinet. D-Rings on front only, 1RU, 1pc + CMDRH1 D-ring. | NIC approved manufacturer® Open-Access® Horizontal D-Ring Cable Manager provides open and efficient access to power, coaxial and communications cables and switch ports. Thanks to a unique steel frame with modular plastic snap-in D-rings, the cable manager is not only lightweight and durable, but flexible enough to endure seamless moves, adds and changes. It is compatible with any standard EIA 19in (48NIC approved manufacturerm) rack or cabinet. D-Rings on front only, 1RU, 1pc + CMDRH1 D-ring. | عدد | 66 | 0 | |
| مواد | NIC approved manufacturer® Open-Access® Horizontal D-Ring Cable Manager provides open and efficient access to power, coaxial and communications cables and switch ports. Thanks to a unique steel frame with modular plastic snap-in D-rings, the cable manager is not only lightweight and durable, but flexible enough to endure seamless moves, adds and changes. It is compatible with any standard EIA 19in (48NIC approved manufacturerm) rack or cabinet. D-Rings on front only, 1RU, 1pc + CMDRH1 D-ring. | 5 | NIC approved manufacturer® Open-Access® Horizontal D-Ring Cable Manager provides open and efficient access to power, coaxial and communications cables and switch ports. Thanks to a unique steel frame with modular plastic snap-in D-rings, the cable manager is not only lightweight and durable, but flexible enough to endure seamless moves, adds and changes. It is compatible with any standard EIA 19in (48NIC approved manufacturerm) rack or cabinet. D-Rings on front only, 1RU, 1pc + CMDRH1 D-ring. | NIC approved manufacturer® Open-Access® Horizontal D-Ring Cable Manager provides open and efficient access to power, coaxial and communications cables and switch ports. Thanks to a unique steel frame with modular plastic snap-in D-rings, the cable manager is not only lightweight and durable, but flexible enough to endure seamless moves, adds and changes. It is compatible with any standard EIA 19in (48NIC approved manufacturerm) rack or cabinet. D-Rings on front only, 1RU, 1pc + CMDRH1 D-ring. | عدد | 67 | 0 | |
| مواد | NIC approved manufacturer® Surface Mount Box is plenum rated and accepts one Mini-Com Module. The box offers a variety of mounting options using adhesive tape or screws. The box can be identified with an adhesive label and is off white. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer® Surface Mount Box is plenum rated and accepts one Mini-Com Module. The box offers a variety of mounting options using adhesive tape or screws. The box can be identified with an adhesive label and is off white. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer® Surface Mount Box is plenum rated and accepts one Mini-Com Module. The box offers a variety of mounting options using adhesive tape or screws. The box can be identified with an adhesive label and is off white. | عدد | 68 | 2091 | 1 |
| مواد | NIC approved manufacturer® High Density Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel can be identified with adhesive labels and is black. | 5 | NIC approved manufacturer® High Density Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel can be identified with adhesive labels and is black. | NIC approved manufacturer® High Density Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel can be identified with adhesive labels and is black. | عدد | 69 | 0 | |
| مواد | NIC approved manufacturer® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is black. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is black. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is black. | عدد | 70 | 2094 | 1 |
| مواد | NIC approved manufacturer® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is white. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is white. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is white. | عدد | 71 | 2094 | 1 |
| مواد | The M300X050Y6C Polyester Marker Plate contains an integrated memory device for automatic formatting, recall of last legend used, and the number of labels remaining in the cassette. Marker plates are designed for use on larger diameter wire/cables and may be applied after all terminations are complete. Compatible with Easy-Mark Plus Labeling Software. For use with LS8E and LS8EQ printers. Polyester. 3" x 0.5" (76.2 mm x 12.7 mm). Color Yellow. 1 cassette | 5 | The M300X050Y6C Polyester Marker Plate contains an integrated memory device for automatic formatting, recall of last legend used, and the number of labels remaining in the cassette. Marker plates are designed for use on larger diameter wire/cables and may be applied after all terminations are complete. Compatible with Easy-Mark Plus Labeling Software. For use with LS8E and LS8EQ printers. Polyester. 3" x 0.5" (76.2 mm x 12.7 mm). Color Yellow. 1 cassette | The M300X050Y6C Polyester Marker Plate contains an integrated memory device for automatic formatting, recall of last legend used, and the number of labels remaining in the cassette. Marker plates are designed for use on larger diameter wire/cables and may be applied after all terminations are complete. Compatible with Easy-Mark Plus Labeling Software. For use with LS8E and LS8EQ printers. Polyester. 3" x 0.5" (76.2 mm x 12.7 mm). Color Yellow. 1 cassette | عدد | 72 | 0 | |
| مواد | The laser/ink jet self-laminating label is made of polyester is supplied on 8.5 x 11" (203.2 x 292.1 mm) sheets with 4 labels per row and 24 labels per sheet. | 5 | The laser/ink jet self-laminating label is made of polyester is supplied on 8.5 x 11" (203.2 x 292.1 mm) sheets with 4 labels per row and 24 labels per sheet. | The laser/ink jet self-laminating label is made of polyester is supplied on 8.5 x 11" (203.2 x 292.1 mm) sheets with 4 labels per row and 24 labels per sheet. | عدد | 73 | 0 | |
| مواد | The laser/ink jet self-laminating label is made of polyester is supplied on 8.5 x 11" (203.2 x 292.1 mm) sheets with 4 labels per row and 16 labels per sheet. | 5 | The laser/ink jet self-laminating label is made of polyester is supplied on 8.5 x 11" (203.2 x 292.1 mm) sheets with 4 labels per row and 16 labels per sheet. | The laser/ink jet self-laminating label is made of polyester is supplied on 8.5 x 11" (203.2 x 292.1 mm) sheets with 4 labels per row and 16 labels per sheet. | عدد | 74 | 0 | |
| مواد | The HTWC2-2-1 kit includes HTCT2-2-1 HTAP and CLRCVR2-1 clear cover and is used to tap into continuous copper conductors as a splice or pigtailing. Code conductor range is #2 – #6 AWG STR/SOL Run and Tap 1 or Flex conductors #2 – #8 AWG Run and Tap 1, code or flex #8 – #14 AWG Tap 2 and Tap 3. | 5 | The HTWC2-2-1 kit includes HTCT2-2-1 HTAP and CLRCVR2-1 clear cover and is used to tap into continuous copper conductors as a splice or pigtailing. Code conductor range is #2 – #6 AWG STR/SOL Run and Tap 1 or Flex conductors #2 – #8 AWG Run and Tap 1, code or flex #8 – #14 AWG Tap 2 and Tap 3. | The HTWC2-2-1 kit includes HTCT2-2-1 HTAP and CLRCVR2-1 clear cover and is used to tap into continuous copper conductors as a splice or pigtailing. Code conductor range is #2 – #6 AWG STR/SOL Run and Tap 1 or Flex conductors #2 – #8 AWG Run and Tap 1, code or flex #8 – #14 AWG Tap 2 and Tap 3. | عدد | 75 | 0 | |
| مواد | The HD Flex™ Cassette is OM4 MPO to LC and supports 12 fibers total. It is optimized IL and uses universal polarity. The cassette has a black cover with a black MPO connector and 6 aqua duplex LC adapters with integral shutters to prevent contamination . | 5 | The HD Flex™ Cassette is OM4 MPO to LC and supports 12 fibers total. It is optimized IL and uses universal polarity. The cassette has a black cover with a black MPO connector and 6 aqua duplex LC adapters with integral shutters to prevent contamination . | The HD Flex™ Cassette is OM4 MPO to LC and supports 12 fibers total. It is optimized IL and uses universal polarity. The cassette has a black cover with a black MPO connector and 6 aqua duplex LC adapters with integral shutters to prevent contamination . | عدد | 76 | 0 | |
| مواد | The F100X150AJC Thermal Transfer Flag Label offers improved legibility and more informational space for small wires and cables, providing clearer, more complete identification. The design allows the application of the flag as a permanent adhesive label or a repositionable non-adhesive label. Compatible with NIC approved manufacturer Easy-Mark Labeling Software. For use with LS8E and LS8EQ printers. Polyester 1.0"x1.50" (25.4mm x 38.1mm) Cable diameter 0.12"-0.20" (3.1mm - 5.2mm) Color White. 200 labels/cassette. | 5 | The F100X150AJC Thermal Transfer Flag Label offers improved legibility and more informational space for small wires and cables, providing clearer, more complete identification. The design allows the application of the flag as a permanent adhesive label or a repositionable non-adhesive label. Compatible with NIC approved manufacturer Easy-Mark Labeling Software. For use with LS8E and LS8EQ printers. Polyester 1.0"x1.50" (25.4mm x 38.1mm) Cable diameter 0.12"-0.20" (3.1mm - 5.2mm) Color White. 200 labels/cassette. | The F100X150AJC Thermal Transfer Flag Label offers improved legibility and more informational space for small wires and cables, providing clearer, more complete identification. The design allows the application of the flag as a permanent adhesive label or a repositionable non-adhesive label. Compatible with NIC approved manufacturer Easy-Mark Labeling Software. For use with LS8E and LS8EQ printers. Polyester 1.0"x1.50" (25.4mm x 38.1mm) Cable diameter 0.12"-0.20" (3.1mm - 5.2mm) Color White. 200 labels/cassette. | عدد | 77 | 0 | |
| مواد | The CT-1701 Controlled Cycle Tool features a controlled-cycle crimping ratchet mechanism along with a ergonomic design which provides low handle effort for crimping. | 5 | The CT-1701 Controlled Cycle Tool features a controlled-cycle crimping ratchet mechanism along with a ergonomic design which provides low handle effort for crimping. | The CT-1701 Controlled Cycle Tool features a controlled-cycle crimping ratchet mechanism along with a ergonomic design which provides low handle effort for crimping. | عدد | 78 | 0 | |
| مواد | The CNBK High Carbon Steel Bonding Cage Nut Kit creates an electrical bond between the mounting rails and equipment that conforms to EIA-310 specifications for racks and cabinets. The CNBK Bonding Cage Nut Kit is made from high carbon steel and installed with a Phillips, flat blade, or nut screwdriver. | 5 | The CNBK High Carbon Steel Bonding Cage Nut Kit creates an electrical bond between the mounting rails and equipment that conforms to EIA-310 specifications for racks and cabinets. The CNBK Bonding Cage Nut Kit is made from high carbon steel and installed with a Phillips, flat blade, or nut screwdriver. | The CNBK High Carbon Steel Bonding Cage Nut Kit creates an electrical bond between the mounting rails and equipment that conforms to EIA-310 specifications for racks and cabinets. The CNBK Bonding Cage Nut Kit is made from high carbon steel and installed with a Phillips, flat blade, or nut screwdriver. | عدد | 79 | 0 | |
| مواد | The Cat 6A UTP field term plug terminates 4-pair, 22-26 AWG, 100 ohm, UTP twisted pair cable and is backwards compatible with Cat 6 and 5e. The plug utilizes TG style technology to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. This plug simplifies installation of common devices such as cameras and wireless access points. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | The Cat 6A UTP field term plug terminates 4-pair, 22-26 AWG, 100 ohm, UTP twisted pair cable and is backwards compatible with Cat 6 and 5e. The plug utilizes TG style technology to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. This plug simplifies installation of common devices such as cameras and wireless access points. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | The Cat 6A UTP field term plug terminates 4-pair, 22-26 AWG, 100 ohm, UTP twisted pair cable and is backwards compatible with Cat 6 and 5e. The plug utilizes TG style technology to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. This plug simplifies installation of common devices such as cameras and wireless access points. | عدد | 80 | 2094 | 1 |
| مواد | The cable identification sleeve in white is for NIC approved manufacturerm duplex fiber cable with labels S200X225YAJ (laser/inkjet) and S100X225VATY (thermal transfer printer). It is 2" long and made of flexible PVC. It comes in 100-piece packages. | 5 | The cable identification sleeve in white is for NIC approved manufacturerm duplex fiber cable with labels S200X225YAJ (laser/inkjet) and S100X225VATY (thermal transfer printer). It is 2" long and made of flexible PVC. It comes in 100-piece packages. | The cable identification sleeve in white is for NIC approved manufacturerm duplex fiber cable with labels S200X225YAJ (laser/inkjet) and S100X225VATY (thermal transfer printer). It is 2" long and made of flexible PVC. It comes in 100-piece packages. | عدد | 81 | 0 | |
| مواد | The cable identification sleeve in white is for NIC approved manufacturerm duplex fiber cable with labels S200X225YAJ (laser/inkjet) , It is 2" long and made of flexible PVC | 5 | The cable identification sleeve in white is for NIC approved manufacturerm duplex fiber cable with labels S200X225YAJ (laser/inkjet) , It is 2" long and made of flexible PVC | The cable identification sleeve in white is for NIC approved manufacturerm duplex fiber cable with labels S200X225YAJ (laser/inkjet) , It is 2" long and made of flexible PVC | عدد | 82 | 0 | |
| معدات | Temporary load bank | 1 | Temporary load bank | Supply , installation of temporary load banks for the UPS,DG and L5 and TCCF test | عدد | 83 | 0 | |
