منافسة عامة
✓ مرسّى
توريد زيوت وشحوم وزيوت التشحيم للقوات البحرية
القوات البحرية
رقم المنافسة
240639000491
المعرّف
#796146
عنوان الضمان الإبتدائى
قيادة القوات البحرية
الغرض من المنافسة
توريد زيوت وشحوم وزيوت التشحيم للقوات البحرية
| التاريخ | ميلادي | هجري |
|---|---|---|
| تاريخ النشر | 2024/06/25 08:48 | — |
| آخر موعد للاستفسارات | 2024/07/24 | 1446-01-18 |
| آخر موعد تقديم العروض | 2024/07/31 08:00 | 1446-01-25 |
| موعد فتح العروض | 2024/07/31 08:30 | 1446-01-25 |
| موعد فحص العروض | — | — |
| التاريخ المتوقع للترسية | 2024/09/29 | 1446-03-26 |
| تاريخ بدء الأعمال | 2024/10/14 | 1446-04-11 |
| تاريخ خطاب تأكيد المشاركة | — | — |
| بداية إرسال الأسئلة | 2024/07/30 | 1446-01-24 |
| أقصى مدة للإجابة | 10 يوم | |
| مكان فتح العروض | الرياض - القوات البحرية الملكية السعودية - المبنى رقم 5 | |
| مدة الوقفة | 5 يوم |
موقع التنفيذ
مجال التصنيف
الأنشطة
- • البترول
جدول 1 المواد - نموذج عام
| البند | الفئة | الكمية | وصف البند | المواصفات | وحدة القياس | الرقم التسلسلي | منتج من القائمة الإلزامية | ملف البند |
|---|---|---|---|---|---|---|---|---|
| DETERGENTGENERALP | 1 | 180 | MRAP BUFFALO MK2A2, LIQUID,1.000 GALLONS,NONMEDICATED,WATER,DETERGENT GENERAL PURPOSE NONMEDICATED LIQUID 1 GALLON CAN; BOX CONTAINS 6, 1 GALLON CONTAINERS,GENERAL PURPOSE DETERGENT (LIQUID, NONIONIC) THAT CONFORMS TO MIL-D-16791, TYPE 1 - WATER SOLUBLE; BOX (6) EACH, (1) GALLON CONTAINERS PER BOX,1 TYPE | GL | 1 | 0 | FINAL الزيوت والشحوم منافسة لمدة سنه.pdf | |
| HYDRAULIC FLUIDFIR | 2 | 140 | NATO H-537. MIL-PRF-83282D Amd 1, OX-19. MIL-H-83282C. DCSEA 437/A. Synthetic hydrocarbons containing up to 33 percent mass of diesters, with additives. Color: Red. Viscosity: 1.0 cSt (Minimum) @ 205C / 3.45 cSt (Minimum) @ 100C / 14.0 cSt (Minimum) @ 40C / 2200 cSt (Maximum) cSt @ -40C. Minimum Flash Point: 205C. Maximum Pour Point: -55C. Effective Temperature Rating: -40 to +400F | Synthetic Hydraulic Oil, Fire Resistant | GL | 2 | 0 | — |
| HYDRAULIC FLUIDFIR | 3 | 70 | NATO H-537. MIL-PRF-83282D Amd 1, OX-19. MIL-H-83282C. DCSEA 437/A. Synthetic hydrocarbons containing up to 33 percent mass of diesters, with additives. Color: Red. Viscosity: 1.0 cSt (Minimum) @ 205C / 3.45 cSt (Minimum) @ 100C / 14.0 cSt (Minimum) @ 40C / 2200 cSt (Maximum) cSt @ -40C. Minimum Flash Point: 205C. Maximum Pour Point: -55C. Effective Temperature Rating: -40 to +400F | Hydraulic Fluid, Synthetic, Fire Resistant | GL | 3 | 0 | — |
| HYDRAULIC FLUIDFIR | 4 | 85 | NATO H-537. MIL-PRF-83282D Amd 1, OX-19. MIL-H-83282C. DCSEA 437/A. Synthetic hydrocarbons containing up to 33 percent mass of diesters, with additives. Color: Red. Viscosity: 1.0 cSt (Minimum) @ 205C / 3.45 cSt (Minimum) @ 100C / 14.0 cSt (Minimum) @ 40C / 2200 cSt (Maximum) cSt @ -40C. Minimum Flash Point: 205C. Maximum Pour Point: -55C. Effective Temperature Rating: -40 to +400F | CN | 4 | 0 | — | |
| LUBRICATING OILENG | 5 | 50 | MIL-PRF-2104G, MIL-L-2104F, A-A-52039A. Basic Ingredient: Any acceptable. Anti-wear, anti-foam, and corrosion resistive. Viscosity: 5.6 – 7.4 cSt @ 100C. Maximum Pour Point: -18C. Minimum Flash Point: 220C. Minimum API Performance: CD. Grade 10W | Spark and Compression Ignition Engine Oil, Grade 10W | CN | 5 | 0 | — |
| LUBRICATING OILSEM | 6 | 50 | NATO O-158. MIL-L-46000C. Mineral or synthetic oil w/ additives required to meet the specification. Oxidation resistant. Anti-wear and corrosion resistive. Viscosity: 10.0 cSt (Minimum) @ 40C / 12000 cSt (Maximum) @ -64C. Effective Temperature Rating: -65 to +300F. | Semi-Fluid Weapons Cleaner, Lubricant, and Preservative | QT | 6 | 0 | — |
| LUBRICATING OILREF | 7 | 35 | NATO O-283. VV-L-825C Type II. STM7272 Iss 1 Amd 3 CF-2. MS RCO-2. Well-refined petroleum oils without added mixtures of fatty acids, fatty oils, resins, soaps, or other objectionable materials. Viscosity: 61.2 – 74.8 cSt @ 40C. Minimum Flash Point: 177C. Maximum Pour Point: -34C. Maximum Floc Point: -46C. Maximum Total Acid No. (KOH/g): 0.05. Minimum Dielectric Strength: 25 Kv. Aniline Point: 71 – 90C. API Gravity: 21 – 26. Chemical Stability (% R-22): 0.8 – 1.5%. Corrosion: 1A. Maximum Carbon Residue: 0.3%. Maximum Ash: 0.005%. Maximum Moisture: 35 ppm. | Mineral or Synthetic , PAO-Based Oil for R-11/ R-12 Refrigerant Compressors – VG 68 | GL | 7 | 0 | — |
| LUBRICATING OILGEN | 8 | 70 | NATO O-190. Def Stan 91-79/1, OX-18. VV-L-800C Amd 1. MIL-PRF-32033, MS PL-S. Basic Ingredient: Petroleum base and additives. Type Lubricant: Any acceptable. Oxidation resistant. Corrosion resistive. Viscosity: 12.0 cSt (Minimum) @ 100F / 7000 cSt (Maximum) @ -40F / 60000 cSt (Maximum) @ -70F. Maximum Pour Point: -70F. Minimum Flash Point: 275F. | Water Displacing, Low Temperature Lubricating Oil, MS PL-S | CN | 8 | 0 | — |
| CLEANING COMPOUNDS | 9 | 30 | SOLUTION, 5.0 GAL,I TYPE | MIL-C-81302D | CN | 9 | 0 | — |
| HYDRAULIC FLUIDAUT | 10 | 30 | NATO H-548, XH-36. STANAG 7093, OX-75. DCSEA 403/A Iss 1. Color: Red. Anti-wear and oxidation resistant. Corrosion Resistive. Viscosity: 32 cSt (Nominal) @ 40C / 7 cSt @ (Nominal) @ 100C. Minimum Flash Point: 196C. Maximum Pour Point: -42C. ISO VG 32 | Automatic Transmission Fluid, DEXRON II | QT | 10 | 0 | — |
| OILTRANSMISSION | 11 | 25 | Automatic Transmission Fluid, DEXRON II | BX | 11 | 0 | — | |
| LUBRICATING OILSTE | 12 | 50 | MIL-PRF-17331H Amd 3, MIL-L-17331H Amd 2, NATO O-250, MS 2190TEP. Non-corrosive mineral oil w/ special oxidation and rust-inhibiting additives. Fatty Material: Any acceptable. Basic Ingredient: Any Acceptable. Service Characteristics: Anti-foam and corrosion resistive. Oxidation resistant. Viscosity: 8.2 cSt (Minimum) @ 210F / 82.0 – 110.0 cSt @ 100F. Maximum Pour Point: 20F. Minimum Flash Point: 400F. MS 2190-TEP. | Lubricating Oil, Steam Turbine and Gear, Moderate Service MS 2190-TEP | DR | 12 | 0 | — |
| LUBRICATING OILSTE | 13 | 25 | MIL-PRF-17331H Amd 3, MIL-L-17331H Amd 2, NATO O-250, MS 2190TEP. Non-corrosive mineral oil w/ special oxidation and rust-inhibiting additives. Viscosity: 8.2 cSt (Minimum) @ 210F / 82.0 – 110.0 cSt @ 100F. Maximum Pour Point: 20F. Minimum Flash Point: 400F. MS 2190-TEP. | DR | 13 | 0 | — | |
| GREASEWATERWASH R | 14 | 115 | WATER WASH RESISTANT GREASE, 300 POISES AT 200 MAXIMUM APPARENT VISCOSITY; 500 DEG F MINIMUM DROP POINT; 15 TO 350 DEG F OPERATING RANGE | CN | 14 | 0 | — | |
| HYDRAULIC FLUIDPET | 15 | 110 | NATO H-576. Def Stan 91-39/3, OM-33. MIL-H-17672D Amd 2 Grade 2075 TH. STM 7220/B Amd TH1 Low Viscosity Index. MS 2075-T-H. Basic Ingredient: Mineral oil w/ possible anti-oxidation, anti-corrosion, and anti-wear additives. Use of additives containing metals is prohibited. Viscosity: 28.8 – 35.2 cSt @ 40C / 500 cSt (Maximum) @ 0C. Minimum Flash Point: 160C. Maximum Pour Point: -30C. ISO VG 32 | TH1-Type/ Anti-Wear Hydraulic Fluid, ISO VG 32 | CN | 15 | 0 | — |
| LUBRICATING OILAIR | 16 | 1350 | NATO O-156. Def Stan 91-101/3, DERD 2499, OX-27. MIL-PRF-23699F Class STD. Synthetic oil w/ additives and inhibitors required to meet the specification. Anti-foam, anti-wear, and corrosion resistive. Oxidation, high and low temperature resistant. Viscosity: 25 cSt (Minimum) @ 100F / 5.0 – 5.5 cSt @ 210F. Maximum Pour Point: -65F. Minimum Flash Point: 475F | Synthetic Turbine Engine Oil, 5 cSt | QT | 16 | 0 | — |
| LUBRICATING OILAIR | 17 | 35 | NATO O-156. Def Stan 91-101/3, DERD 2499, OX-27. MIL-PRF-23699F Class STD. Synthetic oil w/ additives and inhibitors required to meet the specification. Anti-foam, anti-wear, and corrosion resistive. Oxidation, high and low temperature resistant. Viscosity: 25 cSt (Minimum) @ 100F / 5.0 – 5.5 cSt @ 210F. Maximum Pour Point: -65F. Minimum Flash Point: 475F | CN | 17 | 0 | — | |
| LUBRICATING OILAIR | 18 | 120 | NATO O-156. Def Stan 91-101/3, DERD 2499, OX-27. MIL-PRF-23699F Class STD. Synthetic oil w/ additives and inhibitors required to meet the specification. Anti-foam, anti-wear, and corrosion resistive. Oxidation, high and low temperature resistant. Viscosity: 25 cSt (Minimum) @ 100F / 5.0 – 5.5 cSt @ 210F. Maximum Pour Point: -65F. Minimum Flash Point: 475F | QT | 18 | 0 | — | |
| HYDRAULIC FLUIDPET | 19 | 50 | MIL-PRF-17672D Amd 3 MS 2135TH. MIL-H-17672D Amd 3 Grade 2110-TH. STM 7220/B Iss 3 Amd 1 TH3. Basic Ingredient: Additives and petroleum base. Oxidation resistant / corrosion resistive. Viscosity: 6.6 – 7.5 cSt @ 210F / 2800 cSt (Maximum) @ 10F. Maximum Pour Point: 0F. Minimum Flash Point: 340F. MS 2135-T-H | TH3-Type/ MS 2135 T-H Hydraulic Oil, ISO VG 68 | CN | 19 | 0 | — |
| LUBRICATING OILREF | 20 | 100 | NATO O-283. VV-L-825C Type II. STM7272 Iss 1 Amd 3 CF-2. MS RCO-2. Well-refined petroleum oils without added mixtures of fatty acids, fatty oils, resins, soaps, or other objectionable materials. Viscosity: 61.2 – 74.8 cSt @ 40C. Minimum Flash Point: 177C. Maximum Pour Point: -34C. Maximum Floc Point: -46C. Maximum Total Acid No. (KOH/g): 0.05. Minimum Dielectric Strength: 25 Kv. Aniline Point: 71 – 90C. API Gravity: 21 – 26. Chemical Stability (% R-22): 0.8 – 1.5%. Corrosion: 1A. Maximum Carbon Residue: 0.3%. Maximum Ash: 0.005%. Maximum Moisture: 35 ppm. | Mineral or Synthetic , PAO-Based Oil for R-11/ R-12 Refrigerant Compressors – VG 68 | GL | 20 | 0 | — |
| GREASEGENERAL PURP | 21 | 30 | MIL-G-23549C. Mineral oil and molybdenum disulfide. Low evaporation and salt water-resistant. Corrosion resistive. Maximum Operating Temperature: 400F. Minimum Dropping Point: 450F. Worked Penetration: 270 - 315 | General Purpose, High Temperature Grease | CN | 21 | 0 | — |
| GREASEAIRCRAFT AND | 22 | 110 | NATO G-354. Def Stan 91-53/2, XG-287. MIL-PRF-23827C. Air 4210/B Iss 3. Mineral or ester-type synthetic oil w/ gelling agent, anti-oxidant and anti-corrosion inhibitors, and extreme pressure additives. Minimum Dropping Point: 180C. NGLI 2. Worked Penetration: 265-295. Effective Temperature Rating: -73 to +121C. | Multi-Purpose, Low Temperature Grease | CN | 22 | 0 | — |
| GREASEAIRCRAFT AND | 23 | 5 | NATO G-354. Def Stan 91-53/2, XG-287. MIL-PRF-23827C. Air 4210/B Iss 3. Mineral or ester-type synthetic oil w/ gelling agent, anti-oxidant and anti-corrosion inhibitors, and extreme pressure additives. Minimum Dropping Point: 180C. NGLI 2. Worked Penetration: 265-295. Effective Temperature Rating: -73 to +121C. | CN | 23 | 0 | — | |
| ETHYLENE GLYCOLTEC | 24 | 65 | ASTM-E-1119. Total Glycols: 99.5%. Water: 0.5% (Max). Chlorides: None. Acidity (Acetic Acid): 0.01%. Ash Residue: 0.005 Grams/100ml (Max). Color: Not more than 15 on platinum cobalt scale. Minimum Flash Point: -116C. Specific Gravity: 1.1151 to 1.1156 @ 20C | Technical Ethylene Glycol | GL | 24 | 0 | — |
| PRIMER COATING | 25 | 40 | CORROSION RESISTIVE PRIMER, SPRAYING AS IS, 16.000 OUNCES, LEAD FREE, ZINC CHROMATE, 15.000 MINUTES MAXIMUM, 340.0, FOR USE ON ALUMINUM AND ALUMINUM ALLOY STRUCTURES AND SURFACES AND ON SURFACES PRETREATED WITH MIL-C-8514 OR DOD-P-15328 COATING; 11.5 OZ NET WEIGHT CAN, YELLOW, 2 TYPE AND C CLASS | TTP1757-2CY-001P | PT | 25 | 0 | — |
| CLEANING COMPOUND | 26 | 50 | MIL-PRF-85570, MIL-C-85570 B Amd 1. A compound used in a solution of water for cleaning and washing of painted or unpainted aircraft surfaces. Application Method: Any acceptable. Appearance: Yellow, stable, inflammable liquid. Odor: Detergent. Inflammable. | CN | 26 | 0 | — | |
| CLEANING COMPOUNDA | 27 | 120 | MIL-PRF-85570, MIL-C-85570 B Amd 1. A compound used in a solution of water for cleaning and washing of painted or unpainted aircraft surfaces. Application Method: Any acceptable. Appearance: Yellow, stable, inflammable liquid. Odor: Detergent. Inflammable. | Aircraft Surface Cleaning Compound | CN | 27 | 0 | — |
| LUBRICATING OILENG | 28 | 25 | MIL-PRF-9000, MIL-L-9000H MS 9250. Basic Ingredient: Additives and petroleum oil. Anti-foam and water-resistant. Viscosity: 11.9 -14.5 cSt @ 210F. Maximum Pour Point: 10F. Minimum Flash Point: 390F. Grade 9250, Type 1. | Diesel Engine Oil, Grade 30W/40 | CN | 28 | 0 | — |
| HYDRAULIC FLUIDPET | 29 | 60 | Basic Ingredient: Mineral oil. Oxidation and wear resistant. Corrosion resistive. Viscosity: 1000 cSt (Maximum) @ -31F / 500 cSt (Maximum) @ -4F / 25 cSt (Minimum) @ 104F / 8 cSt (Minimum) @ 212F. Maximum Pour Point: -40F. Minimum Flash Point: 220F. Minimum Fire Point: 235F. Color: Any Acceptable. Must not contain Tricresyl-phosphate. | Hydraulic Fluid, Petroleum Base | CN | 29 | 0 | — |