| مواد | TDP4NIC approved manufacturerE/E printer kit. Includes: printer, NIC approved manufacturer® Easy-Mark™ Labeling Software, RMEH4BL black hybrid ribbon, user manual, quick start card, TDP4NIC approved manufacturerE-CASE carrying case, one roll S100X150VATY labels, roll stand, driver disk, USB cable, AC power adapter with the following power cords: EuroPlug, Swiss, UK, and Japan JIS 8303 3-pin; for use outside North America. | 5 | TDP4NIC approved manufacturerE/E printer kit. Includes: printer, NIC approved manufacturer® Easy-Mark™ Labeling Software, RMEH4BL black hybrid ribbon, user manual, quick start card, TDP4NIC approved manufacturerE-CASE carrying case, one roll S100X150VATY labels, roll stand, driver disk, USB cable, AC power adapter with the following power cords: EuroPlug, Swiss, UK, and Japan JIS 8303 3-pin; for use outside North America. | TDP4NIC approved manufacturerE/E printer kit. Includes: printer, NIC approved manufacturer® Easy-Mark™ Labeling Software, RMEH4BL black hybrid ribbon, user manual, quick start card, TDP4NIC approved manufacturerE-CASE carrying case, one roll S100X150VATY labels, roll stand, driver disk, USB cable, AC power adapter with the following power cords: EuroPlug, Swiss, UK, and Japan JIS 8303 3-pin; for use outside North America. | عدد | 84 | 0 | |
| مواد | Tach-20 Contact and Non-Contact Tachometer | 5 | Tach-20 Contact and Non-Contact Tachometer | Tach-20 Contact and Non-Contact Tachometer | عدد | 85 | 0 | |
| مواد | Supply Rack ATS, 230V, 32A, IEC 309 in, (16) C13 (2) C19 out | 5 | Supply Rack ATS, 230V, 32A, IEC 309 in, (16) C13 (2) C19 out | Supply Rack ATS, 230V, 32A, IEC 309 in, (16) C13 (2) C19 out | عدد | 86 | 0 | |
| مواد | Supply RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT | 5 | Supply RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT | Supply RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT | عدد | 87 | 0 | |
| مواد | Supply Modular Power Distribution 277kVA, 400V | 5 | Supply Modular Power Distribution 277kVA, 400V | Supply Modular Power Distribution 277kVA, 400V | عدد | 88 | 0 | |
| مواد | Supply Modular Power Distribution 138kVA, 400V | 5 | Supply Modular Power Distribution 138kVA, 400V | Supply Modular Power Distribution 138kVA, 400V | عدد | 89 | 0 | |
| مواد | Supply and Test PDM3532IEC-600 NIC approved manufacturer IT Power Distribution Module 3 Pole 5 Wire 32A IEC309 600cm include circuit breaker, cable extender, power cord, power connection, and circuit monitoring. | 5 | Supply and Test PDM3532IEC-600 NIC approved manufacturer IT Power Distribution Module 3 Pole 5 Wire 32A IEC309 600cm include circuit breaker, cable extender, power cord, power connection, and circuit monitoring. | Supply and Test PDM3532IEC-600 NIC approved manufacturer IT Power Distribution Module 3 Pole 5 Wire 32A IEC309 600cm include circuit breaker, cable extender, power cord, power connection, and circuit monitoring. | عدد | 90 | 0 | |
| مواد | Supply and Test PDM3516IEC-600 NIC approved manufacturer IT Power Distribution Module 3 Pole 5 Wire 16A IEC309 600cm, include circuit breaker, power cord, cable extender, power connection, and circuit monitoring | 5 | Supply and Test PDM3516IEC-600 NIC approved manufacturer IT Power Distribution Module 3 Pole 5 Wire 16A IEC309 600cm, include circuit breaker, power cord, cable extender, power connection, and circuit monitoring | Supply and Test PDM3516IEC-600 NIC approved manufacturer IT Power Distribution Module 3 Pole 5 Wire 16A IEC309 600cm, include circuit breaker, power cord, cable extender, power connection, and circuit monitoring | عدد | 91 | 0 | |
| مواد | Supply and Test PDM1332IEC-3P-3 NIC approved manufacturer IT Power Distribution Module 3x1 Pole 3 Wire 32A 3xIEC309 300cm, 360cm, 420cm include circuit breaker, cable extender power cord, power connection, and circuit monitoring. | 5 | Supply and Test PDM1332IEC-3P-3 NIC approved manufacturer IT Power Distribution Module 3x1 Pole 3 Wire 32A 3xIEC309 300cm, 360cm, 420cm include circuit breaker, cable extender power cord, power connection, and circuit monitoring. | Supply and Test PDM1332IEC-3P-3 NIC approved manufacturer IT Power Distribution Module 3x1 Pole 3 Wire 32A 3xIEC309 300cm, 360cm, 420cm include circuit breaker, cable extender power cord, power connection, and circuit monitoring. | عدد | 92 | 0 | |
| مواد | Step Stool Cramer Kik-Step (Black) | 5 | Step Stool Cramer Kik-Step (Black) | Step Stool Cramer Kik-Step (Black) | عدد | 93 | 0 | |
| مواد | NIC approved manufacturer,SAFETY SHOES HARTNIC approved manufacturer HONEY NUBUCK # 43 (STA10003-103-9) | 5 | NIC approved manufacturer,SAFETY SHOES HARTNIC approved manufacturer HONEY NUBUCK # 43 (STA10003-103-9) | NIC approved manufacturer,SAFETY SHOES HARTFORD HONEY NUBUCK # 43 (STA10003-103-9) | عدد | 94 | 0 | |
| مواد | NIC approved manufacturer, TRU LASER MEASUR 30MTR TLM 99 | 5 | NIC approved manufacturer, TRU LASER MEASUR 30MTR TLM 99 | NIC approved manufacturer, TRU LASER MEASUR 30MTR TLM 99 | عدد | 95 | 0 | |
| مواد | NIC approved manufacturer, SCREWDRIVER INSULATED 6PCS SET SLOT 50,75,150MM/ PZ 100,125MM/VOLT TESTER | 5 | NIC approved manufacturer, SCREWDRIVER INSULATED 6PCS SET SLOT 50,75,150MM/ PZ 100,125MM/VOLT TESTER | NIC approved manufacturer, SCREWDRIVER INSULATED 6PCS SET SLOT 50,75,150MM/ PZ 100,125MM/VOLT TESTER | عدد | 96 | 0 | |
| مواد | NIC approved manufacturer, MULTIBIT STUBY SCREW DRIVER SET | 5 | NIC approved manufacturer, MULTIBIT STUBY SCREW DRIVER SET | NIC approved manufacturer, MULTIBIT STUBY SCREW DRIVER SET | عدد | 97 | 0 | |
| مواد | NIC approved manufacturer, MEASURING TAPE- 5 MTR/16 FT LENGTH | 5 | NIC approved manufacturer, MEASURING TAPE- 5 MTR/16 FT LENGTH | NIC approved manufacturer, MEASURING TAPE- 5 MTR/16 FT LENGTH | عدد | 98 | 0 | |
| مواد | NIC approved manufacturer, LONG NOSE PLIER 203 MM | 5 | NIC approved manufacturer, LONG NOSE PLIER 203 MM | NIC approved manufacturer, LONG NOSE PLIER 203 MM | عدد | 99 | 0 | |
| مواد | NIC approved manufacturer, LOCKING PLIERS 225 MM/ 9'' STRAIGHT JAW (STHT84371-8) | 5 | NIC approved manufacturer, LOCKING PLIERS 225 MM/ 9'' STRAIGHT JAW (STHT84371-8) | NIC approved manufacturer, LOCKING PLIERS 225 MM/ 9'' STRAIGHT JAW (STHT84371-8) | عدد | 100 | 0 | |
| مواد | NIC approved manufacturer, HEX KEY SET 10PCS 1.5 - 10 MM | 5 | NIC approved manufacturer, HEX KEY SET 10PCS 1.5 - 10 MM | NIC approved manufacturer, HEX KEY SET 10PCS 1.5 - 10 MM | عدد | 101 | 0 | |
| مواد | NIC approved manufacturer, HAMMER 16 OZ CLAW F/GLASS | 5 | NIC approved manufacturer, HAMMER 16 OZ CLAW F/GLASS | NIC approved manufacturer, HAMMER 16 OZ CLAW F/GLASS | عدد | 102 | 0 | |
| مواد | NIC approved manufacturer, FOLDING KNIFE WOODEN HANDLE | 5 | NIC approved manufacturer, FOLDING KNIFE WOODEN HANDLE | NIC approved manufacturer, FOLDING KNIFE WOODEN HANDLE | عدد | 103 | 0 | |
| مواد | NIC approved manufacturer, FATMAX LED HEAD LAMP 200 LUMEN AAA (FMHT81509) | 5 | NIC approved manufacturer, FATMAX LED HEAD LAMP 200 LUMEN AAA (FMHT81509) | NIC approved manufacturer, FATMAX LED HEAD LAMP 200 LUMEN AAA (FMHT81509) | عدد | 104 | 0 | |
| مواد | NIC approved manufacturer, DYNAGRIP SNAP OFF BLADE KNIFE MP018 | 5 | NIC approved manufacturer, DYNAGRIP SNAP OFF BLADE KNIFE MP018 | NIC approved manufacturer, DYNAGRIP SNAP OFF BLADE KNIFE MP018 | عدد | 105 | 0 | |
| مواد | NIC approved manufacturer, CHROMED HACKSAW FRAME 12" | 5 | NIC approved manufacturer, CHROMED HACKSAW FRAME 12" | NIC approved manufacturer, CHROMED HACKSAW FRAME 12" | عدد | 106 | 0 | |
| مواد | NIC approved manufacturer, 6 PCS SCREWDRIVER SET | 5 | NIC approved manufacturer, 6 PCS SCREWDRIVER SET | NIC approved manufacturer, 6 PCS SCREWDRIVER SET | عدد | 107 | 0 | |
| مواد | NIC approved manufacturer, 5 TRAY METAL TOOL BOX 20.8 x 20.8 x 45 CM | 5 | NIC approved manufacturer, 5 TRAY METAL TOOL BOX 20.8 x 20.8 x 45 CM | NIC approved manufacturer, 5 TRAY METAL TOOL BOX 20.8 x 20.8 x 45 CM | عدد | 108 | 0 | |
| مواد | NIC approved manufacturer, 1/2" DRIVE M10-M32 SOCKET SET 27 PCS | 5 | NIC approved manufacturer, 1/2" DRIVE M10-M32 SOCKET SET 27 PCS | NIC approved manufacturer, 1/2" DRIVE M10-M32 SOCKET SET 27 PCS | عدد | 109 | 0 | |
| مواد | NIC approved manufacturer VICE GRIP NIC approved manufacturer VICE GRIP # NIC approved manufacturer -0-84-811 | 5 | NIC approved manufacturer VICE GRIP NIC approved manufacturer VICE GRIP # NIC approved manufacturer -0-84-811 | NIC approved manufacturer VICE GRIP NIC approved manufacturer VICE GRIP # NIC approved manufacturer -0-84-811 | عدد | 110 | 0 | |
| مواد | NIC approved manufacturer , PRESSURE WASHER SSW19-B5 | 5 | NIC approved manufacturer , PRESSURE WASHER SSW19-B5 | NIC approved manufacturer , PRESSURE WASHER SSW19-B5 | عدد | 111 | 0 | |
| مواد | NIC approved manufacturer NIC approved manufacturer HAMMER #STHTO-51309 | 5 | NIC approved manufacturer NIC approved manufacturer HAMMER #STHTO-51309 | NIC approved manufacturer NIC approved manufacturer HAMMER #STHTO-51309 | عدد | 112 | 0 | |
| مواد | Soft Asile containment, Wall Panels - Used to create airflow barriers above equipment racks or between racks. Strip Doors - Used to create airflow barriers at ends of equipment aisles or other areas where access through the barrier is required. Also used in narrow width applications instead of curtain panels. Molded Curtain Corners - Used to create a better airflow seal between perpendicular curtain runs. | 5 | Soft Asile containment, Wall Panels - Used to create airflow barriers above equipment racks or between racks. Strip Doors - Used to create airflow barriers at ends of equipment aisles or other areas where access through the barrier is required. Also used in narrow width applications instead of curtain panels. Molded Curtain Corners - Used to create a better airflow seal between perpendicular curtain runs. | Soft Asile containment, Wall Panels - Used to create airflow barriers above equipment racks or between racks. Strip Doors - Used to create airflow barriers at ends of equipment aisles or other areas where access through the barrier is required. Also used in narrow width applications instead of curtain panels. Molded Curtain Corners - Used to create a better airflow seal between perpendicular curtain runs. | عدد | 113 | 0 | |
| مواد | NIC approved manufacturer™ G5 Three Temperature + Humidity Sensor. With a 6.6' (2m) cable; the sensor measures 1.23 x 0.70 x 0.40 inches (44 x 21 x 11 mm). | 5 | NIC approved manufacturer™ G5 Three Temperature + Humidity Sensor. With a 6.6' (2m) cable; the sensor measures 1.23 x 0.70 x 0.40 inches (44 x 21 x 11 mm). | NIC approved manufacturer™ G5 Three Temperature + Humidity Sensor. With a 6.6' (2m) cable; the sensor measures 1.23 x 0.70 x 0.40 inches (44 x 21 x 11 mm). | عدد | 114 | 0 | |
| مواد | NIC approved manufacturer™ G5 Electronic Swinghandle with Low Frequency (125 kHz) Card Reader. Measures 8.4 x 1.46 x 1.97 inches (213 x 37 x 50 mm). | 5 | NIC approved manufacturer™ G5 Electronic Swinghandle with Low Frequency (125 kHz) Card Reader. Measures 8.4 x 1.46 x 1.97 inches (213 x 37 x 50 mm). | NIC approved manufacturer™ G5 Electronic Swinghandle with Low Frequency (125 kHz) Card Reader. Measures 8.4 x 1.46 x 1.97 inches (213 x 37 x 50 mm). | عدد | 115 | 0 | |
| مواد | NIC approved manufacturer™ G5 Access Hub Harness Hot Aisle for ACE02 & ACE03. The harness measures 8.5' (2.6m) in length. | 5 | NIC approved manufacturer™ G5 Access Hub Harness Hot Aisle for ACE02 & ACE03. The harness measures 8.5' (2.6m) in length. | NIC approved manufacturer™ G5 Access Hub Harness Hot Aisle for ACE02 & ACE03. The harness measures 8.5' (2.6m) in length. | عدد | 116 | 0 | |
| مواد | NIC approved manufacturer™ G5 Access Hub Harness Cold Aisle for ACE02 & ACE03. The harness measures 9.8' (NIC approved manufacturer) in length. | 5 | NIC approved manufacturer™ G5 Access Hub Harness Cold Aisle for ACE02 & ACE03. The harness measures 9.8' (NIC approved manufacturer) in length. | NIC approved manufacturer™ G5 Access Hub Harness Cold Aisle for ACE02 & ACE03. The harness measures 9.8' (NIC approved manufacturer) in length. | عدد | 117 | 0 | |
| مواد | NIC approved manufacturer™ G5 Access Hub for Electronic Handle (cold & hot aisle selectable). The hub measures 3.74 x 1.46 x 1.14 inches (95 x 37 x 29 mm). | 5 | NIC approved manufacturer™ G5 Access Hub for Electronic Handle (cold & hot aisle selectable). The hub measures 3.74 x 1.46 x 1.14 inches (95 x 37 x 29 mm). | NIC approved manufacturer™ G5 Access Hub for Electronic Handle (cold & hot aisle selectable). The hub measures 3.74 x 1.46 x 1.14 inches (95 x 37 x 29 mm). | عدد | 118 | 0 | |
| مواد | SM-20A Sound Meter | 5 | SM-20A Sound Meter | SM-20A Sound Meter | عدد | 119 | 0 | |
| خدمات | Site Preparation تجهيز الموقع | 1 | Site Preparation تجهيز الموقع | 1) Demolition of existing buildings, foundation, boundary wall, and pavement, and transportation of the debris to a designated dumping site. 2) Re-routing of existing underground facilities, as necessary, to accommodate the new development. 3) Clearing and preparation of the site within the plot limit, including the removal of debris and stockpiling/disposal in a designated area. This process also includes the stripping of topsoil (at least 100mm thick). 4) Backfilling the entire site with imported materials up to a depth of 500mm from the natural ground level. This ensures a stable foundation for the future construction. | عدد | 120 | 0 | |
| مواد | Singlemode Launch Cable, 9µm, SC/LC (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Singlemode Launch Cable, 9µm, SC/LC (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Singlemode Launch Cable, 9µm, SC/LC | عدد | 121 | 2094 | 1 |
| مواد | Sensor pod optimized for rack mounting that supports 6 Universal Sensors. | 5 | Sensor pod optimized for rack mounting that supports 6 Universal Sensors. | Sensor pod optimized for rack mounting that supports 6 Universal Sensors. | عدد | 122 | 0 | |
| مواد | Self laminating label for copper cable - Sheets (1k), 2500 per PKG | 5 | Self laminating label for copper cable - Sheets (1k), 2500 per PKG | Self laminating label for copper cable - Sheets (1k), 2500 per PKG | عدد | 123 | 0 | |
| مواد | Section Lifter for raised floor | 5 | Section Lifter for raised floor | Section Lifter for raised floor | عدد | 124 | 0 | |
| مواد | NIC approved manufacturer Hydraulic crimping machine YQK-300 16-240mm hydraulic crimping tool with storage case | 5 | NIC approved manufacturer Hydraulic crimping machine YQK-300 16-240mm hydraulic crimping tool with storage case | NIC approved manufacturer Hydraulic crimping machine YQK-300 16-240mm hydraulic crimping tool with storage case | عدد | 125 | 0 | |