| HYDRAULIC FLUIDPET | 30 | 165 | NATO H-575. MIL-DTL-17111C OS. MIL-F-17111C OS. Basic Ingredient: Additives, mineral oil, and Tricresyl phosphate. Oxidation and wear resistant. Corrosion resistive. Viscosity: 1000 cSt (Maximum) @ -35C / 500 cSt (Maximum) @ -20C / 25 cSt (Minimum) @ +40C / 8 cSt (Minimum) @ +100C. Maximum Pour point: -40C. Minimum Flash Point: 100C. Minimum Fire Point: 235C. Hues: 2 Maximum. Color: Any acceptable. | Hydraulic Fluid, Petroleum Base, Ordnance Systems (OS) | CN | 30 | 0 | — |
| LUBRICATING OILGEA | 31 | 25 | AGMA 9005-D94 – 2EP, DIN 51517 Part 3 CLP 68, ISO 12925-1 Type CKC 68. Highly refined-based stocks w/ extreme pressure, anti-wear, anti-oxidation, and anti-foam additives. ISO VG 68. Viscosity: 68 cSt @ 40C / 9.2 cSt @ 40C. Minimum Viscosity. Index 98. Maximum Pour Point -27C. Minimum Flash Point: 225C. Timken OK Load: 65 Lbs. | Gear Oil ISO VG 68 | CN | 31 | 0 | — |
| GREASEAIRCRAFT | 32 | 25 | NATO G-392. MIL-G-4343C. SAE-AMS-G-4343, XG-269. Silicone-based synthetic oil w/ gelling agent. Minimum Dropping Point: 163C. Worked Penetration: 260-300. Effective Temperature Rating: -55 to +95C | Synthetic, Pneumatic Systems Grease, Contains Silicone | CN | 32 | 0 | — |
| PETROLATUMTECHNICA | 33 | 25 | NATO S-743. Def Stan 91-38/1, PX-7. VV-P-236A Amd 2. AIR 3565/A Iss 2. Very highly refined mineral oils and hydrocarbon waxes. Insoluble in water. Soluble in solvents. Approximate Dropping Point: 47C. Minimum Melting Point: 40C. Minimum Flash Point: 205C. Worked Penetration: 230 – 275. | White Petroleum Jelly / Technical Petrolatum | CN | 33 | 0 | — |
| HYDRAULIC FLUIDPET | 34 | 55 | NATO H-515. MIL-H-5606G. Def Stan 91-48/2, OM-15. DCSEA 415/A. Light mineral oil blended w/ an oxidation inhibitor, including not more than 20 percent viscosity index improver and 0.5 percent of a technically acceptable non-toxic triaryl phosphate as an anti-wear agent. Color, Lovibond Red: 20-40. Viscosity: 4.0 cSt @ 100C / 13.0 cSt @ 40C / 500 cSt @ -40C / 3000 cSt @ -54C. Maximum Pour Point: -60C. Minimum Flash Point: 81C. Effective Temperature Rating: -54 to +90C in pressurized systems; -54 to +135C in pressurized systems. | Hydraulic Fluid, Petroleum: Superclean | GL | 34 | 0 | — |
| GREASEAIRCRAFT AND | 35 | 25 | AA-59173-I-A. MIL-G-46886B. Polymethylthenyl silicone fluid – lithium soap. Low evaporation and oxidation resistant. Minimum Dropping Point: 374F. Type I | Silicone Grease | TU | 35 | 0 | — |
| GREASEAIRCRAFT | 36 | 25 | F16 GR GUN, CORROSION RESISTIVE AND LOW EVAPORATION AND OXIDATION RESISTANT AND WATER RESISTANT, 14.000 OUNCES, FLUID, 450.0 DEG FAHRENHEIT, -65.0/+350.0 DEG FAHRENHEIT | MIL-G-81827 | CA | 36 | 0 | — |
| GREASEAIRCRAFT | 37 | 120 | NATO G-395. Def Stan 91-52/1 Amd 1, XG-293. MIL-G-81322E. MIL-PRF-81322F. AIR 4222 Iss 1. Wide temperature range liquid lubricant, high melting point gelling agent and oxidation and corrosion inhibitors. Effective Temperature Rating: -55 to +175C. Minimum Dropping Point: 232C. Worked Penetration: 265 - 320 | Multi-Purpose Grease | CN | 37 | 0 | — |
| GREASEWIRE ROPEEX | 38 | 25 | MIL-PRF-18458. MIL-G-18458B Amd 4. Basic Ingredient: Petroleum oil and such soaps, asphalts, waxes, and other agents required to meet the specification. The grease shall not contain benzene, chlorinated compounds, or hydrolyzable chlorine derivatives. Worked Penetration: 200 – 350. Minimum Load Wear Index: 30. Maximum Volatile Matter: 2.0 %. Minimum Adhesiveness: 95%. | Open Gear and Wire Rope Grease (Solid) | CN | 38 | 0 | — |
| CLEANERLUBRICANT A | 39 | 120 | NATO S-758. MIL-PRF-63460D. DCSEA 501/A Iss. Minimum Flash Point: 150F. Maximum Pour Point: -75F. Effective Temperature Rating: -65 to +150F | Weapons Cleaner, Lubricant and Preservative | GL | 39 | 0 | — |
| LUBRICATING OILCOM | 40 | 120 | MIL-L-15019. ANSI/AGMA 9005-D94. Fatty Material: Acidless tallow oil. Basic Ingredient: Petroleum oil. Service Characteristics: Corrosion resistive. Viscosity: 414.0 cSt (Minimum) / 506.0 cSt (Maximum) @ 100F. Minimum Viscosity Index: 90. Maximum Pour Point: 20F. Minimum Flash Point: 475F. MS 6135 | Compounded Lubricating Oil | GL | 40 | 0 | — |
| LUBRICATING OILINS | 41 | 60 | NATO O-147. Def Stan 91-49/1, OX-14. MIL-PRF-6085D Amd 1. MIL-L-6085C. AIR 3511/A Iss 2. Synthetic oil w/ corrosion and oxidation inhibitors. Viscosity: 12.0 cSt (Minimum) @ 10C / 12000 cSt (Maximum) @ -54C. Minimum Flash Point: 165C. Maximum Pour Point: -57C. | Synthetic Instrument Oil | QT | 41 | 0 | — |
| GREASEAIRCRAFT AND | 42 | 55 | NATO G-354. Def Stan 91-53/2, XG-287. MIL-PRF-23827C. Air 4210/B Iss 3. Mineral or ester-type synthetic oil w/ gelling agent, anti-oxidant and anti-corrosion inhibitors, and extreme pressure additives. Minimum Dropping Point: 180C. NGLI 2. Worked Penetration: 265-295. Effective Temperature Rating: -73 to +121C. | Multi-Purpose, Low Temperature Grease | TU | 42 | 0 | — |
| LUBRICATING OILGEA | 43 | 50 | NATO O-228, 140-EP, OEP-220. MIL-L-PRF-2105E Grade 85W/ 140. DCSEA 220A Iss 2 Grade 85W/140. API GL-5. Mineral and/or synthetic hydrocarbon oils w/ additives. Viscosity: 24.0 – 41.0 cSt @ 100C / 150,000 cP (Maximum) @ -26. Minimum Flash Point: 180C. Effective Temperature Rating: -25 to +140C. API Service Classification: GL-5. Grade: 85W/140 | Extreme Pressure Gear Lube SAE 85W/140 | CN | 43 | 0 | — |
| LUBRICATING OILINS | 44 | 40 | NATO O-147. Def Stan 91-49/1, OX-14. MIL-PRF-6085D Amd 1. MIL-L-6085C. AIR 3511/A Iss 2. Synthetic oil w/ corrosion and oxidation inhibitors. Viscosity: 12.0 cSt (Minimum) @ 10C / 12000 cSt (Maximum) @ -54C. Minimum Flash Point: 165C. Maximum Pour Point: -57C. | Synthetic Instrument Oil | BT | 44 | 0 | — |
| GREASESILICONE INS | 45 | 25 | MIL-L-15719A, Amd 3. Polymethylthenyl silicone fluid-lithium soap. Oxidation and wear resistant. Low volatility. Corrosion resistive. Minimum Dropping Point: 375F. Effective Temperature Rating: 0 to +300F | Silicone Insulated Electric Motor Grease | CN | 45 | 0 | — |