| مواد | NIC approved manufacturer 5 Shelf Chipboard, Galvanised Steel Eco-Rax Free Standing Shelves, 1800mm x 900mm x 600mm, 265kg Load | 5 | NIC approved manufacturer 5 Shelf Chipboard, Galvanised Steel Eco-Rax Free Standing Shelves, 1800mm x 900mm x 600mm, 265kg Load | NIC approved manufacturer 5 Shelf Chipboard, Galvanised Steel Eco-Rax Free Standing Shelves, 1800mm x 900mm x 600mm, 265kg Load | عدد | 126 | 0 | |
| مواد | NIC approved manufacturer, CRIMPING TOOL WITH 12PCS DIE SET (16MM-400MM) MADE IN USA | 5 | NIC approved manufacturer, CRIMPING TOOL WITH 12PCS DIE SET (16MM-400MM) MADE IN USA | NIC approved manufacturer, CRIMPING TOOL WITH 12PCS DIE SET (16MM-400MM) MADE IN USA | عدد | 127 | 0 | |
| مواد | NIC approved manufacturer, CRIMPING TOOL W/DIE 16-300 MADE IN USA | 5 | NIC approved manufacturer, CRIMPING TOOL W/DIE 16-300 MADE IN USA | NIC approved manufacturer, CRIMPING TOOL W/DIE 16-300 MADE IN USA | عدد | 128 | 0 | |
| مواد | NIC approved manufacturer, CRIMPING TOOL W/DIE 16-300 MADE IN USA | 5 | NIC approved manufacturer, CRIMPING TOOL W/DIE 16-300 MADE IN USA | NIC approved manufacturer, CRIMPING TOOL W/DIE 16-300 MADE IN USA | عدد | 129 | 0 | |
| مواد | NIC approved manufacturer, CLAMP METER CM-100, AC/DC 600v - 1000Amp | 5 | NIC approved manufacturer, CLAMP METER CM-100, AC/DC 600v - 1000Amp | NIC approved manufacturer, CLAMP METER CM-100, AC/DC 600v - 1000Amp | عدد | 130 | 0 | |
| مواد | REACH, FIBER STEP LADDER A -TYPE 7 STEP - 2.0 MTR MADE IN UAE | 5 | REACH, FIBER STEP LADDER A -TYPE 7 STEP - 2.0 MTR MADE IN UAE | NIC approved manufacturer, FIBER STEP LADDER A -TYPE 7 STEP - 2.0 MTR MADE IN UAE | عدد | 131 | 0 | |
| مواد | Rack PDU 2G, Metered, ZeroU, 32A, 230V, (36) C13 & (6) C19, Full Paint Orange | 5 | Rack PDU 2G, Metered, ZeroU, 32A, 230V, (36) C13 & (6) C19, Full Paint Orange | Rack PDU 2G, Metered, ZeroU, 32A, 230V, (36) C13 & (6) C19, Full Paint Orange | عدد | 132 | 0 | |
| مواد | Rack PDU 2G, Metered, ZeroU, 32A, 230V, (36) C13 & (6) C19, Full Paint Blue | 5 | Rack PDU 2G, Metered, ZeroU, 32A, 230V, (36) C13 & (6) C19, Full Paint Blue | Rack PDU 2G, Metered, ZeroU, 32A, 230V, (36) C13 & (6) C19, Full Paint Blue | عدد | 133 | 0 | |
| مواد | Rack PDU 2G, Metered, ZeroU, 22.0kW(32A), 230V, (30) C13 & (12) C19, Full Paint Orange | 5 | Rack PDU 2G, Metered, ZeroU, 22.0kW(32A), 230V, (30) C13 & (12) C19, Full Paint Orange | Rack PDU 2G, Metered, ZeroU, 22.0kW(32A), 230V, (30) C13 & (12) C19, Full Paint Orange | عدد | 134 | 0 | |
| مواد | Rack PDU 2G, Metered, ZeroU, 22.0kW(32A), 230V, (30) C13 & (12) C19, Full Paint Blue | 5 | Rack PDU 2G, Metered, ZeroU, 22.0kW(32A), 230V, (30) C13 & (12) C19, Full Paint Blue | Rack PDU 2G, Metered, ZeroU, 22.0kW(32A), 230V, (30) C13 & (12) C19, Full Paint Blue | عدد | 135 | 0 | |
| مواد | Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 11.0kW, 230V, (21) C13 & (3) C19, Paint Orange | 5 | Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 11.0kW, 230V, (21) C13 & (3) C19, Paint Orange | Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 11.0kW, 230V, (21) C13 & (3) C19, Paint Orange | عدد | 136 | 0 | |
| مواد | Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 11.0kW, 230V, (21) C13 & (3) C19, Paint Blue | 5 | Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 11.0kW, 230V, (21) C13 & (3) C19, Paint Blue | Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 11.0kW, 230V, (21) C13 & (3) C19, Paint Blue | عدد | 137 | 0 | |
| مواد | QuickNet patch panel 48 Flat | 5 | QuickNet patch panel 48 Flat | QuickNet patch panel 48 Flat | عدد | 138 | 0 | |
| مواد | QuickNet patch panel 48 Angled | 5 | QuickNet patch panel 48 Angled | QuickNet patch panel 48 Angled | عدد | 139 | 0 | |
| مواد | QuickNet patch panel 24 Flat | 5 | QuickNet patch panel 24 Flat | QuickNet patch panel 24 Flat | عدد | 140 | 0 | |
| مواد | Quick Clean Cleaner MPO 12/24 Fiber, 5 Pack | 5 | Quick Clean Cleaner MPO 12/24 Fiber, 5 Pack | Quick Clean Cleaner MPO 12/24 Fiber, 5 Pack | عدد | 141 | 0 | |
| مواد | Quick Clean Cleaner 2.5 mm Fiber - SC, ST, FC, E2000, 5 pack | 5 | Quick Clean Cleaner 2.5 mm Fiber - SC, ST, FC, E2000, 5 pack | Quick Clean Cleaner 2.5 mm Fiber - SC, ST, FC, E2000, 5 pack | عدد | 142 | 0 | |
| مواد | Quick Clean Cleaner 1.25 mm Fiber, LC and MU, 5 pack | 5 | Quick Clean Cleaner 1.25 mm Fiber, LC and MU, 5 pack | Quick Clean Cleaner 1.25 mm Fiber, LC and MU, 5 pack | عدد | 143 | 0 | |
| مواد | Printer ribbon for use with TDP4NIC approved manufacturerE heat shrink, self-laminating, Turn-Tell®, tan polyimide, and vinyl cloth labels comes in black hybrid. It is 300' (91.4 m) long and 4.25" (108 mm) wide. It comes in packages of 1. | 5 | Printer ribbon for use with TDP4NIC approved manufacturerE heat shrink, self-laminating, Turn-Tell®, tan polyimide, and vinyl cloth labels comes in black hybrid. It is 300' (91.4 m) long and 4.25" (108 mm) wide. It comes in packages of 1. | Printer ribbon for use with TDP4NIC approved manufacturerE heat shrink, self-laminating, Turn-Tell®, tan polyimide, and vinyl cloth labels comes in black hybrid. It is 300' (91.4 m) long and 4.25" (108 mm) wide. It comes in packages of 1. | عدد | 144 | 0 | |
| مواد | Printer ribbon for use with TDP4NIC approved manufacturerE heat shrink, self-laminating, Turn-Tell®, tan polyimide, and vinyl cloth labels comes in black hybrid. It is 300' (91.4 m) long and 2.5" (63.5 mm) wide. It comes in packages of 1. | 5 | Printer ribbon for use with TDP4NIC approved manufacturerE heat shrink, self-laminating, Turn-Tell®, tan polyimide, and vinyl cloth labels comes in black hybrid. It is 300' (91.4 m) long and 2.5" (63.5 mm) wide. It comes in packages of 1. | Printer ribbon for use with TDP4NIC approved manufacturerE heat shrink, self-laminating, Turn-Tell®, tan polyimide, and vinyl cloth labels comes in black hybrid. It is 300' (91.4 m) long and 2.5" (63.5 mm) wide. It comes in packages of 1. | عدد | 145 | 0 | |
| مواد | Printer cleaning kit for desktop printers contains (1) cleaning pen, (8) cleaning solution soaked wipes, (8) foam swabs pre-saturated with cleaning solution, MSDS, and cleaning instructions. It is designed for global usage. It comes in packages of 1. | 5 | Printer cleaning kit for desktop printers contains (1) cleaning pen, (8) cleaning solution soaked wipes, (8) foam swabs pre-saturated with cleaning solution, MSDS, and cleaning instructions. It is designed for global usage. It comes in packages of 1. | Printer cleaning kit for desktop printers contains (1) cleaning pen, (8) cleaning solution soaked wipes, (8) foam swabs pre-saturated with cleaning solution, MSDS, and cleaning instructions. It is designed for global usage. It comes in packages of 1. | عدد | 146 | 0 | |
| معدات | Prefab modules | 1 | Prefab modules | A. Prefab modules for datahall: supply, install and commissioning of ISO container，inlcluding the lighting and realted cables，decoration，cable tray with related support，rack containment, T&H sensor and cameras inside modules. B. Prefab modules for power area: supply, install and commissioning of ISO container，inlcluding the lighting and realted cables，decoration，cable tray with related support, T&H sensor and cameras, UPS and related power panels integration inside modules. C. Prefab modules for battery area: supply, install and commissioning of ISO container，inlcluding the lighting and realted cables，decoration，cable tray with related support T&H sensor and cameras, battery integration inside modules. The Contractor shall be responsible for the implementation and the configuration of a Data Center Infrastructure Management (DCIM) System for remote monitoring and control of various environmental elements within the data center | عدد | 147 | 0 | |
| مواد | Power Quality Logger with remote access facility, NIC approved manufacturer 1748 | 5 | Power Quality Logger with remote access facility, NIC approved manufacturer 1748 | Power Quality Logger with remote access facility, NIC approved manufacturer 1748 | عدد | 148 | 0 | |
| مواد | Power cable (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 1 | Power cable (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Supply, installation, testing and commissioning of cables including all necessary cable joints, cable connectors, cable glands, shrouds, fixing accessories of cables on cable ladders, termination kits, laying on cable ladders, etc. Service quotation should consider below points: 1. Uncovering the cable reel for inspection; 2. Cleaning; 3. Equipment supply and installation; 4. Cable tray arrangement and cable layout in tubes or ducts; 5. Middle connectors (including clip connectors), pre-branching cable connectors (suitable for pre-branching cables), and crimping terminals; 6. Holders and brackets laid along supports and bushings through floors; 7. Anti-corrosion paint, fireproof partition and sealing; 8. Testing and Labeling; 9. Installation and removal of auxiliary facilities for cable layout; 10. Electrical system commissioning 11. All indoor cables mut be LSZH. | عدد | 149 | 2094 | 1 |
| مواد | PlenaForm around 100 meter. (filler)-85 X 5 | 5 | PlenaForm around 100 meter. (filler)-85 X 5 | PlenaForm around 100 meter. (filler)-85 X 5 | عدد | 150 | 0 | |
| مواد | NIC approved manufacturer HEAVY DUTY PALLET TRUCK # 034527101 | 5 | NIC approved manufacturer HEAVY DUTY PALLET TRUCK # 034527101 | NIC approved manufacturer HEAVY DUTY PALLET TRUCK # 034527101 | عدد | 151 | 0 | |
| مواد | Perforated tile lifter. | 5 | Perforated tile lifter. | Perforated tile lifter. | عدد | 152 | 0 | |
| مواد | PDU brackets, sold in pairs. Color: Black | 5 | PDU brackets, sold in pairs. Color: Black | PDU brackets, sold in pairs. Color: Black | عدد | 153 | 0 | |
| مواد | NIC approved manufacturer locking tie, intermediate cross section, 9.7 (246mm) length, nylon 6.6, natural, standard package. 100 PCS | 5 | NIC approved manufacturer locking tie, intermediate cross section, 9.7 (246mm) length, nylon 6.6, natural, standard package. 100 PCS | NIC approved manufacturer locking tie, intermediate cross section, 9.7 (246mm) length, nylon 6.6, natural, standard package. 100 PCS | عدد | 154 | 0 | |
| مواد | NIC approved manufacturer Easy-Mark Plus Labeling Software | 5 | NIC approved manufacturer Easy-Mark Plus Labeling Software | NIC approved manufacturer Easy-Mark Plus Labeling Software | عدد | 155 | 0 | |
| مواد | NIC approved manufacturer Cable lugs Tube type 2.5mm/4mm/6mm | 5 | NIC approved manufacturer Cable lugs Tube type 2.5mm/4mm/6mm | NIC approved manufacturer Cable lugs Tube type 2.5mm/4mm/6mm | عدد | 156 | 0 | |
| مواد | Padlocks for Backup Tape Cases TL5020 11-675963 | 5 | Padlocks for Backup Tape Cases TL5020 11-675963 | Padlocks for Backup Tape Cases TL5020 11-675963 | عدد | 157 | 0 | |
| مواد | Outdoor PTZ Camera with All Accessories | 5 | Outdoor PTZ Camera with All Accessories | Outdoor PTZ Camera with All Accessories | عدد | 158 | 0 | |
| مواد | Outdoor Fixed camera with All Accessories | 5 | Outdoor Fixed camera with All Accessories | Outdoor Fixed camera with All Accessories | عدد | 159 | 0 | |
| مواد | Outdoor camera pole with all accessories | 5 | Outdoor camera pole with all accessories | Outdoor camera pole with all accessories | عدد | 160 | 0 | |
| مواد | OS1/OS2 1-fiber, 900μm buffered, patch cord, with no jacket, LC to pigtail, Std. IL. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OS1/OS2 1-fiber, 900μm buffered, patch cord, with no jacket, LC to pigtail, Std. IL. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OS1/OS2 1-fiber, 900μm buffered, patch cord, with no jacket, LC to pigtail, Std. IL. | عدد | 161 | 2114 | 1 |
| مواد | Optional power/automatic cutter for TDP4NIC approved manufacturerE thermal transfer desktop printer; easy to install for automatic cutting of labels. | 5 | Optional power/automatic cutter for TDP4NIC approved manufacturerE thermal transfer desktop printer; easy to install for automatic cutting of labels. | Optional power/automatic cutter for TDP4NIC approved manufacturerE thermal transfer desktop printer; easy to install for automatic cutting of labels. | عدد | 162 | 0 | |
| مواد | OptiFiber Pro Quad with Wi-Fi enabled Versiv2 Main + OTDR Quad module + FI-1000-KIT + Launch Fibers | 5 | OptiFiber Pro Quad with Wi-Fi enabled Versiv2 Main + OTDR Quad module + FI-1000-KIT + Launch Fibers | OptiFiber Pro Quad with Wi-Fi enabled Versiv2 Main + OTDR Quad module + FI-1000-KIT + Launch Fibers | عدد | 163 | 0 | |
| مواد | Opticom® QuickNet™ Rack Mount Fiber Enclosures, Holds up to four FAP adapter panels, or FOSM splice modules. | 5 | Opticom® QuickNet™ Rack Mount Fiber Enclosures, Holds up to four FAP adapter panels, or FOSM splice modules. | Opticom® QuickNet™ Rack Mount Fiber Enclosures, Holds up to four FAP adapter panels, or FOSM splice modules. | عدد | 164 | 0 | |
| مواد | Opticom® Fiber Optic Splice Module holds and protects up to 24 fusion splices within NIC approved manufacturer® Opticom® FCEU Rack Mount Fiber Enclosures | 5 | Opticom® Fiber Optic Splice Module holds and protects up to 24 fusion splices within NIC approved manufacturer® Opticom® FCEU Rack Mount Fiber Enclosures | Opticom® Fiber Optic Splice Module holds and protects up to 24 fusion splices within NIC approved manufacturer® Opticom® FCEU Rack Mount Fiber Enclosures | عدد | 165 | 0 | |
| مواد | One 120" length #6 AWG green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L.. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | One 120" length #6 AWG green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L.. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | One 120" length #6 AWG green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L.. | عدد | 166 | 2094 | 1 |