| LUBRICANT | 46 | 60 | NATO S -1738. MIL-PRF-46010F Type III. SAE AS5272 Iss 1997 Type 1. ZX-34. MIL-L-46010E Type 1. Molybdenum Disulfide powder w/ resin binder dispersed in a solvent. Color: Black-Grey. Anti-wear and corrosion resistive. Curing Time: 60 Min @ 150C. Usable Service Temperature: -70 to 250C | Soft Film Lubricant, Hot Application | PT | 46 | 0 | — |
| LUBRICATING OILHEL | 47 | 230 | SYNTHETIC BASE,1.000 GALLONS, 13000.00 MAXIMUM -40 DEG FAHRENHEIT AND 25.00 MINIMUM 100 DEG FAHRENHEIT AND 5.00 MINIMUM 210 DEG FAHRENHEIT AND 5.50 MAXIMUM 210 DEG FAHRENHEIT, -65.0 DEG FAHRENHEIT, -40.0/+275.0 DEG FAHRENHEIT, 475.0 DEG FAHRENHEIT CLEVELAND OPEN CUP | DOD-L-85734 | CN | 47 | 0 | — |
| LUBRICATING OILVAC | 48 | 50 | MIL-L-83767B Amd 2. Fatty Material: Any acceptable. Basic Ingredient: Additives and petroleum oil. Lubricant Type: Any acceptable. Service Characteristics: Anti-foam and corrosion resistive. Minimum Viscosity Index: 90. Viscosity: 60.0 cSt (Minimum) / 85.0 cSt (Maximum) @ 104F. Maximum Pour Point: 10F. Minimum Flash Point: 430F. Type II | General Purpose Lubricating Oil | QT | 48 | 0 | — |
| ADDITIVECOOLANT | 49 | 120 | SPECIFICATION NOT AVAILABLE | EA | 49 | 0 | — | |
| PACKINGGREASE | 50 | 120 | SPECIFICATION NOT AVAILABLE | EA | 50 | 0 | — | |
| PACKINGGREASE | 51 | 2 | SPECIFICATION NOT AVAILABLE | MR | 51 | 0 | — | |
| GREASE PACKING | 52 | 2 | SPECIFICATION NOT AVAILABLE | MR | 52 | 0 | — | |
| GREASE PACKING5 8 | 53 | 5 | SPECIFICATION NOT AVAILABLE | MR | 53 | 0 | — | |
| PACKINGGREASE | 54 | 2 | SPECIFICATION NOT AVAILABLE | EA | 54 | 0 | — | |
| GEAR OIL | 55 | 1500 | NATO O-226. Def Stan 91-59/2, OEP-220. MIL-L-PRF-2105E Grade 80W/90. DCSEA 220A Iss 2 Grade 80W/90. API GL-5. Mineral oil with extreme pressure additives and a technically acceptable pour point depressant. Viscosity: 13.5 – 24.0 cSt @ 100C. Minimum Flash Point: 165C. Minimum Viscosity Index: 90. Effective Temperature Rating: -15 to +130C | Extreme Pressure Gear Lube SAE 80W90 | CN | 55 | 0 | — |
| OILGEAR BOX | 56 | 900 | FOR VFPB YAMAHA 250HP | EA | 56 | 0 | — | |
| BRAKE CLEANER 5L | 57 | 400 | MTN: 2020-0263 PARTS OF S-100 CON CAMCOPTER (UAV) | EA | 57 | 0 | — | |
| OILCOMPRESSOR COOL | 58 | 60 | ULTRA COOLANT;PG:2574;IT:5HYK0;SAE:10W-20;GRDE:100 | CN | 58 | 0 | — | |
| GREASELITHCOMP EP | 59 | 150 | 300.0 DEG FAHRENHEIT, | CN | 59 | 0 | — | |
| GREASEBALL AND ROL | 60 | 60 | DOD-G-24508A Amd 3. Basic Ingredient: Any acceptable. Water and wear resistant. Maximum Operating Temperature: 300F. Minimum Dropping Point: 450F. Worked Penetration: 265 – 320. Contains no silicone. | High Performance, Multi-Purpose Bearing Grease | LB | 60 | 0 | — |
| GREASEBALL AND ROL | 61 | 20 | DOD-G-24508A Amd 3. Basic Ingredient: Any acceptable. Water and wear resistant. Maximum Operating Temperature: 300F. Minimum Dropping Point: 450F. Worked Penetration: 265 – 320. Contains no silicone. | CN | 61 | 0 | — | |
| ANTIFREEZECOOLANT | 62 | 55 | Approximate Glycol Concentration: 100%. Specific Gravity @ 15C: 1.116. Freezing Point: -13C. Equilibrium Boiling Point: 196C | Ethylene Glycol, Inhibited, Heavy Duty, Non-Arctic | DR | 62 | 0 | — |
| LUBRICATING OILSTE | 63 | 40 | NATO O-249. STM 7240/B Iss 3. Basic Ingredient: Additives and mineral oil. Viscosity: 1500 cSt (Maximum) @ 0C / 8 cSt (Minimum) @ 100C. Minimum Viscosity Index: 95. Maximum Pour Point: -9C. Minimum Flash Point: 180C. Effective Temperature Rating: 0-120C. ISO VG 68. | Lubricating Oil, Steam Turbine and Gear | DR | 63 | 0 | — |
| FLUSHING OIL | 64 | 40 | OM-24. BS4475: 2000 Grade CS-22: Refined mineral oil w/ pour point depressant. Viscosity: 19.8 - 24.2 cSt @ 40C. Minimum Viscosity Index: 90. Maximum Pour Point: -9C. Minimum Flash Point: 165C | Flushing Oil – ISO VG 22 | BX | 64 | 0 | — |
| FLUSHING OIL | 65 | 25 | OM-24. BS4475: 2000 Grade CS-22: Refined mineral oil w/ pour point depressant. Viscosity: 19.8 - 24.2 cSt @ 40C. Minimum Viscosity Index: 90. Maximum Pour Point: -9C. Minimum Flash Point: 165C | Flushing Oil – ISO VG 22 | DR | 65 | 0 | — |
| HYDRAULICOILVH 32 | 66 | 35 | NATO H-576. Def Stan 91-39/3, OM-33. MIL-H-17672D Amd 2 Grade 2075 TH. STM 7220/B Amd TH1 Low Viscosity Index. MS 2075-T-H. Basic Ingredient: Mineral oil w/ possible anti-oxidation, anti-corrosion, and anti-wear additives. Use of additives containing metals is prohibited. Viscosity: 28.8 – 35.2 cSt @ 40C / 500 cSt (Maximum) @ 0C. Minimum Flash Point: 160C. Maximum Pour Point: -30C. ISO VG 32 | DR | 66 | 0 | — | |
| HYDRAULIC FLUIDPET | 67 | 4 | ADDITIVES AND PETROLEUM BASE, CORROSION RESISTIVE AND OXIDATION RESISTANT, 55.000 GALLONS, 4.20 MINIMUM 210 DEG FAHRENHEIT AND 5.20 MAXIMUM 210 DEG FAHRENHEIT AND 1200.00 MAXIMUM 0 DEG FAHRENHEIT, -20.0 DEG FAHRENHEIT, 315.0 DEG FAHRENHEIT CLEVELAND OPEN CUP, ISO VISCOSITY GRADE 32, MILITARY 2075-T-H SYMBOL | DR | 67 | 0 | — | |
| LUBRICATING OILENG | 68 | 100 | MIL-PRF-2104G, MIL-L-2104F, SAE J2362. Basic Ingredient: Any acceptable. Anti-wear, anti-foam, and corrosion resistive. Minimum Viscosity Index: 80. Viscosity: 12.9 -16.8 cSt @ 210F. Maximum Pour Point: 5F. Minimum Flash Point: 435F. Minimum API Performance: SJ. Grade 40 | Spark and Compression Ignition Engine Oil, Grade 40 | DR | 68 | 0 | — |
| LUBRICATING OILENG | 69 | 5 | MIL-PRF-2104G, MIL-L-2104F, SAE J2362. Basic Ingredient: Any acceptable. Anti-wear, anti-foam, and corrosion resistive. Minimum Viscosity Index: 80. Viscosity: 12.9 -16.8 cSt @ 210F. Maximum Pour Point: 5F. Minimum Flash Point: 435F. Minimum API Performance: SJ. Grade 40 | DR | 69 | 0 | — | |
| DIESEL ENGINEOIL | 70 | 200 | TOOLS & EQPT MISC. FOR MODEL 3512B (CATERPILLAR) | GL | 70 | 0 | — | |
| LUBRICATING OILOIL | 71 | 40 | DIESEL ENG.OILS;PG:27;SAE GRD:15W-40;EF BMR MAINTE | DR | 71 | 0 | — | |
| LUBRICATING OILOIL | 72 | 200 | DIESEL ENG.OILS;PG:27;SAE GRD:15W-40;EF BMR MAINTE | CN | 72 | 0 | — | |
| LUBRICATING OILENG | 73 | 1350 | MIL-PRF-9000, MIL-L-9000H MS 9250. Basic Ingredient: Additives and petroleum oil. Foam and salt water-resistant. No carcinogenic or potentially carcinogenic components are allowed. Viscosity: 11.9 – 14.5 cSt @ 210F. Maximum Pour Point: -10F. Minimum Flash Point: 390F. Grade 9250, Type 1 | Diesel Engine Oil, MS 9250 | DR | 73 | 0 | — |