| مواد | NIC approved manufacturer TRANSPALLET TROLLEY 2.0 TON CAPACITY | 5 | NIC approved manufacturer TRANSPALLET TROLLEY 2.0 TON CAPACITY | NIC approved manufacturer TRANSPALLET TROLLEY 2.0 TON CAPACITY | عدد | 167 | 0 | |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye,15m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye,15m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye,15m | عدد | 168 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye,14m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye,14m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye,14m | عدد | 169 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye,10m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye,10m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye,10m | عدد | 170 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 9m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 9m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 9m | عدد | 171 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 8m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 8m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 8m | عدد | 172 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 3 meters. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 3 meters. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 3 meters. | عدد | 173 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 2 meters. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 2 meters. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 2 meters. | عدد | 174 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 2 Feets (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 2 Feets (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 2 Feets | عدد | 175 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 16m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 16m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 16m | عدد | 176 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 1NIC approved manufacturer (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 1NIC approved manufacturer (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 1NIC approved manufacturer | عدد | 177 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 12m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 12m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 12m | عدد | 178 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 11m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 11m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 11m | عدد | 179 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 1 meters. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 1 meters. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 1 meters. | عدد | 180 | 2114 | 1 |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 1 Feet (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 1 Feet (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 1 Feet | عدد | 181 | 2114 | 1 |
| مواد | NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTTi20 NM TORQUE WRENCH #NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturer13649 | 5 | NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTTi20 NM TORQUE WRENCH #NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturer13649 | NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTTi20 NM TORQUE WRENCH #NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturer13649 | عدد | 182 | 0 | |
| مواد | NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTORQUE 20-100 NM NORBAR-130103 NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTORQUE WRENCH | 5 | NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTORQUE 20-100 NM NORBAR-130103 NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTORQUE WRENCH | NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTORQUE 20-100 NM NORBAR-130103 NIC approved manufacturerTORQUE WRENCH NIC approved manufacturerTTi20NIC approved manufacturerTORQUE WRENCH | عدد | 183 | 0 | |
| مواد | NIC approved manufacturer IVT 1000CR w/Safe-Pak. | 5 | NIC approved manufacturer IVT 1000CR w/Safe-Pak. | NIC approved manufacturer IVT 1000CR w/Safe-Pak. | عدد | 184 | 0 | |
| مواد | NIC approved manufacturer219022 Combination plier | 5 | NIC approved manufacturer219022 Combination plier | NIC approved manufacturer219022 Combination plier | عدد | 185 | 0 | |
| مواد | NIC approved manufacturer, DIAGONAL CUTTER HD 6" | 5 | NIC approved manufacturer, DIAGONAL CUTTER HD 6" | NIC approved manufacturer, DIAGONAL CUTTER HD 6" | عدد | 186 | 0 | |
| مواد | NIC approved manufacturer 8" Long nose plier | 5 | NIC approved manufacturer 8" Long nose plier | NIC approved manufacturer 8" Long nose plier | عدد | 187 | 0 | |
| مواد | NIC approved manufacturer 219025NB Diagonal plier | 5 | NIC approved manufacturer 219025NB Diagonal plier | NIC approved manufacturer 219025NB Diagonal plier | عدد | 188 | 0 | |
| مواد | Network Video recorder with All Accessories | 5 | Network Video recorder with All Accessories | Network Video recorder with All Accessories | عدد | 189 | 0 | |
| مواد | NetBotz Wireless USB Coordinator & Router | 5 | NetBotz Wireless USB Coordinator & Router | NetBotz Wireless USB Coordinator & Router | عدد | 190 | 0 | |
| مواد | NetBotz Wireless Temperature Sensor | 5 | NetBotz Wireless Temperature Sensor | NetBotz Wireless Temperature Sensor | عدد | 191 | 0 | |
| مواد | NetBotz Wireless Temperature & Humidity Sensor | 5 | NetBotz Wireless Temperature & Humidity Sensor | NetBotz Wireless Temperature & Humidity Sensor | عدد | 192 | 0 | |
| مواد | NetBotz Wireless Sensor Pod 180 | 5 | NetBotz Wireless Sensor Pod 180 | NetBotz Wireless Sensor Pod 180 | عدد | 193 | 0 | |
| مواد | NetBotz Vibration Sensor - 12 ft. | 5 | NetBotz Vibration Sensor - 12 ft. | NetBotz Vibration Sensor - 12 ft. | عدد | 194 | 0 | |
| مواد | NetBotz Smoke Sensor - 10 ft. | 5 | NetBotz Smoke Sensor - 10 ft. | NetBotz Smoke Sensor - 10 ft. | عدد | 195 | 0 | |
| مواد | NetBotz Rack Monitor 750 | 5 | NetBotz Rack Monitor 750 | NetBotz Rack Monitor 750 | عدد | 196 | 0 | |
| مواد | NetBotz Rack Monitor 250 | 5 | NetBotz Rack Monitor 250 | NetBotz Rack Monitor 250 | عدد | 197 | 0 | |
| مواد | NetBotz Leak Rope Sensor - 20 ft. | 5 | NetBotz Leak Rope Sensor - 20 ft. | NetBotz Leak Rope Sensor - 20 ft. | عدد | 198 | 0 | |
| مواد | NetBotz Leak Rope Extension - 20 ft. | 5 | NetBotz Leak Rope Extension - 20 ft. | NetBotz Leak Rope Extension - 20 ft. | عدد | 199 | 0 | |
| مواد | Netbotz Configuration Service in ISX Designer 1 | 5 | Netbotz Configuration Service in ISX Designer 1 | Netbotz Configuration Service in ISX Designer 1 | عدد | 200 | 0 | |
| مواد | NetBotz Assembly Service, configuration, testing and commissioning per device | 5 | NetBotz Assembly Service, configuration, testing and commissioning per device | NetBotz Assembly Service, configuration, testing and commissioning per device | عدد | 201 | 0 | |
| مواد | NetBotz Assembly Service for up to 3 Appliances and Associated Accessories for 7-Series - 2-Series | 5 | NetBotz Assembly Service for up to 3 Appliances and Associated Accessories for 7-Series - 2-Series | NetBotz Assembly Service for up to 3 Appliances and Associated Accessories for 7-Series - 2-Series | عدد | 202 | 0 | |
| مواد | Net-Access™ N-Type Cabinet frame with top panel. Cage nut rails. Single perforated front door. Split perforated rear doors open in the middle to minimize door swing footprint. Solid side panels (2). Two sets of cage nut equipment mounting rails. 42 RU cable management on front and rear of front posts. Dimensions: 78.8in H x 31.5in W x 48.0in D (2000mm x 800mm x 1200mm)..Color: Black, Two sets of SN25F fingers Included. | 5 | Net-Access™ N-Type Cabinet frame with top panel. Cage nut rails. Single perforated front door. Split perforated rear doors open in the middle to minimize door swing footprint. Solid side panels (2). Two sets of cage nut equipment mounting rails. 42 RU cable management on front and rear of front posts. Dimensions: 78.8in H x 31.5in W x 48.0in D (2000mm x 800mm x 1200mm)..Color: Black, Two sets of SN25F fingers Included. | Net-Access™ N-Type Cabinet frame with top panel. Cage nut rails. Single perforated front door. Split perforated rear doors open in the middle to minimize door swing footprint. Solid side panels (2). Two sets of cage nut equipment mounting rails. 42 RU cable management on front and rear of front posts. Dimensions: 78.8in H x 31.5in W x 48.0in D (2000mm x 800mm x 1200mm)..Color: Black, Two sets of SN25F fingers Included. | عدد | 203 | 0 | |
| مواد | Multimode Launch Cable, 50 µm, SC/LC | 5 | Multimode Launch Cable, 50 µm, SC/LC | Multimode Launch Cable, 50 µm, SC/LC | عدد | 204 | 0 | |
| مواد | Multi-Meter, NIC approved manufacturer 289/ir3000 FC Kit with Soft Carrying Case | 5 | Multi-Meter, NIC approved manufacturer 289/ir3000 FC Kit with Soft Carrying Case | Multi-Meter, NIC approved manufacturer 289/ir3000 FC Kit with Soft Carrying Case | عدد | 205 | 0 | |
| مواد | Multifunction calibrator, NIC approved manufacturer 754 | 5 | Multifunction calibrator, NIC approved manufacturer 754 | Multifunction calibrator, NIC approved manufacturer 754 | عدد | 206 | 0 | |
| مواد | MultiFiber Pro Base Kit, MPO Power Meter Laser Source (PMLS), Test Reference Cord & MPO QuickClean Cleaner | 5 | MultiFiber Pro Base Kit, MPO Power Meter Laser Source (PMLS), Test Reference Cord & MPO QuickClean Cleaner | MultiFiber Pro Base Kit, MPO Power Meter Laser Source (PMLS), Test Reference Cord & MPO QuickClean Cleaner | عدد | 207 | 0 | |
| مواد | MSPO PDU, 32A , (38)C13, (6)C19, IEC60309, 1P+N+E, 6H, IP44-1M, TOP FED, BLUE, | 5 | MSPO PDU, 32A , (38)C13, (6)C19, IEC60309, 1P+N+E, 6H, IP44-1M, TOP FED, BLUE, | MSPO PDU, 32A , (38)C13, (6)C19, IEC60309, 1P+N+E, 6H, IP44-1M, TOP FED, BLUE, | عدد | 208 | 0 | |
| مواد | MSPO PDU, 32A , (24)C13, (12)C19, IEC60309 3P+N+E, 6H, IP44-1M, TOP FED, YELLOW, NCNR | 5 | MSPO PDU, 32A , (24)C13, (12)C19, IEC60309 3P+N+E, 6H, IP44-1M, TOP FED, YELLOW, NCNR | MSPO PDU, 32A , (24)C13, (12)C19, IEC60309 3P+N+E, 6H, IP44-1M, TOP FED, YELLOW, NCNR | عدد | 209 | 0 | |
| مواد | MSPO PDU, 32A (38)C13, (6)C19, IEC60309, 1P+N+E, 6H, IP44-1M, TOP FED, YELLOW, NCNR , | 5 | MSPO PDU, 32A (38)C13, (6)C19, IEC60309, 1P+N+E, 6H, IP44-1M, TOP FED, YELLOW, NCNR , | MSPO PDU, 32A (38)C13, (6)C19, IEC60309, 1P+N+E, 6H, IP44-1M, TOP FED, YELLOW, NCNR , | عدد | 210 | 0 | |
| مواد | MSPO PDU, 32A (24)C13, (12)C19, IEC60309 3P+N+E, 6H, IP44-1M, TOP FED, BLUE, NCNR | 5 | MSPO PDU, 32A (24)C13, (12)C19, IEC60309 3P+N+E, 6H, IP44-1M, TOP FED, BLUE, NCNR | MSPO PDU, 32A (24)C13, (12)C19, IEC60309 3P+N+E, 6H, IP44-1M, TOP FED, BLUE, NCNR | عدد | 211 | 0 | |
| مواد | Motor Drive Analyzer, NIC approved manufacturer MDA-550 | 5 | Motor Drive Analyzer, NIC approved manufacturer MDA-550 | Motor Drive Analyzer, NIC approved manufacturer MDA-550 | عدد | 212 | 0 | |
| مواد | Monitor screen with All Accessories | 5 | Monitor screen with All Accessories | Monitor screen with All Accessories | عدد | 213 | 0 | |
| مواد | Mighty Lift ML55 Pallet Jack | 5 | Mighty Lift ML55 Pallet Jack | Mighty Lift ML55 Pallet Jack | عدد | 214 | 0 | |
| مواد | Mechanical, NIC approved manufacturer ii900 | 5 | Mechanical, NIC approved manufacturer ii900 | Mechanical, NIC approved manufacturer ii900 | عدد | 215 | 0 | |
| مواد | MASTER, PADLOCK LAMINATED STEEL 30 MM (CARDED) | 5 | MASTER, PADLOCK LAMINATED STEEL 30 MM (CARDED) | MASTER, PADLOCK LAMINATED STEEL 30 MM (CARDED) | عدد | 216 | 0 | |
| مواد | NIC approved manufacturer JIGSAW NIC approved manufacturer JIGSAW #4350FCT JIGSAW | 5 | NIC approved manufacturer JIGSAW NIC approved manufacturer JIGSAW #4350FCT JIGSAW | NIC approved manufacturer JIGSAW NIC approved manufacturer JIGSAW #4350FCT JIGSAW | عدد | 217 | 0 | |
| مواد | Magnetic Under Rack Panel - 26" | 5 | Magnetic Under Rack Panel - 26" | Magnetic Under Rack Panel - 26" | عدد | 218 | 0 | |
| مواد | Magnetic lock | 5 | Magnetic lock | Magnetic lock | عدد | 219 | 0 | |
| مواد | Machine for disposable shoes cover with consumables set | 5 | Machine for disposable shoes cover with consumables set | Machine for disposable shoes cover with consumables set | عدد | 220 | 0 | |
| معدات | LV BUSDUCT SYSTEM (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 1 | LV BUSDUCT SYSTEM (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Supply,Installation, testing and commissioning of LV Busduct System and fittings including bends and junctions, supports, fixings, fittings, and associated builders works as necessary, etc. Service quotation should consider below points: 1. Supply and installation of intensive copper busways; 2. Bus lap bars, tapering lap joints, elbows, support insulators, insulating cells, phase paint, fireproof sealing, and hot dip galvanized angle steel supports and hangers; 3. Installation of closed busways in incoming and outgoing distribution boxes; 4. Other items for the completion of this work, including but not limited to those described above, are included in the comprehensive unit price. | عدد | 221 | 2082 | 1 |
| مواد | NIC approved manufacturer W-3217-07 Step Ladder | 5 | NIC approved manufacturer W-3217-07 Step Ladder | NIC approved manufacturer W-3217-07 Step Ladder | عدد | 222 | 0 | |
| مواد | LM-120 Light Meter | 5 | LM-120 Light Meter | LM-120 Light Meter | عدد | 223 | 0 | |
| مواد | Link150 Ethernet Gateway with POE | 5 | Link150 Ethernet Gateway with POE | Link150 Ethernet Gateway with POE | عدد | 224 | 0 | |
| مواد | Link150 Ethernet gateway | 5 | Link150 Ethernet gateway | Link150 Ethernet gateway | عدد | 225 | 0 | |