| LUBRICATING OILENG | 74 | 5 | MIL-PRF-9000, MIL-L-9000H MS 9250. Basic Ingredient: Additives and petroleum oil. Anti-foam and water-resistant. Viscosity: 11.9 -14.5 cSt @ 210F. Maximum Pour Point: 10F. Minimum Flash Point: 390F. Grade 9250, Type 1. | DR | 74 | 0 | — | |
| LUBRICATING OILENG | 75 | 5 | MIL-PRF-9000, MIL-L-9000H MS 9250. Basic Ingredient: Additives and petroleum oil. Anti-foam and water-resistant. Viscosity: 11.9 -14.5 cSt @ 210F. Maximum Pour Point: 10F. Minimum Flash Point: 390F. Grade 9250, Type 1. | EA | 75 | 0 | — | |
| MC30OIL | 76 | 10 | MIL-PRF-9000, MIL-L-9000H MS 9250. Basic Ingredient: Additives and petroleum oil. Anti-foam and water-resistant. Viscosity: 11.9 -14.5 cSt @ 210F. Maximum Pour Point: 10F. Minimum Flash Point: 390F. Grade 9250, Type 1. | EA | 76 | 0 | — | |
| HYDRAULIC OIL | 77 | 220 | NATO H-574, XH-46. DCSEA 400/B. Base Ingredient: Mineral oil w/ oxidation, corrosion, and wear resistant inhibitors. ISO VG: 46. Viscosity: 41.4 –50.6 cSt @ 40C / 7.3 cSt (nominal) @ 100C. Maximum Pour Point: -36C. Minimum Flash Point: 180C. | Hydraulic Fluid, ISO VG 46 | DR | 77 | 0 | — |
| LUBE OILGEAR | 78 | 220 | SPECIFICATION NOT AVAILABLE | DR | 78 | 0 | — | |
| LUBE OILGEAR | 79 | 2 | SPECIFICATION NOT AVAILABLE | DR | 79 | 0 | — | |
| ENGINE OIL | 80 | 20 | ELF OIL TECNIC SUPER 15W/40. Basic Ingredient: Refined mineral oil w/ multi-functional additives. Appearance: Amber/brown liquid. Minimum Flash Point: 150C. Boiling Point: > 200C. Auto-Flammability Temperature: >200C. Minimum API Performance: CF-4 | Spark and Compression Ignition Gasoline Engine Oil, SAE 15W/40 | CO | 80 | 0 | — |
| LAMPRED | 81 | 40 | FACILITY 6 SPCLZD WRKSHP SPARES PKG | EA | 81 | 0 | — | |
| HYDRAULIC AND LUBRI | 82 | 25 | NATO H-576. Def Stan 91-39/3, OM-33. MIL-H-17672D Amd 2 Grade 2075 TH. STM 7220/B Amd TH1 Low Viscosity Index. MS 2075-T-H. Basic Ingredient: Mineral oil w/ possible anti-oxidation, anti-corrosion, and anti-wear additives. Use of additives containing metals is prohibited. Viscosity: 28.8 – 35.2 cSt @ 40C / 500 cSt (Maximum) @ 0C. Minimum Flash Point: 160C. Maximum Pour Point: -30C. ISO VG 32 | TH1-Type/ Anti-Wear Hydraulic Fluid, ISO VG 32 | DR | 82 | 0 | — |
| LUBRICATING OILEX | 83 | 40 | NATO O-226. Def Stan 91-59/2, OEP-220. MIL-L-PRF-2105E Grade 80W/90. DCSEA 220A Iss 2 Grade 80W/90. API GL-5. Mineral oil with extreme pressure additives and a technically acceptable pour point depressant. Viscosity: 13.5 – 24.0 cSt @ 100C. Minimum Flash Point: 165C. Minimum Viscosity Index: 90. Effective Temperature Rating: -15 to +130C | Extreme Pressure Gear Lube SAE 80W90 | DR | 83 | 0 | — |
| LUBRICATING OILGE | 84 | 25 | Def Stan 91-71/2. OX-165. Polyalkylene glycol w/ additives. Viscosity: 20.0 - 25.0 cSt @ 100C. Minimum Viscosity Index: 160. Minimum Flash Point: 255C. Effective Temperature Rating: -40 to +150C. | Synthetic Gear Oil | CO | 84 | 0 | — |
| LUBRICATING OILMI | 85 | 30 | LUBRICATING OIL MINERAL, OX-24,AY1 7008 12/10/2006 | CO | 85 | 0 | — | |
| LUBRICATING OILMI | 86 | 25 | MIL-PRF-9000, MIL-L-9000H MS 9250, NATO O-278, MC-30, Def Stan 91-22/4, OMD-113, STM 7251/A Iss 2 Amd 2. Mineral oil w/ additives as necessary to meet the specified requirements. No carcinogenic or potentially carcinogenic components are allowed. Viscosity: 12.5 – 16.3 cSt @ 100C / 3300 cSt (Maximum) @ 0C. Maximum Pour Point: -15C. Minimum Flash Point: 180C. Typical Total Base Number: 10 mg KOH/g. SAE Grade: 40. Minimum ACEA Performance: E2. Minimum API Performance: CF. | Diesel Engine Oil, Grade 40 | DR | 86 | 0 | — |
| LUBRICATION OILMI | 87 | 35 | NATO O-285. BS 2626 1992 Type A, Grade 68. OM-70. Highly refined, neutral, moisture –free oil, with or without additives. Basic Ingredient: Refined mineral oil. Viscosity: 61.2 - 74.8 cSt @ 40C. Maximum Pour Point: -24C. Minimum Flash Point: 171C. | Mineral or Synthetic , PAO-Based Oil for R-11/ R-12 Refrigerant Compressors – VG 68 | PK | 87 | 0 | — |
| OILCORROSION PREV | 88 | 25 | ENTATIVE. PX-13 (25 LITRES) | EA | 88 | 0 | — | |
| OILCOMPRESSOR | 89 | 25 | NATO OX-95. Synthetic oil w/ additives. Viscosity: 95 cSt @ 40c / 20000 cSt @ -18C. Maximum Pour Point: -30C. Minimum Flash Point: 266C | CO | 89 | 0 | — | |
| OILLUBRICATING | 90 | 35 | NATO OX-95. Synthetic oil w/ additives. Viscosity: 95 cSt @ 40c / 20000 cSt @ -18C. Maximum Pour Point: -30C. Minimum Flash Point: 266C | CN | 90 | 0 | — | |
| LUBRICATING OILOM | 91 | 25 | NATO OM-58. Def Stan 91-42/2. Mineral oil that may contain a technically acceptable pour point depressant. Viscosity: 61.2 - 74.8 cSt @ 40C. Minimum Viscosity Index: 75. Maximum Pour Point: -18C. Minimum Flash Point: 177C | Lubricating Oil. Petroleum: Compressor Light | CN | 91 | 0 | — |
| OILUBRICATING | 92 | 30 | MOBILGEAR 600 XP 220 (20 LITRE) | DR | 92 | 0 | — | |
| OILLUB MOBILGEAR | 93 | 30 | AGMA 9005-D94 - 7EP, DIN 51517 Part 3 CLP 460, ISO 12925-1 Type CKD 460. High quality mineral oils w/ sulfur / phosphorus extreme pressure additives. ISO Viscosity Grade: 460. Viscosity: 460 cSt @ 40C / 29.9 cSt @ 100C. Minimum Viscosity Index: 96. Maximum Pour Point: -12C. Minimum Flash Point: 275C. Timken OK Load: 65 Lbs. | DR | 93 | 0 | — | |
| OILESSO SPARTAN EP | 94 | 50 | AGMA 9005-D94 - 7EP, DIN 51517 Part 3 CLP 460, ISO 12925-1 Type CKC 460. High quality mineral oils w/ sulfur / phosphorus extreme pressure additives. ISO Viscosity Grade: 460. Viscosity: 460 cSt @ 40C / 29.9 cSt @ 100C. Minimum Viscosity Index: 96. Maximum Pour Point: -12C. Minimum Flash Point: 275C. Timken OK Load: 65 Lbs. | Gear Lube ISO VG 460 | CN | 94 | 0 | — |
| OILISO 460 | 95 | 8 | AGMA 9005-D94 - 7EP, DIN 51517 Part 3 CLP 460, ISO 12925-1 Type CKD 460. High quality mineral oils w/ sulfur / phosphorus extreme pressure additives. ISO Viscosity Grade: 460. Viscosity: 460 cSt @ 40C / 29.9 cSt @ 100C. Minimum Viscosity Index: 96. Maximum Pour Point: -12C. Minimum Flash Point: 275C. Timken OK Load: 65 Lbs. | CO | 95 | 0 | — | |
| OILLUBRICATING | 96 | 35 | MOBILGEAR 600 XP 220 (208 LITRE) | DR | 96 | 0 | — | |