| معدات | Lighting, Sockets, Earthing, Lightning Protection, Emergency lighting (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 1 | Lighting, Sockets, Earthing, Lightning Protection, Emergency lighting (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | A. Supply, installation, testing and commissioning of intelligent Lighting Fixtures including conduits, fittings, wires, draw wires, trunkings, supports, all necessary accessories, etc. and the small power system including outlets, isolators, instrumentations, metering, interconnections, spare parts and tools. Complete as specified and refer electrical SLD for more details. Wiring in single core insulated cables, drawing into and including conduit/trunking where required, complete with boxes, fittings and supporting brackets. Lighting points (price to include supply and installation of switch button, cable, conduits and supporting system) Light fixture for Installation in building office, Transformer rooms, Power room, MV Room . Outside building Etc Wiring in single core insulated cables, drawing into and including conduit/trunking where required, complete with boxes, fittings and supporting brackets. Lighting points (price to include supply and installation of cable, conduits and supporting system) Light fixture for Indoor Installation in Pump rooms, Transformer rooms and other external rooms other than Prefab B. Supply and installation of a grounding system comprising bare copper conductor to bond the building's electrical distribution boards, switchgear, transformers, generators and HVAC equipment to the main earthing grid of the building. C. Supply, installation, testing and commissioning for lightning protection as per BSEN62305 Part 1-4 which shall include necessary vertical and down conductor holders , Test Links , Copper Tapes, fixing accessories for supporting the Vertical Air Terminals as recommended by manufacturer. Adequate Air Terminals shall be included as part of scope. All material has to be supplied & installed from the same manufacturer with Third party inspection report for complete installation verification report document. D. Supply, Installation, testing and commissioning of Emergency Lighting System associated builders works as necessary, etc. Product should comply with local fire department requirements. Price should consider power and control wires provision and installation. | عدد | 226 | 2087 | 1 |
| مواد | LC OS1/OS2 FAP loaded with six LC duplex singlemode fiber optic adapters (Blue) with zirconia ceramic split sleeves. | 5 | LC OS1/OS2 FAP loaded with six LC duplex singlemode fiber optic adapters (Blue) with zirconia ceramic split sleeves. | LC OS1/OS2 FAP loaded with six LC duplex singlemode fiber optic adapters (Blue) with zirconia ceramic split sleeves. | عدد | 227 | 0 | |
| مواد | Laser/ink jet network label, 3.79" W x 0.30" H, 6-port identifier, adhesive polyolefin, white, 2 label/row, 50 labels/sheet, 1000 labels per package. | 5 | Laser/ink jet network label, 3.79" W x 0.30" H, 6-port identifier, adhesive polyolefin, white, 2 label/row, 50 labels/sheet, 1000 labels per package. | Laser/ink jet network label, 3.79" W x 0.30" H, 6-port identifier, adhesive polyolefin, white, 2 label/row, 50 labels/sheet, 1000 labels per package. | عدد | 228 | 0 | |
| مواد | Laser/ink jet component label, 2.00" W x 1.00" H, adhesive polyester, white, 4 labels/row, 28 labels/sheet, 1000 labels/package | 5 | Laser/ink jet component label, 2.00" W x 1.00" H, adhesive polyester, white, 4 labels/row, 28 labels/sheet, 1000 labels/package | Laser/ink jet component label, 2.00" W x 1.00" H, adhesive polyester, white, 4 labels/row, 28 labels/sheet, 1000 labels/package | عدد | 229 | 0 | |
| مواد | Laser/ink jet component label, 1.00" W x 0.50" H, adhesive polyester, white, 7 labels/row, 119 labels/sheet, 10,000 labels/package | 5 | Laser/ink jet component label, 1.00" W x 0.50" H, adhesive polyester, white, 7 labels/row, 119 labels/sheet, 10,000 labels/package | Laser/ink jet component label, 1.00" W x 0.50" H, adhesive polyester, white, 7 labels/row, 119 labels/sheet, 10,000 labels/package | عدد | 230 | 0 | |
| مواد | LAN/WAN Installers kit | 5 | LAN/WAN Installers kit | LAN/WAN Installers kit | عدد | 231 | 0 | |
| مواد | KRS Rj45 crimping tool | 5 | KRS Rj45 crimping tool | KRS Rj45 crimping tool | عدد | 232 | 0 | |
| مواد | NIC approved manufacturer Surface Mount, For installation in active raised floor data centers to seal cable openings without affecting operations | 5 | NIC approved manufacturer Surface Mount, For installation in active raised floor data centers to seal cable openings without affecting operations | NIC approved manufacturer Surface Mount, For installation in active raised floor data centers to seal cable openings without affecting operations | عدد | 233 | 0 | |
| مواد | NIC approved manufacturer-DIAGONAL CUTTER BLACK 160 MM | 5 | NIC approved manufacturer-DIAGONAL CUTTER BLACK 160 MM | NIC approved manufacturer-DIAGONAL CUTTER BLACK 160 MM | عدد | 234 | 0 | |
| مواد | NIC approved manufacturer-CONCRETORS NIPPERS 200 MM MADE IN GERMANY | 5 | NIC approved manufacturer-CONCRETORS NIPPERS 200 MM MADE IN GERMANY | NIC approved manufacturer-CONCRETORS NIPPERS 200 MM MADE IN GERMANY | عدد | 235 | 0 | |
| مواد | NIC approved manufacturer CUTTER WIRE CUTTER #7201140 | 5 | NIC approved manufacturer CUTTER WIRE CUTTER #7201140 | NIC approved manufacturer CUTTER WIRE CUTTER #7201140 | عدد | 236 | 0 | |
| مواد | NIC approved manufacturer, CRIMPING TOOL | 5 | NIC approved manufacturer, CRIMPING TOOL | NIC approved manufacturer, CRIMPING TOOL | عدد | 237 | 0 | |
| مواد | NIC approved manufacturer HL110 Foldable Trolley | 5 | NIC approved manufacturer HL110 Foldable Trolley | NIC approved manufacturer HL110 Foldable Trolley | عدد | 238 | 0 | |
| مواد | NIC approved manufacturerN NO.18.0MM HEAVY DUTY KNIFE WITH SNAF OFF | 5 | NIC approved manufacturerN NO.18.0MM HEAVY DUTY KNIFE WITH SNAF OFF | NIC approved manufacturer NO.18.0MM HEAVY DUTY KNIFE WITH SNAF OFF | عدد | 239 | 0 | |
| مواد | IR Window | 5 | IR Window | IR Window | عدد | 240 | 0 | |
| مواد | Indoor Fixed camera with All Accessories | 5 | Indoor Fixed camera with All Accessories | Indoor Fixed camera with All Accessories | عدد | 241 | 0 | |
| معدات | ICT Cabinet, 42U with RPDU support 22KW/rack | 1 | ICT Cabinet, 42U with RPDU support 22KW/rack | IT cabinet,with side panel, blank panel,bottom plate,cable rack ,cable ring,equipment slide，with RPDU support 22KW. Dimension 800mm(W)*1200mm(D)*2200mm(H) | عدد | 242 | 0 | |
| مواد | NIC approved manufacturer Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable QK734A (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable QK734A (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable QK734A | عدد | 243 | 2114 | 1 |
| مواد | NIC approved manufacturer Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable QK735A (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable QK735A (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable QK735A | عدد | 244 | 2114 | 1 |
| مواد | NIC approved manufacturer JACK HAMMER NIC approved manufacturer DRILL #BREAKER TE 500 230V | 5 | NIC approved manufacturer JACK HAMMER NIC approved manufacturer DRILL #BREAKER TE 500 230V | NIC approved manufacturer JACK HAMMER NIC approved manufacturer DRILL #BREAKER TE 500 230V | عدد | 245 | 0 | |
| مواد | NIC approved manufacturer CORDLESS NIC approved manufacturer DRILL #SFC 22-A BOX#2072955 | 5 | NIC approved manufacturer CORDLESS NIC approved manufacturer DRILL #SFC 22-A BOX#2072955 | NIC approved manufacturer CORDLESS NIC approved manufacturer DRILL #SFC 22-A BOX#2072955 | عدد | 246 | 0 | |
| مواد | High Temperature Ring Terminal, 12 – 10 AWG, 1/4" stud size, non-insulated, standard package. | 5 | High Temperature Ring Terminal, 12 – 10 AWG, 1/4" stud size, non-insulated, standard package. | High Temperature Ring Terminal, 12 – 10 AWG, 1/4" stud size, non-insulated, standard package. | عدد | 247 | 0 | |
| مواد | High Quality Computer Room Crash Cart | 5 | High Quality Computer Room Crash Cart | High Quality Computer Room Crash Cart | عدد | 248 | 0 | |
| مواد | HD Flex™ Enclosure Trunk Slack Plate - 4 RU. | 5 | HD Flex™ Enclosure Trunk Slack Plate - 4 RU. | HD Flex™ Enclosure Trunk Slack Plate - 4 RU. | عدد | 249 | 0 | |
| مواد | HD Flex™ Enclosure Trunk Slack Plate - 1 RU. | 5 | HD Flex™ Enclosure Trunk Slack Plate - 1 RU. | HD Flex™ Enclosure Trunk Slack Plate - 1 RU. | عدد | 250 | 0 | |
| مواد | HD Flex 4U 48 Cassette | 5 | HD Flex 4U 48 Cassette | HD Flex 4U 48 Cassette | عدد | 251 | 0 | |
| مواد | HD Flex 1U 12 Cassette | 5 | HD Flex 1U 12 Cassette | HD Flex 1U 12 Cassette | عدد | 252 | 0 | |
| مواد | HAND PALLET TRUCK 150KG FOLDABLE TYPE | 5 | HAND PALLET TRUCK 150KG FOLDABLE TYPE | HAND PALLET TRUCK 150KG FOLDABLE TYPE | عدد | 253 | 0 | |
| مواد | Grounding strip; 73.40" (1.9m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, one grounding sticker, three cage nut bonding studs, eight #12-24 bonding nuts and three strip clips. | 5 | Grounding strip; 73.40" (1.9m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, one grounding sticker, three cage nut bonding studs, eight #12-24 bonding nuts and three strip clips. | Grounding strip; 73.40" (1.9m) length; .67" (17mm) width; .03" (.76mm) thickness; provided with .16 oz. (5cc) of antioxidant, one grounding sticker, three cage nut bonding studs, eight #12-24 bonding nuts and three strip clips. | عدد | 254 | 0 | |
| مواد | NIC approved manufacturer CRIMPING MACHINE HYDROULIC CRIMP TOOL #HK1240 | 5 | NIC approved manufacturer CRIMPING MACHINE HYDROULIC CRIMP TOOL #HK1240 | NIC approved manufacturer CRIMPING MACHINE HYDROULIC CRIMP TOOL #HK1240 | عدد | 255 | 0 | |
| مواد | NIC approved manufacturer XL® GS8E Stranded Low Smoke Zero Halogen Cordage Modular Patch Cord, Dark Gray Jacket (Length: 5 meters) CPC3392-03 | GS8E-L-DG (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer XL® GS8E Stranded Low Smoke Zero Halogen Cordage Modular Patch Cord, Dark Gray Jacket (Length: 5 meters) CPC3392-03 | GS8E-L-DG (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer XL® GS8E Stranded Low Smoke Zero Halogen Cordage Modular Patch Cord, Dark Gray Jacket (Length: 5 meters) CPC3392-03 | GS8E-L-DG | عدد | 256 | 2094 | 1 |
| مواد | NIC approved manufacturer XL® GS8E Stranded Low Smoke Zero Halogen Cordage Modular Patch Cord, Dark Gray Jacket (Length: 20 meters) CPC3392-03 | GS8E-L-DG (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer XL® GS8E Stranded Low Smoke Zero Halogen Cordage Modular Patch Cord, Dark Gray Jacket (Length: 20 meters) CPC3392-03 | GS8E-L-DG (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer XL® GS8E Stranded Low Smoke Zero Halogen Cordage Modular Patch Cord, Dark Gray Jacket (Length: 20 meters) CPC3392-03 | GS8E-L-DG | عدد | 257 | 2094 | 1 |
| مواد | G5 2 PIECE MAG SENSOR MOUNTING BRACKET REAR DOOR | 5 | G5 2 PIECE MAG SENSOR MOUNTING BRACKET REAR DOOR | G5 2 PIECE MAG SENSOR MOUNTING BRACKET REAR DOOR | عدد | 258 | 0 | |
| مواد | G5 2 PIECE MAG SENSOR MOUNTING BRACKET FRONT DOOR | 5 | G5 2 PIECE MAG SENSOR MOUNTING BRACKET FRONT DOOR | G5 2 PIECE MAG SENSOR MOUNTING BRACKET FRONT DOOR | عدد | 259 | 0 | |
| مواد | Front to Back Cable Management Bracket, 800mm W Cabinets. | 5 | Front to Back Cable Management Bracket, 800mm W Cabinets. | Front to Back Cable Management Bracket, 800mm W Cabinets. | عدد | 260 | 0 | |
| مواد | NIC approved manufacturer FMT-039 Socket and Spanner tool set | 5 | NIC approved manufacturer FMT-039 Socket and Spanner tool set | NIC approved manufacturer FMT-039 Socket and Spanner tool set | عدد | 261 | 0 | |
| مواد | NIC approved manufacturer T6-1000 pro Electrical Tester | 5 | NIC approved manufacturer T6-1000 pro Electrical Tester | NIC approved manufacturer T6-1000 pro Electrical Tester | عدد | 262 | 0 | |
| مواد | NIC approved manufacturer IKST7 Insulated Hand Tool Starter Kit & Roll Up Tool Pouch, 1000 V | 5 | NIC approved manufacturer IKST7 Insulated Hand Tool Starter Kit & Roll Up Tool Pouch, 1000 V | NIC approved manufacturer IKST7 Insulated Hand Tool Starter Kit & Roll Up Tool Pouch, 1000 V | عدد | 263 | 0 | |
| مواد | NIC approved manufacturer 922/kit Airflow Meter/Kit | 5 | NIC approved manufacturer 922/kit Airflow Meter/Kit | NIC approved manufacturer 922/kit Airflow Meter/Kit | عدد | 264 | 0 | |
| مواد | NIC approved manufacturer 830 laser Shaft Alignment Tool | 5 | NIC approved manufacturer 830 laser Shaft Alignment Tool | NIC approved manufacturer 830 laser Shaft Alignment Tool | عدد | 265 | 0 | |
| مواد | NIC approved manufacturer 810 Vibration Tester | 5 | NIC approved manufacturer 810 Vibration Tester | NIC approved manufacturer 810 Vibration Tester | عدد | 266 | 0 | |
| مواد | NIC approved manufacturer 805 FC Vibration Meter | 5 | NIC approved manufacturer 805 FC Vibration Meter | NIC approved manufacturer 805 FC Vibration Meter | عدد | 267 | 0 | |
| مواد | NIC approved manufacturer 773 with Soft Carrying case | 5 | NIC approved manufacturer 773 with Soft Carrying case | NIC approved manufacturer 773 with Soft Carrying case | عدد | 268 | 0 | |
| مواد | NIC approved manufacturer 572-2 High Temperature Infrared Thermometer | 5 | NIC approved manufacturer 572-2 High Temperature Infrared Thermometer | NIC approved manufacturer 572-2 High Temperature Infrared Thermometer | عدد | 269 | 0 | |
| مواد | NIC approved manufacturer 438 II Power Quality Analyzer & Motor Analyzer | 5 | NIC approved manufacturer 438 II Power Quality Analyzer & Motor Analyzer | NIC approved manufacturer 438 II Power Quality Analyzer & Motor Analyzer | عدد | 270 | 0 | |
| مواد | NIC approved manufacturer 368 FC Leakage Current Clamp Meter | 5 | NIC approved manufacturer 368 FC Leakage Current Clamp Meter | NIC approved manufacturer 368 FC Leakage Current Clamp Meter | عدد | 271 | 0 | |
| مواد | NIC approved manufacturer 365 Detachable Jaw True RMS AC/DC Clamp Meter | 5 | NIC approved manufacturer 365 Detachable Jaw True RMS AC/DC Clamp Meter | NIC approved manufacturer 365 Detachable Jaw True RMS AC/DC Clamp Meter | عدد | 272 | 0 | |
| مواد | NIC approved manufacturer 1LAC Contact Voltage Tester | 5 | NIC approved manufacturer 1LAC Contact Voltage Tester | NIC approved manufacturer 1LAC Contact Voltage Tester | عدد | 273 | 0 | |
| مواد | NIC approved manufacturer 1ACII Contact Voltage Tester | 5 | NIC approved manufacturer 1ACII Contact Voltage Tester | NIC approved manufacturer 1ACII Contact Voltage Tester | عدد | 274 | 0 | |
| مواد | NIC approved manufacturer 1630-2 FC Earth Ground Clamp with full accessories and case | 5 | NIC approved manufacturer 1630-2 FC Earth Ground Clamp with full accessories and case | NIC approved manufacturer 1630-2 FC Earth Ground Clamp with full accessories and case | عدد | 275 | 0 | |
| مواد | NIC approved manufacturer 1623 ME Earth Ground Tester Kit | 5 | NIC approved manufacturer 1623 ME Earth Ground Tester Kit | NIC approved manufacturer 1623 ME Earth Ground Tester Kit | عدد | 276 | 0 | |
| مواد | NIC approved manufacturer 1587 FC Insulation Multimeter | 5 | NIC approved manufacturer 1587 FC Insulation Multimeter | NIC approved manufacturer 1587 FC Insulation Multimeter | عدد | 277 | 0 | |
| مواد | Floor lifter 5” heavy duty and bracket kit. | 5 | Floor lifter 5” heavy duty and bracket kit. | Floor lifter 5” heavy duty and bracket kit. | عدد | 278 | 0 | |
| مواد | Finger Kit, 100mm (3.9) depth that attaches to posts on 42 RU through 48 RU cabinets. Color: Black | 5 | Finger Kit, 100mm (3.9) depth that attaches to posts on 42 RU through 48 RU cabinets. Color: Black | Finger Kit, 100mm (3.9) depth that attaches to posts on 42 RU through 48 RU cabinets. Color: Black | عدد | 279 | 0 | |
| مواد | Fiber optic splice module holder, 1 RU. Holds up to four FOSM splice modules. For use with FCE1U fiber enclosure. | 5 | Fiber optic splice module holder, 1 RU. Holds up to four FOSM splice modules. For use with FCE1U fiber enclosure. | Fiber optic splice module holder, 1 RU. Holds up to four FOSM splice modules. For use with FCE1U fiber enclosure. | عدد | 280 | 0 | |
| مواد | FI-3000 FiberInspector Ultra for Versiv (via USB connection) and iOS and Android devices (via Wi-Fi) | 5 | FI-3000 FiberInspector Ultra for Versiv (via USB connection) and iOS and Android devices (via Wi-Fi) | FI-3000 FiberInspector Ultra for Versiv (via USB connection) and iOS and Android devices (via Wi-Fi) | عدد | 281 | 0 | |
| مواد | NIC approved manufacturer 0715762745 Insulated Screw Drivers Set | 5 | NIC approved manufacturer 0715762745 Insulated Screw Drivers Set | NIC approved manufacturer 0715762745 Insulated Screw Drivers Set | عدد | 282 | 0 | |
| مواد | NIC approved manufacturer® - 19" 6RU Server Rack Blanking Panels, Blanking panels are an important part of good airflow management - they prevent hot-air recirculation and cold-air bypass. NIC approved manufacturer® are a green initiative that helps save on energy costs and reduce the carbon footprint of your data center. | 5 | NIC approved manufacturer® - 19" 6RU Server Rack Blanking Panels, Blanking panels are an important part of good airflow management - they prevent hot-air recirculation and cold-air bypass. NIC approved manufacturer® are a green initiative that helps save on energy costs and reduce the carbon footprint of your data center. | NIC approved manufacturer® - 19" 6RU Server Rack Blanking Panels, Blanking panels are an important part of good airflow management - they prevent hot-air recirculation and cold-air bypass. NIC approved manufacturer® are a green initiative that helps save on energy costs and reduce the carbon footprint of your data center. | عدد | 283 | 0 | |
| مواد | Environment, NIC approved manufacturer 971 | 5 | Environment, NIC approved manufacturer 971 | Environment, NIC approved manufacturer 971 | عدد | 284 | 0 | |
| مواد | Enhanced Fiber Optic Cleaning Kit with one-click cleaners | 5 | Enhanced Fiber Optic Cleaning Kit with one-click cleaners | Enhanced Fiber Optic Cleaning Kit with one-click cleaners | عدد | 285 | 0 | |
| مواد | End of row slack spool | 5 | End of row slack spool | End of row slack spool | عدد | 286 | 0 | |
| مواد | Emergency break glass button | 5 | Emergency break glass button | Emergency break glass button | عدد | 287 | 0 | |
| مواد | Electronic Torque Wrench with Rectangular Interchangeable Head | 5 | Electronic Torque Wrench with Rectangular Interchangeable Head | Electronic Torque Wrench with Rectangular Interchangeable Head | عدد | 288 | 0 | |
| مواد | Electrical tester, NIC approved manufacturer 9040 | 5 | Electrical tester, NIC approved manufacturer 9040 | Electrical tester, NIC approved manufacturer 9040 | عدد | 289 | 0 | |
| مواد | Dymo Labeling Tape XTL Laminated Wire/Cable Wrap (XTL 1868708) | 5 | Dymo Labeling Tape XTL Laminated Wire/Cable Wrap (XTL 1868708) | Dymo Labeling Tape XTL Laminated Wire/Cable Wrap (XTL 1868708) | عدد | 290 | 0 | |
| مواد | Dymo Labeling Tape XTL All Purpose Vinyl (XTL 1868755) | 5 | Dymo Labeling Tape XTL All Purpose Vinyl (XTL 1868755) | Dymo Labeling Tape XTL All Purpose Vinyl (XTL 1868755) | عدد | 291 | 0 | |
| مواد | Dual Locking Power Cord, IEC C20 to IEC C19 - 6 feet (1.8 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C20 to IEC C19 - 6 feet (1.8 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C20 to IEC C19 - 6 feet (1.8 meters), 10 Pack, Yellow. | عدد | 292 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C20 to IEC C19 - 6 feet (1.8 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C20 to IEC C19 - 6 feet (1.8 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C20 to IEC C19 - 6 feet (1.8 meters), 10 Pack, Blue. | عدد | 293 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C20 to IEC C19 - 4 feet (1.2 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C20 to IEC C19 - 4 feet (1.2 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C20 to IEC C19 - 4 feet (1.2 meters), 10 Pack, Yellow. | عدد | 294 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C20 to IEC C19 - 4 feet (1.2 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C20 to IEC C19 - 4 feet (1.2 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C20 to IEC C19 - 4 feet (1.2 meters), 10 Pack, Blue. | عدد | 295 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C20 to IEC C19 - 2 feet (0.6 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C20 to IEC C19 - 2 feet (0.6 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C20 to IEC C19 - 2 feet (0.6 meters), 10 Pack, Yellow. | عدد | 296 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C20 to IEC C19 - 2 feet (0.6 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C20 to IEC C19 - 2 feet (0.6 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C20 to IEC C19 - 2 feet (0.6 meters), 10 Pack, Blue. | عدد | 297 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C14 to IEC C13 - 6 feet (1.8 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C14 to IEC C13 - 6 feet (1.8 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C14 to IEC C13 - 6 feet (1.8 meters), 10 Pack, Yellow. | عدد | 298 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C14 to IEC C13 - 6 feet (1.8 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C14 to IEC C13 - 6 feet (1.8 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C14 to IEC C13 - 6 feet (1.8 meters), 10 Pack, Blue. | عدد | 299 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C14 to IEC C13 - 4 feet (1.2 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C14 to IEC C13 - 4 feet (1.2 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C14 to IEC C13 - 4 feet (1.2 meters), 10 Pack, Yellow. | عدد | 300 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C14 to IEC C13 - 4 feet (1.2 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C14 to IEC C13 - 4 feet (1.2 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C14 to IEC C13 - 4 feet (1.2 meters), 10 Pack, Blue. | عدد | 301 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C14 to IEC C13 - 2 feet (0.6 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C14 to IEC C13 - 2 feet (0.6 meters), 10 Pack, Yellow. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C14 to IEC C13 - 2 feet (0.6 meters), 10 Pack, Yellow. | عدد | 302 | 2094 | 1 |
| مواد | Dual Locking Power Cord, IEC C14 to IEC C13 - 2 feet (0.6 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Dual Locking Power Cord, IEC C14 to IEC C13 - 2 feet (0.6 meters), 10 Pack, Blue. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Dual Locking Power Cord, IEC C14 to IEC C13 - 2 feet (0.6 meters), 10 Pack, Blue. | عدد | 303 | 2094 | 1 |
| مواد | NIC approved manufacturer Expert35574 Crimping tool 1.5 to 10mm | 5 | NIC approved manufacturer Expert35574 Crimping tool 1.5 to 10mm | NIC approved manufacturer Expert35574 Crimping tool 1.5 to 10mm | عدد | 304 | 0 | |
| مواد | Door contact | 5 | Door contact | Door contact | عدد | 305 | 0 | |
| مواد | Disposable Shoes Cover (100Pcs) | 5 | Disposable Shoes Cover (100Pcs) | Disposable Shoes Cover (100Pcs) | عدد | 306 | 0 | |
| مواد | Disposable Coveralls | 5 | Disposable Coveralls | Disposable Coveralls | عدد | 307 | 0 | |
| مواد | NIC approved manufacturer. 18V MAX 1NIC approved manufacturerM DRILL DRIVER - 220V THREE YEARS WARRANTY | 5 | NIC approved manufacturer. 18V MAX 1NIC approved manufacturerM DRILL DRIVER - 220V THREE YEARS WARRANTY | NIC approved manufacturer. 18V MAX 1NIC approved manufacturerM DRILL DRIVER - 220V THREE YEARS WARRANTY | عدد | 308 | 0 | |
| مواد | NIC approved manufacturer,18V COMPACT HAMMER DRILL DRIVER - 220V THREE YEARS WARRANTY | 5 | NIC approved manufacturer,18V COMPACT HAMMER DRILL DRIVER - 220V THREE YEARS WARRANTY | NIC approved manufacturer,18V COMPACT HAMMER DRILL DRIVER - 220V THREE YEARS WARRANTY | عدد | 309 | 0 | |
| مواد | NIC approved manufacturer, COMPACT CIRCULAR SAW 184MM DOC 65MM 220V THREE YEARS WARRANTY | 5 | NIC approved manufacturer, COMPACT CIRCULAR SAW 184MM DOC 65MM 220V THREE YEARS WARRANTY | NIC approved manufacturer, COMPACT CIRCULAR SAW 184MM DOC 65MM 220V THREE YEARS WARRANTY | عدد | 310 | 0 | |
| مواد | NIC approved manufacturer, 500W PORTABLE JIGSAW 220 VOLT (5035046427880) THREE YEARS WARRANTY | 5 | NIC approved manufacturer, 500W PORTABLE JIGSAW 220 VOLT (5035046427880) THREE YEARS WARRANTY | NIC approved manufacturer, 500W PORTABLE JIGSAW 220 VOLT (5035046427880) THREE YEARS WARRANTY | عدد | 311 | 0 | |
| مواد | NIC approved manufacturer, 5 KG SDS MAX CHISELLING HAMMER - 220V THREE YEARS WARRANTY | 5 | NIC approved manufacturer, 5 KG SDS MAX CHISELLING HAMMER - 220V THREE YEARS WARRANTY | NIC approved manufacturer, 5 KG SDS MAX CHISELLING HAMMER - 220V THREE YEARS WARRANTY | عدد | 312 | 0 | |
| مواد | NIC approved manufacturer, 180MM VARIABLE SPEED POLISHER - 220V | 5 | NIC approved manufacturer, 180MM VARIABLE SPEED POLISHER - 220V | NIC approved manufacturer, 180MM VARIABLE SPEED POLISHER - 220V | عدد | 313 | 0 | |
| مواد | NIC approved manufacturer Tool Box Three drawer parts tool box | 5 | NIC approved manufacturer Tool Box Three drawer parts tool box | NIC approved manufacturer Tool Box Three drawer parts tool box | عدد | 314 | 0 | |
| مواد | Combination Floor Puller, Perf Tile Lifter, and Mounting Bracket | 5 | Combination Floor Puller, Perf Tile Lifter, and Mounting Bracket | Combination Floor Puller, Perf Tile Lifter, and Mounting Bracket | عدد | 315 | 0 | |
| مواد | FL-PL Perforated Tile lifter | 5 | FL-PL Perforated Tile lifter | FL-PL Perforated Tile lifter | عدد | 316 | 0 | |
| مواد | FL-5 Floor puller | 5 | FL-5 Floor puller | FL-5 Floor puller | عدد | 317 | 0 | |
| مواد | Data Center Management Software Configuration Suite | 5 | Data Center Management Software Configuration Suite | Data Center Management Software Configuration Suite | عدد | 318 | 0 | |
| مواد | Data Center Expert Perpetual License for 25 nodes | 5 | Data Center Expert Perpetual License for 25 nodes | Data Center Expert Perpetual License for 25 nodes | عدد | 319 | 0 | |
| مواد | Data Center Expert Basic Appliance | 5 | Data Center Expert Basic Appliance | Data Center Expert Basic Appliance | عدد | 320 | 0 | |
| مواد | Data Center Cleaning accessories, MATs box include 480 sheet (240 X 2) | 5 | Data Center Cleaning accessories, MATs box include 480 sheet (240 X 2) | Data Center Cleaning accessories, MATs box include 480 sheet (240 X 2) | عدد | 321 | 0 | |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging,9m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging,9m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging,9m | عدد | 322 | 2094 | 1 |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging,11m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging,11m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging,11m | عدد | 323 | 2094 | 1 |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging,10m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging,10m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging,10m | عدد | 324 | 2094 | 1 |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 8m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 8m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 8m | عدد | 325 | 2094 | 1 |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 7m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 7m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 7m | عدد | 326 | 2094 | 1 |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 16m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 16m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 16m | عدد | 327 | 2094 | 1 |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 15m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 15m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 15m | عدد | 328 | 2094 | 1 |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 14m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 14m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 14m | عدد | 329 | 2094 | 1 |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 1NIC approved manufacturer (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 1NIC approved manufacturer (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 1NIC approved manufacturer | عدد | 330 | 2094 | 1 |
| مواد | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 12m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 12m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Copper QuickNet Trunk Assy, Category 6A, UTP VariMatrix LSZH White Cable with Black Cassette to Black Cassette , Standard Packaging, 12m | عدد | 331 | 2094 | 1 |
| معدات | Cooling units for datahall Chilled water Type (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 1 | Cooling units for datahall Chilled water Type (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Main Performance of the Precision AC 1. The Precision AC consists of the chilled water coil, fan, electric two-way valve, controller, air filter, humidifier, and heater. 2. The Precision AC should be configured with high efficiency brushless EC fan, with stepless variable speed control mode, save energy than traditional AC fan. 3. The fan must be still running under the current speed while the control module failure; after the control module resumes work, the fan will be running under the actual environment again. 4. The RPM and power consumption (unit: kW) must be display in the control panel of the Precision AC. 5. The failure of the fan could be displayed in the control panel, includes: fan overvoltage, fan undervoltage, fan overcurrent, and etc. 6. Precision AC should be configured with easily cleanable & replaceable air filter (≥G4) with logging detector and alarm function. The air filter should be deployed on the heat exchanger for down flow unit instead of on the top of the unit, which will decrease the air pressure drop and easy for maintenance work. | عدد | 332 | 2070 | 1 |