| OILTELLUST46 20 | 97 | 20 | DENSION HF-0. VICKERS M-2950-S (Mobile) / I-286-S (Industrial) / SUNSTRAND. CINCINNATI MACHINE P-70. A non-corrosive mineral or synthetic oil w/ special oxidation resistant and rust-inhibiting additives. Viscosity: 48 -52 cSt @ 100F. Minimum Viscosity Index: 9.15. Maximum Pour Point: 10F. | Hydraulic Lubricating Oil | CN | 97 | 0 | — |
| OILOX38 IN1GALLO | 98 | 80 | NATO O-149. Def Stan 91-98/2. (DERD 2487) OX-38. Synthetic based oil w/ additives and inhibitors required to meet the specification. Viscosity: 7.35 cSt (Minimum) @ 100C / 36 cSt (Maximum) @ 40C / 13000 cSt (Maximum) @ -40C. Minimum Flash Point: 216C. Maximum Pour Point: -54C. Not for use w/ natural, silicone, or Neoprene elastomers. | Synthetic Turbine Oil, 7.5 cSt | CN | 98 | 0 | — |
| ENGINE OIL5L | 99 | 20 | SPECIFICATION NOT AVAILABLE | CN | 99 | 0 | — | |
| ENGINEOIL20L | 100 | 20 | SPECIFICATION NOT AVAILABLE | DR | 100 | 0 | — | |
| ENGINE CLEANER | 101 | 25 | MERCURY MARINE QUICKSILVER ENGINE CLEANER. Basic Ingredients: Petroleum distillates (37%), 2-Butoxyethanol (21%), Refined Petroleum (7%), Propane (6%), and Isobutane (2%). Highly Flammable. Minimum Flash Point: -156F. No other information found. | Outboard Marine Engine Cleaner – Aerosol | CN | 101 | 0 | — |
| GREASEZX13ANTIS | 102 | 70 | 0 | CN | 102 | 0 | — | |
| GREASEAUTOMOTIVE | 103 | 25 | NATO G-403. Def Stan 91-27/2, XG-279. MIL-G-10924F Amd 1. MIL-PRF-10924G. Mineral oil or synthetically prepared oil w/ gelling agent. Oxidation, water, and salt water-resistant. Corrosion resistive. Minimum Dropping Point: 130C. NGLI 2. Worked Penetration: 265 – 295. Effective Temperature Rating: -54 to +105C. | Automotive and Artillery Grease | CN | 103 | 0 | — |
| GREASE | 104 | 25 | NATO G-460. Def Stan 91-34/2, XG-286. STM 7420/B Iss 3 Amd 2. A-A-50433. Lubricating oil and water resistant soaps. Salt water-resistant and oxidation resistant. Corrosion and ant-wear resistive. Minimum Dropping Point: 130C. NGLI 2. Worked Penetration: 265-295 | Lime-Based Grease / Replaced by Sea Water Resistant Grease | PK | 104 | 0 | — |
| GREASE ENLUBE CCL2 | 105 | 30 | Petroleum and mineral oils w/ gelling agent and solvents. Color: Tan. Odor: Bland. Specific Gravity @ 60F: 1.02. Insoluble in water. Minimum Flash Point: 374F | Petroleum Hydrocarbon Grease | CN | 105 | 0 | — |
| GREASEGENERAL PUR | 106 | 30 | NATO G-421. Def Stan 91-105/1, XG-291. Mineral oil and/or synthetic hydrocarbon oil poly alphaolefin (PAO) w/ gelling agent and additives. Minimum Dropping Point: 230C. NGLI 2. Penetration: 265 - 295. Effective Temperature Rating: -30 to +150C | Multipurpose, Heavy Duty Grease | CO | 106 | 0 | — |
| GREASEGRAPHITE | 107 | 40 | SHELL ALVANIA HDX2. High viscosity index mineral oil-lithium/ calcium thickener and anti-oxidation, anti-wear, anti-corrosion, and adhesion additives. Extreme pressure properties provided by molybdenum disulfide. Color: Dark grey. Base oil: Mineral. Viscosity of Base Oil: 160 cSt @ 40C / 15.5 cSt @ 100C. Minimum Dropping Point: 184C. Effective Temperature Range: -10 to +140C. NGLI 2. Worked Penetration: 265 – 295. | High Performance Grease | CN | 107 | 0 | — |
| GREASE LITHIUM | 108 | 40 | PN: WMEL 189011250. DIN 51825. Unable to identify. Part Number does come up as a lubricant. | Unknown | EA | 108 | 0 | — |
| GREASELOW TEMPERA | 109 | 25 | Homogenous grey grease specially designed as an assembly lubricant. For use in oxygen, bromine, and chlorine environments, both liquid and gaseous. Base Ingredient: Perfluoropolyether w/ hydrous magnesium silicate thickener. Viscosity of Base Fluid: 250 cSt @ 20C. NGLI: 1/2. Specific Gravity: 1.9. Effective Temperature Rating: -40 to 220C. Soluble in fluorinated solvents. | Multi-Purpose, Low Temperature Grease | TU | 109 | 0 | — |
| GREASEPNEUMATIC | 110 | 25 | NATO G-392. MIL-G-4343C. SAE-AMS-G-4343, XG-269. Silicone-based synthetic oil w/ gelling agent. Minimum Dropping Point: 163C. Worked Penetration: 260-300. Effective Temperature Rating: -55 to +95C | Synthetic, Pneumatic Systems Grease. Contains Silicone | CO | 110 | 0 | — |
| GREASESYNTHETIC | 111 | 30 | AFS 900C. MIL-L-15719A, XG-261. Silicone fluid w/ gelling agent. Worked Penetration: 240 - 280. Minimum Dropping Point: 280C. Effective Temperature Rating: 0 to +300F. | Silicone Insulated Electric Motor Grease | TU | 111 | 0 | — |
| GREASESILICONEX | 112 | 70 | Silicone Insulated Electric Motor Grease | TU | 112 | 0 | — | |
| GREASESPECIAL PUR | 113 | 70 | NATO G-460. Def Stan 91-34/2, XG-286. STM 7420/B Iss 3 Amd 2. A-A-50433. Lubricating oil and water resistant soaps. Salt water-resistant and oxidation resistant. Corrosion and ant-wear resistive. Minimum Dropping Point: 130C. NGLI 2. Worked Penetration: 265-295 | Sea Water Wash Resistant Grease | PK | 113 | 0 | — |
| SEPARATOR SERVICE | 114 | 25 | SPECIFICATION NOT AVAILABLE | KT | 114 | 0 | — | |
| GREASETEFLON50G | 115 | 25 | FLUORTEK TP55. Basic Ingredient: Polydimetylsiloxan oil and Polytetrafluorethylene (Teflon). Color: White. Minimum Dropping Point: 260C. NGLI 2. Worked Penetration 265 – 295. Effective Temperature Rating: -40 to +230C. Decomposition Temperature: > 290C. Median Particle Size: 5-6 Microns. | Silicone Based Lubricant w/ Teflon | CO | 115 | 0 | — |
| HYDRAULIC FLUIDNO | 116 | 25 | Def Stan 91-110/1, OX-40. Water, Polyglycol polymers w/ additives. Color: Fluorescent Green. Viscosity: 41.4 - 50.6 cSt @ 40C / 350 cSt (Maximum) @ 0C. Maximum Pour Point: -39C. pH: 7.5 -10.0. Water Content: 35-45 % Volume | Aqueous Polyglycol Based Hydraulic Fluid, Fire Resistant | DR | 116 | 0 | — |
| LUBRICATING OILENG | 117 | 60 | 0 | DR | 117 | 0 | — | |
| CHMTYPE HYDRAULIC | 118 | 25 | SAWARI 2. NATO CHM. STM 7223. Petroleum base stock w/ additives. Viscosity: 32.0 cSt (Nominal) @ 40C / 8.55 cSt (Nominal) @ 100C. Minimum Flash Point: 153C. Maximum Pour Point: -34C. Auto-Flammability Temperature: > 250C. Minimum Viscosity Index: 262 | Automatic Transmission Hydraulic Fluid, ISO VG 32 | EA | 118 | 0 | — |
| HYDRAULIC FLUID | 119 | 45 | 1 LI CANX24;REF:PETROMIN QUOTATION,DTD:28/11/1428 | CN | 119 | 0 | — | |
| HYDRAULIC FLUIDAU | 120 | 5 | NATO H-548, XH-36. STANAG 7093, OX-75. DCSEA 403/A Iss 1. Color: Red. Anti-wear and oxidation resistant. Corrosion Resistive. Viscosity: 32 cSt (Nominal) @ 40C / 7 cSt @ (Nominal) @ 100C. Minimum Flash Point: 196C. Maximum Pour Point: -42C. ISO VG 32 | DR | 120 | 0 | — | |
| HYRAULIC OIL | 121 | 5 | NATO H-548, XH-36. STANAG 7093, OX-75. DCSEA 403/A Iss 1. Color: Red. Anti-wear and oxidation resistant. Corrosion Resistive. Viscosity: 32 cSt (Nominal) @ 40C / 7 cSt @ (Nominal) @ 100C. Minimum Flash Point: 196C. Maximum Pour Point: -42C. ISO VG 32 | BX | 121 | 0 | — | |
| LUBRICATING OILENG | 122 | 200 | ULTRA 7 20W50;PETROMIN LTR PL/WR/0249/2007,18/9/07 | CN | 122 | 0 | — | |
| YAMALUBE OIL 4TOB | 123 | 1200 | F/OUTB MTR MDL:250HP;CDR SSFU LTR188179,26/6/1434 | EA | 123 | 0 | — | |
| LUBRICATING OILENG | 124 | 1200 | PETROMIN SUPER SYNTHETIC GF4,5 LI/CN,SAE 10W-40 | CN | 124 | 0 | — | |
| LUBRICATING OILENG | 125 | 120 | REF:PETROMIN PRODUCT GUIDE CAT 2019,PG1-10 | DR | 125 | 0 | — | |
| LUBRICATING OILENG | 126 | 220 | PETROMIN PROD,API CH-4;RDC LTR448595,18/7/1440 | DR | 126 | 0 | — | |
| LUBRICATING OILENG | 127 | 120 | PETROMIN DSL ENG OIL,SUPER HD 40 20W-40 API CH-4 | DR | 127 | 0 | — | |
| LUBRICATING OILENG | 128 | 5 | LUBRICATING OIL,ENGINE;VISCOSITY@210DEG F : 12.90 CST MIN AND 16.8 MAX, VISCOSITY INDEX : 80 , POUR POINT : 5 DEG F, FLASH POINT : 435 DEG F, CD 40 GRADE. | MIL-PRF-2104 MIL -L-2104 | DR | 128 | 0 | — |
| LUBRICATING OILAIR | 129 | 8 | MIL-L-22851D Amd 1. NATO O-123 (Deleted), OMD-160, SAE J1899 Grade 40, Rev ‘00’. Mineral oil, which shall contain approved ashless dispersant additives and may contain an approved pour point depressant, VI improvers, anti-foam agents, and anti-oxidants. Viscosity: 12.5-16.5 cSt @ 100C. Maximum Pour Point: -15C. Minimum Flash Point: 225C. Maximum Percent Ash: 0.011 | DR | 129 | 0 | — | |
| LUBRICATING OILENG | 130 | 2 | MIL-L-22851D Amd 1. NATO O-123 (Deleted), OMD-160, SAE J1899 Grade 40, Rev ‘00’. Mineral oil, which shall contain approved ashless dispersant additives and may contain an approved pour point depressant, VI improvers, anti-foam agents, and anti-oxidants. Viscosity: 12.5-16.5 cSt @ 100C. Maximum Pour Point: -15C. Minimum Flash Point: 225C. Maximum Percent Ash: 0.011 | DR | 130 | 0 | — | |
| LUBRICATING OILENG | 131 | 30 | MIL-L-22851D Amd 1. NATO O-123 (Deleted), OMD-160, SAE J1899 Grade 40, Rev ‘00’. Mineral oil, which shall contain approved ashless dispersant additives and may contain an approved pour point depressant, VI improvers, anti-foam agents, and anti-oxidants. Viscosity: 12.5-16.5 cSt @ 100C. Maximum Pour Point: -15C. Minimum Flash Point: 225C. Maximum Percent Ash: 0.011 | DR | 131 | 0 | — | |
| LUB OILENGINE | 132 | 55 | PETRMIN,SAE GRADE:15W-40,FOR JANA AND JURAYD USE | DR | 132 | 0 | — | |
| LUBRICATING OILGEA | 133 | 30 | PETROMIN OIL LTR REF:PL/WR/0212/2006,DTD:22APR2006 | DR | 133 | 0 | — | |
| BRAKE FLUIDAUTO | 134 | 95 | SUPER BRAKE FLUID, U/I CONTAINS 24 CANS X 250 ML | CS | 134 | 0 | — | |
| BRAKE FLUIDAUTOMOT | 135 | 40 | 1.000 PINTS, 1.50 MINIMUM 210 DEG FAHRENHEIT AND 900.00 MAXIMUM NEG 31 DEG FAHRENHEIT AND 3.50 MINIMUM 122 DEG FAHRENHEIT, 179.6 DEG FAHRENHEIT CLEVELAND OPEN CUP, BOILING POINT MANIMUM 401 DEG FAHRENHEIT, 1 SIZE | PT | 135 | 0 | — | |
| BATTERY WATER | 136 | 1200 | DISTILLED WATER FOR LEAD ACID STORAGE BATTERY32403 | BT | 136 | 0 | — | |
| GREASEGENERAL PURP | 137 | 150 | DOD-G-24508A. Gelling agent and lubricating oil. High temperature and wear resistant. Maximum Operating Temperature: 300F. Water and Wear Resistant. Minimum Dropping Point: 450F. Worked Penetration: 265 – 320. No Silicones | General Purpose Grease | CN | 137 | 0 | — |
| GREASEGEN PURPOSE | 138 | 20 | DOD-G-24508A. Gelling agent and lubricating oil. High temperature and wear resistant. Maximum Operating Temperature: 300F. Water and Wear Resistant. Minimum Dropping Point: 450F. Worked Penetration: 265 – 320. No Silicones | General Purpose Grease | CN | 138 | 0 | — |
| ANTIFREEZE COOLAN | 139 | 35 | Approximate Glycol Concentration: 40%. Specific Gravity @ 15C: 1.055. Freezing Point: -25C. Equilibrium Boiling Point: 105C. FSC is incorrect – should be 6850 vice 9150. | PETROMIN Gasoline and Diesel Engine Anti-Freeze | DR | 139 | 0 | — |
| CLEANING COMPOUND | 140 | 130 | MIL-C-85570B Amd 1. MIL-PRF-85570. A compound for use in a solution of water for cleaning and washing of painted or unpainted aircraft surfaces. Composition: Water, alkaline salts, biodegradable surface agents, soap, and alcohol. Application Method: Any acceptable. Minimum Biodegradable Content: 90.0%. Yellow, inflammable liquid. Density: 1.045 @ 20C. Boiling temperature: 100C | Aircraft Surface Cleaning Compound | CN | 140 | 0 | — |
| GREASEAIRCRAFT | 141 | 70 | SAWARI 2. NATO G-359. MIL-G-3545C Amd 1 (MR). Air 4210/B Iss 3. Mineral oil w/ gelling agent. Oxidation resistant. Minimum Dropping Point: 177C. Worked Penetration: 250 - 300. Effective Temperature Rating: -18 to 149C | High Temperature Grease | EA | 1 | 0 | — |
| GREASEVERY HIGH P | 142 | 50 | SAWARI 2. NATO G-354. Def Stan 91-53/2, XG-287. MIL-PRF-23827C. Air 4210/B Iss 3. Mineral or ester-type synthetic oil w/ gelling agent, anti-oxidant and anti-corrosion inhibitors, and extreme pressure additives. Minimum Dropping Point: 180C. NGLI 2. Worked Penetration: 265-295. Effective Temperature Rating: -73 to +121C. | Multi-Purpose, Low Temperature Grease | EA | 2 | 0 | — |
| PETROLATUMTECHNICA | 143 | 40 | NATO S-743. Def Stan 91-38/1, PX-7. VV-P-236A Amd 2. AIR 3565/A Iss 2. Very highly refined mineral oils and hydrocarbon waxes. Insoluble in water. Soluble in solvents. Approximate Dropping Point: 47C. Minimum Melting Point: 40C. Minimum Flash Point: 205C. Worked Penetration: 230 – 275. | White Petroleum Jelly / Technical Petrolatum | CN | 3 | 0 | — |
| GREASEGRAPHITE | 144 | 70 | NATO G-355. Def Stan 91-54/1, XG-285. MIL-G-7187 Amd 1. AIR 4206/B Iss 3. Mineral oil w/ gelling agent and 5 % graphite powder. Minimum Dropping Point: 150C. Worked Penetration: 265-340. Effective Temperature Rating: -40 to +121C | Graphite Grease | EA | 4 | 0 | — |