| مواد | Communication , 2 GHz DSX2-8000 + CertiFiber OLTS Quad (Multimode and Singlemode ) Modules (2) + FI-1000-KIT Inspection Camera Kit | 5 | Communication , 2 GHz DSX2-8000 + CertiFiber OLTS Quad (Multimode and Singlemode ) Modules (2) + FI-1000-KIT Inspection Camera Kit | Communication , 2 GHz DSX2-8000 + CertiFiber OLTS Quad (Multimode and Singlemode ) Modules (2) + FI-1000-KIT Inspection Camera Kit | عدد | 333 | 0 | |
| مواد | Combination PDU/cable management bracket, 305mm (12") wide full length for 42 RU through 48 RU cabinet. | 5 | Combination PDU/cable management bracket, 305mm (12") wide full length for 42 RU through 48 RU cabinet. | Combination PDU/cable management bracket, 305mm (12") wide full length for 42 RU through 48 RU cabinet. | عدد | 334 | 0 | |
| مواد | Clear view floor panel ( 5X5) | 5 | Clear view floor panel ( 5X5) | Clear view floor panel ( 5X5) | عدد | 335 | 0 | |
| مواد | Clampmeters, NIC approved manufacturer 376 FC with Soft Carrying Case | 5 | Clampmeters, NIC approved manufacturer 376 FC with Soft Carrying Case | Clampmeters, NIC approved manufacturer 376 FC with Soft Carrying Case | عدد | 336 | 0 | |
| مواد | Center slack spool for between cabinets, adjustable 210mm (8.3") to 267mm (10.5") | 5 | Center slack spool for between cabinets, adjustable 210mm (8.3") to 267mm (10.5") | Center slack spool for between cabinets, adjustable 210mm (8.3") to 267mm (10.5") | عدد | 337 | 0 | |
| مواد | NIC approved manufacturer CRIMPING TOOL | 5 | NIC approved manufacturer CRIMPING TOOL | NIC approved manufacturer CRIMPING TOOL | عدد | 338 | 0 | |
| مواد | Caution Sign | 5 | Caution Sign | Caution Sign | عدد | 339 | 0 | |
| مواد | NIC approved manufacturer Safety Boots (Sizes 43) | 5 | NIC approved manufacturer Safety Boots (Sizes 43) | NIC approved manufacturer Safety Boots (Sizes 43) | عدد | 340 | 0 | |
| مواد | NIC approved manufacturer Hard Hat with Ear Protection | 5 | NIC approved manufacturer Hard Hat with Ear Protection | NIC approved manufacturer Hard Hat with Ear Protection | عدد | 341 | 0 | |
| مواد | NIC approved manufacturer Clas Ohlson Safety Glass | 5 | NIC approved manufacturer Clas Ohlson Safety Glass | NIC approved manufacturer Clas Ohlson Safety Glass | عدد | 342 | 0 | |
| مواد | NIC approved manufacturer CAT017406L Safety Gloves | 5 | NIC approved manufacturer CAT017406L Safety Gloves | NIC approved manufacturer CAT017406L Safety Gloves | عدد | 343 | 0 | |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, NIC approved manufacturer. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, NIC approved manufacturer. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, NIC approved manufacturer. | عدد | 344 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 2m. | عدد | 345 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 1m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 1m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 1m. | عدد | 346 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 0.5m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 0.5m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 0.5m. | عدد | 347 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 0.2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 0.2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Orange, 0.2m. | عدد | 348 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Off White, 0.5m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Off White, 0.5m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Off White, 0.5m. | عدد | 349 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Off White, 0.2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Off White, 0.2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Off White, 0.2m. | عدد | 350 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, NIC approved manufacturer. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, NIC approved manufacturer. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, NIC approved manufacturer. | عدد | 351 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 2m. | عدد | 352 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 1m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 1m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 1m. | عدد | 353 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 0.5m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 0.5m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 0.5m. | عدد | 354 | 2094 | 1 |
| مواد | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 0.2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 0.2m. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 0.2m. | عدد | 355 | 2094 | 1 |
| مواد | Caster kit. 2 fixed casters for front of cabinet, 2 swivel casters for rear of cabinet, 4 mounting plates and 24 screws. Casters add 24mm (1") to height of cabinet. Color: Black | 5 | Caster kit. 2 fixed casters for front of cabinet, 2 swivel casters for rear of cabinet, 4 mounting plates and 24 screws. Casters add 24mm (1") to height of cabinet. Color: Black | Caster kit. 2 fixed casters for front of cabinet, 2 swivel casters for rear of cabinet, 4 mounting plates and 24 screws. Casters add 24mm (1") to height of cabinet. Color: Black | عدد | 356 | 0 | |
| مواد | Card reader with keypad | 5 | Card reader with keypad | Card reader with keypad | عدد | 357 | 0 | |
| مواد | Card reader | 5 | Card reader | Card reader | عدد | 358 | 0 | |
| مواد | Cable Organizer 1U | 5 | Cable Organizer 1U | Cable Organizer 1U | عدد | 359 | 0 | |
| مواد | CABLE CONTAINMENT SYSTEM and PVC conduit | 1 | CABLE CONTAINMENT SYSTEM and PVC conduit | A.Supply, installation, testing and commissioning of galvanized steel cable ladders and fittings including purpose made sunshade/ protection covers, bends and junctions, supports, fixings and associated builders works as necessary, etc. All containment for fuel system area, battery room area shall be explosion proof including fittings. Hot dip galvanized Service quotation should consider below points: 1. Wiring, positioning, boring, and duct cleaning; 2. Supports, hangers, and anti-rust and anti-corrosion paint; 3. Supply and installation of body and accessories; 4. Grounding jumper (including through-length ground wires); 5. Internal partition of cable tray (if any); 6. Fireproof partitions and sealing through walls or floors; 7. Other items for the completion of this work, including but not limited to those described above, are included in the comprehensive unit price. B.Supply, installation the PVC and steel tubes. Work content: 1. Excavation and backfilling 2.Body supply and installation; 3. Pipe connection fittings (including plugs ); 4. Pipe clamps, supports, hangers, protective casing,; 5. Ordinary steel casing through walls or floors; 6. Pipe identification or warning tape | عدد | 360 | 0 | |
| مواد | Cabinet Top Cover and Cable Protection Bezel | 5 | Cabinet Top Cover and Cable Protection Bezel | Cabinet Top Cover and Cable Protection Bezel | عدد | 361 | 0 | |
| مواد | Brush Seal Blanking Panel with Front to Back Cable Pass-Through 1 RU | 5 | Brush Seal Blanking Panel with Front to Back Cable Pass-Through 1 RU | Brush Seal Blanking Panel with Front to Back Cable Pass-Through 1 RU | عدد | 362 | 0 | |
| مواد | NIC approved manufacturer LABEL PRINTER RIBBON #TZE1312PK | 5 | NIC approved manufacturer LABEL PRINTER RIBBON #TZE1312PK | NIC approved manufacturer LABEL PRINTER RIBBON #TZE1312PK | عدد | 363 | 0 | |
| مواد | NIC approved manufacturer LABEL PRINTER #PTH110 | 5 | NIC approved manufacturer LABEL PRINTER #PTH110 | NIC approved manufacturer LABEL PRINTER #PTH110 | عدد | 364 | 0 | |
| مواد | NIC approved manufacturerLabelling Tape TZe-221 Labelling Tape – Black on White, 9mm wide | 5 | NIC approved manufacturerLabelling Tape TZe-221 Labelling Tape – Black on White, 9mm wide | NIC approved manufacturerLabelling Tape TZe-221 Labelling Tape – Black on White, 9mm wide | عدد | 365 | 0 | |
| مواد | NIC approved manufacturerLabelling • TZe-221 Labelling Tape – Black on White, 9mm wide TZE221 | 5 | NIC approved manufacturerLabelling • TZe-221 Labelling Tape – Black on White, 9mm wide TZE221 | NIC approved manufacturerLabelling • TZe-221 Labelling Tape – Black on White, 9mm wide TZE221 | عدد | 366 | 0 | |
| مواد | NIC approved manufacturerLabelling • TZe-221 Labelling Tape – Black on White, 24mm wide TZE251 | 5 | NIC approved manufacturerLabelling • TZe-221 Labelling Tape – Black on White, 24mm wide TZE251 | NIC approved manufacturerLabelling • TZe-221 Labelling Tape – Black on White, 24mm wide TZE251 | عدد | 367 | 0 | |
| مواد | NIC approved manufacturer-3.6V Li-ion SCREWDRIVER WITH 8 BITS (CS36BSCROTO) | 5 | NIC approved manufacturer-3.6V Li-ion SCREWDRIVER WITH 8 BITS (CS36BSCROTO) | NIC approved manufacturer-3.6V Li-ion SCREWDRIVER WITH 8 BITS (CS36BSCROTO) | عدد | 368 | 0 | |
| مواد | NIC approved manufacturer- PERCUSSION HAMMER DRILL KITTED- 220V/750W | 5 | NIC approved manufacturer- PERCUSSION HAMMER DRILL KITTED- 220V/750W | NIC approved manufacturer- PERCUSSION HAMMER DRILL KITTED- 220V/750W | عدد | 369 | 0 | |
| مواد | NIC approved manufacturer LI4000 Lithium Rechargeable Srew driver | 5 | NIC approved manufacturer LI4000 Lithium Rechargeable Srew driver | NIC approved manufacturer LI4000 Lithium Rechargeable Srew driver | عدد | 370 | 0 | |
| مواد | NIC approved manufacturer KR805K-QS Electrical Drill W/Hammer | 5 | NIC approved manufacturer KR805K-QS Electrical Drill W/Hammer | NIC approved manufacturer KR805K-QS Electrical Drill W/Hammer | عدد | 371 | 0 | |
| مواد | Battery Analyzer, NIC approved manufacturer BT521 | 5 | Battery Analyzer, NIC approved manufacturer BT521 | Battery Analyzer, NIC approved manufacturer BT521 | عدد | 372 | 0 | |
| مواد | AT-8030 | 5 | AT-8030 | AT-8030 | عدد | 373 | 0 | |
| مواد | Arm mount for outdoor camera (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | Arm mount for outdoor camera (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | Arm mount for outdoor camera | عدد | 374 | 2130 | 1 |
| مواد | NIC approved manufacturer Temperature & Humidity Sensor with Display | 5 | NIC approved manufacturer Temperature & Humidity Sensor with Display | NIC approved manufacturer Temperature & Humidity Sensor with Display | عدد | 375 | 0 | |
| مواد | NIC approved manufacturer NetBotz Particle Sensor PS100 | 5 | NIC approved manufacturer NetBotz Particle Sensor PS100 | NIC approved manufacturer NetBotz Particle Sensor PS100 | عدد | 376 | 0 | |
| مواد | NIC approved manufacturer Modular IT Power Distribution Cable Extender 5 Wire 32A IEC309 300cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer Modular IT Power Distribution Cable Extender 5 Wire 32A IEC309 300cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer Modular IT Power Distribution Cable Extender 5 Wire 32A IEC309 300cm | عدد | 377 | 2094 | 1 |
| مواد | NIC approved manufacturer Modular IT Power Distribution Cable Extender 5 Wire 16A IEC309 300cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer Modular IT Power Distribution Cable Extender 5 Wire 16A IEC309 300cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer Modular IT Power Distribution Cable Extender 5 Wire 16A IEC309 300cm | عدد | 378 | 2094 | 1 |
| مواد | NIC approved manufacturer Modular IT Power Distribution Cable Extender 3 Wire 32A IEC309 600cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer Modular IT Power Distribution Cable Extender 3 Wire 32A IEC309 600cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer Modular IT Power Distribution Cable Extender 3 Wire 32A IEC309 600cm | عدد | 379 | 2094 | 1 |
| مواد | NIC approved manufacturer Modular IT Power Distribution Cable Extender 3 Wire 32A IEC309 480cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer Modular IT Power Distribution Cable Extender 3 Wire 32A IEC309 480cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer Modular IT Power Distribution Cable Extender 3 Wire 32A IEC309 480cm | عدد | 380 | 2094 | 1 |
| مواد | NIC approved manufacturer Modular IT Power Distribution Cable Extender 3 Wire 32A IEC309 240cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | NIC approved manufacturer Modular IT Power Distribution Cable Extender 3 Wire 32A IEC309 240cm (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | NIC approved manufacturer Modular IT Power Distribution Cable Extender 3 Wire 32A IEC309 240cm | عدد | 381 | 2094 | 1 |
| مواد | NIC approved manufacturer Alarm Beacon | 5 | NIC approved manufacturer Alarm Beacon | NIC approved manufacturer Alarm Beacon | عدد | 382 | 0 | |
| مواد | Anti-Static Wrist Strap P999-000 | 5 | Anti-Static Wrist Strap P999-000 | Anti-Static Wrist Strap P999-000 | عدد | 383 | 0 | |
| مواد | NIC approved manufacturer, 3/8'' TORQUE WRENCH 10-50NM-DUAL SCALE (N.m & IN.LB) W/ CERTIFICATE | 5 | NIC approved manufacturer, 3/8'' TORQUE WRENCH 10-50NM-DUAL SCALE (N.m & IN.LB) W/ CERTIFICATE | NIC approved manufacturer, 3/8'' TORQUE WRENCH 10-50NM-DUAL SCALE (N.m & IN.LB) W/ CERTIFICATE | عدد | 384 | 0 | |
| مواد | NIC approved manufacturer, ' TORQUE WRENCH 5-25NM-DUAL SCALE (N.m & IN.LB) W | 5 | NIC approved manufacturer, ' TORQUE WRENCH 5-25NM-DUAL SCALE (N.m & IN.LB) W | NIC approved manufacturer, ' TORQUE WRENCH 5-25NM-DUAL SCALE (N.m & IN.LB) W | عدد | 385 | 0 | |
| مواد | NIC approved manufacturer RopeWaterSensor (Replacement for faulty sensor in Ground Floor) | 5 | NIC approved manufacturer RopeWaterSensor (Replacement for faulty sensor in Ground Floor) | NIC approved manufacturer RopeWaterSensor (Replacement for faulty sensor in Ground Floor) | عدد | 386 | 0 | |
| مواد | NIC approved manufacturer Monitoring Device SEC5ES-X20 | 5 | NIC approved manufacturer Monitoring Device SEC5ES-X20 | NIC approved manufacturer Monitoring Device SEC5ES-X20 | عدد | 387 | 0 | |
| مواد | Air boost fan for raised floor (Airboost Manual Control)-3X5 | 5 | Air boost fan for raised floor (Airboost Manual Control)-3X5 | Air boost fan for raised floor (Airboost Manual Control)-3X5 | عدد | 388 | 0 | |
| مواد | NIC approved manufacturerParticulate and Gaseous Contamination in Datacom Environments | 5 | NIC approved manufacturerParticulate and Gaseous Contamination in Datacom Environments | NIC approved manufacturerParticulate and Gaseous Contamination in Datacom Environments | عدد | 389 | 0 | |
| مواد | NIC approved manufacturerSINGLE interface module | 5 | NIC approved manufacturerSINGLE interface module | NIC approved manufacturer SINGLE interface module | عدد | 390 | 0 | |
| مواد | NIC approved manufacturerDUAL interface module | 5 | NIC approved manufacturerDUAL interface module | NIC approved manufacture rDUAL interface module | عدد | 391 | 0 | |
| مواد | NIC approved manufacturercontroller | 5 | NIC approved manufacturercontroller | NIC approved manufacturer controller | عدد | 392 | 0 | |
| مواد | ACCS-NIC approved manufacturer, BONNET POLISHING 178MM | 5 | ACCS-NIC approved manufacturer, BONNET POLISHING 178MM | ACCS-NIC approved manufacturer, BONNET POLISHING 178MM | عدد | 393 | 0 | |
| مواد | 6-port HD Flex MPO FAP with Type B adapter (Key-up to Key-up); Charcoal Gray | 5 | 6-port HD Flex MPO FAP with Type B adapter (Key-up to Key-up); Charcoal Gray | 6-port HD Flex MPO FAP with Type B adapter (Key-up to Key-up); Charcoal Gray | عدد | 394 | 0 | |
| مواد | 600mmW x 42 RU x 1200mmD S-Typ+C61e Universal, Doors, Side Panels, CM, Casters, BL | 1 | 600mmW x 42 RU x 1200mmD S-Typ+C61e Universal, Doors, Side Panels, CM, Casters, BL | 600mmW x 42 RU x 1200mmD S-Typ+C61e Universal, Doors, Side Panels, CM, Casters, BL | عدد | 395 | 0 | |
| مواد | 6" x 6" Cool Boot ® Cabinet Top Air Sealing Fitting | 5 | 6" x 6" Cool Boot ® Cabinet Top Air Sealing Fitting | 6" x 6" Cool Boot ® Cabinet Top Air Sealing Fitting | عدد | 396 | 0 | |
| مواد | 48-fiber OS2 singlemode low smoke zero halogen rated indoor/outdoor stranded cable. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 48-fiber OS2 singlemode low smoke zero halogen rated indoor/outdoor stranded cable. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 48-fiber OS2 singlemode low smoke zero halogen rated indoor/outdoor stranded cable. | عدد | 397 | 2114 | 1 |
| مواد | NIC approved manufacturer Safety Vest (Sizes large | 5 | NIC approved manufacturer Safety Vest (Sizes large | NIC approved manufacturer Safety Vest (Sizes large | عدد | 398 | 0 | |
| مواد | NIC approved manufacturer Safety Vest ( large Size) | 5 | NIC approved manufacturer Safety Vest ( large Size) | NIC approved manufacturer Safety Vest ( large Size) | عدد | 399 | 0 | |
| مواد | NIC approved manufacturer GLOVES ELECTRICAL GLOVES #DEXFIT CRU553 | 5 | NIC approved manufacturer GLOVES ELECTRICAL GLOVES #DEXFIT CRU553 | NIC approved manufacturer GLOVES ELECTRICAL GLOVES #DEXFIT CRU553 | عدد | 400 | 0 | |
| مواد | NIC approved manufacturer Cable Tie (Various Size) | 5 | NIC approved manufacturer Cable Tie (Various Size) | NIC approved manufacturer Cable Tie (Various Size) | عدد | 401 | 0 | |
| مواد | NIC approved manufacturer (Super 33+20X19) Electrical Tape | 5 | NIC approved manufacturer (Super 33+20X19) Electrical Tape | NIC approved manufacturer (Super 33+20X19) Electrical Tape | عدد | 402 | 0 | |
| مواد | 3" x 5" Cool Boot ® Cabinet Top Air Sealing Fitting | 5 | 3" x 5" Cool Boot ® Cabinet Top Air Sealing Fitting | 3" x 5" Cool Boot ® Cabinet Top Air Sealing Fitting | عدد | 403 | 0 | |
| مواد | 3 Year StruxureWare Data Center Expert Basic Software Support Contract | 5 | 3 Year StruxureWare Data Center Expert Basic Software Support Contract | 3 Year StruxureWare Data Center Expert Basic Software Support Contract | عدد | 404 | 0 | |
| مواد | 26" Classic C75 Tool Trolleys with 8 Drawers | 5 | 26" Classic C75 Tool Trolleys with 8 Drawers | 26" Classic C75 Tool Trolleys with 8 Drawers | عدد | 405 | 0 | |
| مواد | 2 RU L-ring cable retainer, 85mm (3.4") x 100mm (3.8"), bag of 8pcs, attaches to S2BRK6 | 5 | 2 RU L-ring cable retainer, 85mm (3.4") x 100mm (3.8"), bag of 8pcs, attaches to S2BRK6 | 2 RU L-ring cable retainer, 85mm (3.4") x 100mm (3.8"), bag of 8pcs, attaches to S2BRK6 | عدد | 406 | 0 | |
| مواد | 2 RU D-ring cable retainer, 80mm (3.1") x 80mm (3.1"), bag of 8 pcs, attaches to S2BRK6 | 5 | 2 RU D-ring cable retainer, 80mm (3.1") x 80mm (3.1"), bag of 8 pcs, attaches to S2BRK6 | 2 RU D-ring cable retainer, 80mm (3.1") x 80mm (3.1"), bag of 8 pcs, attaches to S2BRK6 | عدد | 407 | 0 | |
| مواد | 2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 3 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 3 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 3 meter | عدد | 408 | 2114 | 1 |
| مواد | 2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 2 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 2 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 2 meter | عدد | 409 | 2114 | 1 |
| مواد | 2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 1 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 1 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 1 meter | عدد | 410 | 2114 | 1 |
| مواد | 2 fiber OM4 LC duplex to LC duplex patch cord, low smoke zero halogen (LSZH) 16mm jacketed cable, with Std IL , 2 Feet (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OM4 LC duplex to LC duplex patch cord, low smoke zero halogen (LSZH) 16mm jacketed cable, with Std IL , 2 Feet (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OM4 LC duplex to LC duplex patch cord, low smoke zero halogen (LSZH) 16mm jacketed cable, with Std IL , 2 Feet | عدد | 411 | 2114 | 1 |
| مواد | 2 fiber OM4 LC duplex to LC duplex patch cord, low smoke zero halogen (LSZH) 16mm jacketed cable, with Std IL , 1 Feet (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OM4 LC duplex to LC duplex patch cord, low smoke zero halogen (LSZH) 16mm jacketed cable, with Std IL , 1 Feet (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OM4 LC duplex to LC duplex patch cord, low smoke zero halogen (LSZH) 16mm jacketed cable, with Std IL , 1 Feet | عدد | 412 | 2114 | 1 |
| مواد | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 7 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 7 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 7 meter | عدد | 413 | 2114 | 1 |
| مواد | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 5 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 5 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 5 meter | عدد | 414 | 2114 | 1 |
| مواد | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 3 meters (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 3 meters (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 3 meters | عدد | 415 | 2114 | 1 |
| مواد | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 2 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 2 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 2 meter | عدد | 416 | 2114 | 1 |
| مواد | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 10 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 10 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 10 meter | عدد | 417 | 2114 | 1 |
| مواد | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 1 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 1 meter (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 2 fiber OM4 16mm jacket patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex, Std IL 1 meter | عدد | 418 | 2114 | 1 |
| مواد | #6 AWG green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | #6 AWG green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | #6 AWG green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L. | عدد | 419 | 2094 | 1 |
| مواد | #6 AWG (16mm²) jumper, 96 in. (2.44mm²) L, pre-terminated with two straight slotted lugs to provide a bolt-on solution for grounding network equipment. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | #6 AWG (16mm²) jumper, 96 in. (2.44mm²) L, pre-terminated with two straight slotted lugs to provide a bolt-on solution for grounding network equipment. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | #6 AWG (16mm²) jumper, 96 in. (2.44mm²) L, pre-terminated with two straight slotted lugs to provide a bolt-on solution for grounding network equipment. | عدد | 420 | 2094 | 1 |
| مواد | #6 AWG (16mm²) jumper, 90° bent lug on grounding strip side to straight lug on equipment, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | #6 AWG (16mm²) jumper, 90° bent lug on grounding strip side to straight lug on equipment, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | #6 AWG (16mm²) jumper, 90° bent lug on grounding strip side to straight lug on equipment, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws. | عدد | 421 | 2094 | 1 |
| مواد | #6 AWG (16mm²) jumper, 60 in. (1.52mm²) L, pre-terminated with two straight slotted lugs to provide a bolt-on solution for grounding network equipment. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | #6 AWG (16mm²) jumper, 60 in. (1.52mm²) L, pre-terminated with two straight slotted lugs to provide a bolt-on solution for grounding network equipment. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | #6 AWG (16mm²) jumper, 60 in. (1.52mm²) L, pre-terminated with two straight slotted lugs to provide a bolt-on solution for grounding network equipment. | عدد | 422 | 2094 | 1 |
| مواد | #6 AWG (16mm²) green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | #6 AWG (16mm²) green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | #6 AWG (16mm²) green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L. | عدد | 423 | 2094 | 1 |
| مواد | #10 AWG (6mm²) jumper; 24 (.61m) length; factory terminated on both ends; one-hole lug on surge suppressor to two-hole lug on grounding strip/busbar side; provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | #10 AWG (6mm²) jumper; 24 (.61m) length; factory terminated on both ends; one-hole lug on surge suppressor to two-hole lug on grounding strip/busbar side; provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | #10 AWG (6mm²) jumper; 24 (.61m) length; factory terminated on both ends; one-hole lug on surge suppressor to two-hole lug on grounding strip/busbar side; provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws. | عدد | 424 | 2094 | 1 |
| مواد | #10 AWG (6mm²) jumper, 90° bent lug on grounding strip side, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | #10 AWG (6mm²) jumper, 90° bent lug on grounding strip side, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws. (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | #10 AWG (6mm²) jumper, 90° bent lug on grounding strip side, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws. | عدد | 425 | 2094 | 1 |
| مواد | #10 AWG (6mm²) jumper, 90° bent lug on grounding strip side, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | #10 AWG (6mm²) jumper, 90° bent lug on grounding strip side, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | #10 AWG (6mm²) jumper, 90° bent lug on grounding strip side, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws | عدد | 426 | 2094 | 1 |
| مواد | Safety Gloves | 5 | Safety Gloves | Safety Gloves | عدد | 427 | 0 | |
| مواد | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 7m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | 5 | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 7m (مع مراعاة الالتزام بجميع منتجات القائمة الإلزامية) | OM4 12 fiber interconnect cable assembly Low Smoke Zero Halogen (LSZH) PanMPO female to PanMPO female Method B Optimized IL, with no pulling eye, 7m | عدد | 428 | 2114 | 1 |
| مواد | NIC approved manufacturer Labelling Tape TZe-251 Labelling Tape – Black on White, 24mm wide | 5 | NIC approved manufacturer Labelling Tape TZe-251 Labelling Tape – Black on White, 24mm wide | NIC approved manufacturerLabelling Tape TZe-251 Labelling Tape – Black on White, 24mm wide | عدد | 429 | 0 | |
| تدريب | دورة تصميم الشبكة لمركز البيانات | 1 | دورة تصميم الشبكة لمركز البيانات | REGISTERED COMMUNICATIONS DISTRIBUTION DESIGNER for 4 people for 7 days- overseas | عدد | 430 | 0 | |
| تدريب | دورة إدارة مشاريع مركز البيانات | 1 | دورة إدارة مشاريع مركز البيانات | Certified Data Centre Project Management for 8 people for 5 days- overseas | عدد | 431 | 0 |
431 بند
كراسة الشروط الرئيسية
المستندات الداعمة (17 ملف)
| اسم المورد | قيمة العرض (ر.س) | قيمة الترسية (ر.س) | النتيجة الفنية | الحالة |
|---|---|---|---|---|
| شركة المعمر لانظمة المعلومات | 227,761,361.70 | — | مطابق | مشارك |
| شركة بعد للاتصالات السلكية واللاسلكية شركة شخص واحد | 275,004,491.00 | — | مطابق | مشارك |
| شركة اعمار التنفيذية لتقنية المعلومات | 230,781,518.15 | — | غير مطابق | مشارك |
| الشركة السعودية للحاسبات الالكترونية المحدودة | 227,484,173.75 | — | مطابق | مشارك |
| شركة بيت الاجادة للتجارة و التقنية شخص واحد شركة شخص واحد | 279,881,414.45 | — | مطابق | مشارك |
| شركة الشبكات للاتصالات وتقنية المعلومات | 232,955,014.70 | — | غير مطابق | مشارك |
| شركة تحكم التقنية المحدوده شركة شخص واحد | 322,863,374.00 | — | غير مطابق | مشارك |
| شركة بلت الصناعية شركة شخص واحد | 335,129,912.67 | — | غير مطابق | مشارك |
| شركة العرض المتقن للخدمات التجارية شركة مساهمة سعودية | 291,544,072.85 | — | غير مطابق | مشارك |
| شركة جيزة العربية للأنظمة | 284,880,447.90 | — | غير مطابق | مشارك |
| شركة المعمر لانظمة المعلومات | 227,761,361.70 | 227,761,361.70 | — | مرسّى |
الآليات
القائمة الإلزامية
آلية وزن المحتوى المحلي في التقييم المالي
معايير التقييم
معايير التقييم الفني
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم الفني |
معايير التقييم المالي
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم المالي | السعر | التكلفة الكلية | 100% |
أخبار المنافسة
title
تاريخ الإنشاء
value
22/04/45 03:46:44 م
title
تاريخ فتح العروض
value
15/01/46 02:00:00 م
title
تمديد تواريخ المنافسة
value
تاريخ فتح العروض15/01/46 02:00:00 مآخر موعد لتقديم العروض15/01/46 01:00:00 مآخر موعد لإستلام الإستفسارات05/01/46 12:00:00 ص
title
تاريخ الترسيه
value
06/08/1446