| GREASEBALL AND ROL | 145 | 70 | NATO G-361. MIL-G-25760A (ASG) Amd 3. Air 4207/A Iss 2. Mineral oil w/ gelling agent. Low evaporation, extreme pressure, and corrosion resistive. Effective Temperature Rating: -40C to +177C. Maximum Operating Temperature: 177C. Minimum Dropping Point: 260C. | Synthetic, Wide Temperature Range Grease | TU | 5 | 0 | — |
| GREASEAIRCRAFT | 146 | 60 | NATO G-382. Def Stan 91-12/1, XG-271. MIL-G-7711A Amd 1. Air 4215/B Iss 3. Mineral oil and a gelling agent. Minimum Dropping Point: 149C. Effective Temperature Rating: -40 to +121C. Worked Penetration: 265 -340 | General Purpose Grease | EA | 6 | 0 | — |
| GREASEMOLYBDENUMD | 147 | 40 | NATO G-353. Def Stan 91-57/2, XG-276. MIL-G-21164D. AIR 4217/A Iss 2. Appearance: Black homogenous paste consisting of approximately 95 percent multi-purpose, low temperature grease and 5 percent powdered Molybdenum Disulfide. Minimum Dropping Temperature: 329F. Effective Temperature Rating: -100 to +250F. NGLI 2. Worked Penetration: 265 - 295 | Synthetic Grease w/ Molybdenum Disulfide | CN | 7 | 0 | — |
| GREASEAIRCRAFT AND | 148 | 25 | NATO G-354. Def Stan 91-53/2, XG-287. MIL-PRF-23827C. Air 4210/B Iss 3. Mineral or ester-type synthetic oil w/ gelling agent, anti-oxidant and anti-corrosion inhibitors, and extreme pressure additives. Minimum Dropping Point: 180C. NGLI 2. Worked Penetration: 265-295. Effective Temperature Rating: -73 to +121C. | Multi-Purpose, Low Temperature Grease | CN | 8 | 0 | — |
| GREASEGRAPHITE | 149 | 25 | SAWARI 2. NATO S-720. Def Stan 80-80/2. ZX-13. SAE AMS-2518A. MIL-PRF-5544D. Air 4247/A Iss 2. Basic Ingredient: Graphite (52%). Service Characteristics: Non-Slick and High Temperature. Maximum Operating Temperature: 500C. Auto-flammability Temperature: > 300C. Minimum Dropping Point: 100C. Worked Penetration: 170 -260. NOT FOR USE ON OXYGEN SYSTEMS. | Graphite Vaseline | CN | 9 | 0 | — |
| GREASEAIRCRAFT | 150 | 60 | NATO G-366. Def Stan 91-54/1, XG-284. MIL-G-25537C Amd 1. Low temperature liquid lubricant w/ gelling agent. Minimum Dropping Point: 138C. Worked Penetration: 265-305. Effective Temperature Rating: -55 to +75C. | Oscillating Bearing Grease | KG | 10 | 0 | — |
| GREASEAIRCRAFT | 151 | 35 | 0 | CN | 1 | 0 | — | |
| GREASEAIRCRAFT | 152 | 130 | 0 | KG | 2 | 0 | — | |
| GREASEGENERAL PURPOSE | 153 | 40 | MULTIPURPOSE,FOR BALL/ROLLER BEARING , CORROSION AND WATER RESIST, OPERATING TEMP RANGE : 32 TO 225 F, DROPPING POINT : 300 DEG F. QTY : 1 KG/CN | MIL-G24139 MIL-PRF-24139 | CN | 3 | 0 | — |
| GREASE | 154 | 25 | LUBRICANT FOR RUNNING ROPE&EXPOSE GEAR, CORROSION AND SALT WATER RESIST, LOW EVAPORATION, DROPPING POINT : 150 DEG F, UNIT QTY : 35 LB/CN. | MIL-G-18458 MIL-PRF-18458 | CN | 4 | 0 | — |
| LUBRICATING OILGEAR | 155 | 35 | GEAR OIL; VISCOSITY @ 212DEG F : 4.1cSt(MIN); FLASH POIINT : 150 DEG C , CLASS GL - 5, 75W GRADE. | MIL-L-2105 | QT | 5 | 0 | — |
| LUBRICATING OILGEAR | 156 | 25 | GEAR OIL; VISCOSITY@212DEG F: 13.5cSt(MIN);FLASH POINT : 165 DEG C, GRADE 80W/90. | MIL-L-2105 | CN | 6 | 0 | — |
| LUBRICATING OILREFRIGERANT COMPRESSOR | 157 | 20 | LUBE OIL,REFRIGERANT COMPRESSOR; VISCOSITY @ 100 DEG F : 32 CST MIN , POUR POINT : -35 DEG F, FLASH POINT : 325 DEG F, IV TYPE. | VV-L-825 | LI | 7 | 0 | — |
| DEGREASING SOLVENT | 158 | 35 | FOR USE IN CLEANING SURFACES TO BE BONDED BY LOCTITE,TRNASPARENT,HIGHLY FLAMMABLE.DENSITY @ 25DEG C : 0.74. EVAPORATION TIME @ 20DEG C : 60SEC. | CN | 8 | 0 | — | |
| LUBRICATING OILGEAR | 159 | 25 | EXTREME PRESSURE GEAR LUBE GRADE 75W,FOR GEARS AND TRANSMISSION.MINERAL OIL W/EXTREME ADDITIVES AND A TECHNICALLY ACCEPTABLE POUR PT DEPRESSANT. VIS:4.1CST@100C/150,000 CP@ 40C, MIN VIS INDEX:85, MIN FLASH PT:150C, API GL-5. GRADE 75W. O-186 / OEP-38 . | MIL-L-2105D | CN | 9 | 0 | — |
| LUBRICATING OILENGINE | 160 | 30 | SPARK AND COMPRESSION IGNITION ENGINE OIL,GRADE 40 PREMIUM MOTOR OIL SAE 40.BASIC INGREDIENT:ANY. ANTI- WEAR , ANTI-FOAM,AND CORROSION RESISTIVE. MIN VIS INDEX:80,VIS:12.9-16.8 CST@ 210F,MAX POUR PT:5F,MIN FLASH PT:435F.MIN API PERFORMANCE:SJ/CF. GRADE 4 | MIL-PRF-2104G | BX | 10 | 0 | — |
| LUBRICATING OIL GENERAL PURPOSE | 161 | 25 | EXTREME PRESSURE GEAR LUBE, SAE 80W90,MINERAL OIL WITH ADDITIVES AND TECHNICALLY ACCEPTABLE POUR PT DEPRESSANT.VIS:13.5-24.0 CST@100C.MIN FLASH PT:165C, MIN VISC INDEX:90,EFF TEMP RATING:-15 TO +130DEG C , OTHER CODE: O-226 / OEP-220 | DEFSTAN91-59/2 MILLPRF2105E | BT | 1 | 0 | — |
| LUBRICATING OILENGINEB222B224 | 162 | 40 | DIESEL ENGINE SUPER OIL DEO HD 3-30; SPEC GRAVITY @ 15 DEG C : 0.898 , FLASH POINT : 242 DEG C, VISCOSITY @ 40 TO 100 DEG C : 104 TO 11.8 CST, VISCOSITY INDEX : 101 , POUR POINT : - 18 DEG C. | CN | 1 | 0 | — | |
| GREASEBALL AND ROLLER BEARING | 163 | 40 | MULTIPURPOSE GREASE,LUB WHEEL BEARING,PUMP/CHASIS | CN | 2 | 0 | — | |
| GREASEAUTOMOTIVE | 164 | 40 | MULTIPURPOSE,MED,-29TO+121C;LITHIUM SOAP TYPE; VISCOSITY @ 40 / 100DEG C, @ 200 / 17.5, DROPPING POINT : 195DEG C, WORKED PENETRATION : (@ 25DEG C) 265 / 295, QTY : 120 LB/DR. | DR | 1 | 0 | — | |
| COOLANTANTIFREZE | 165 | 120 | SPECIFICATION NOT AVAILABLE | CN | 1 | 0 | — | |
| GREASE AIRCRAFT AND | 167 | 10 | NATO G-354. Def Stan 91-53/2, XG-287. MIL-PRF-23827C. Air 4210/B Iss 3. Ester-type synthetic oil w/ gelling agent, anti-oxidant and anti-corrosion inhibitors, and extreme pressure additives. Minimum Dropping Point: 180C. NGLI 2. Worked Penetration: 265-295. Effective Temperature Rating: -73 to +121C. | Multi-Purpose, Low Temperature Grease-NYCO GREASE 10, AVIATION GREASE 10 | CN | 1 | 0 | — |
| CASTROL GREASE A1 | 168 | 100 | SAWARI 2. NATO G-354. Def Stan 91-53/2, XG-287. MIL-PRF-23827C. Air 4210/B Iss 3. Mineral or ester-type synthetic oil w/ gelling agent, anti-oxidant and anti-corrosion inhibitors, and extreme pressure additives. Minimum Dropping Point: 180C. NGLI 2. Worked Penetration: 265-295. Effective Temperature Rating: -73 to +121C. | Multi-Purpose, Low Temperature Grease-CASTROL GREASE A1, GN10, NYCO 73EP | EA | 1 | 0 | — |
| LUBRICATING OIL | 169 | 100 | A-A-52039, SAE J2362. Basic Ingredient: Any acceptable w/ oxidation, wear, corrosion, and foaming inhibitors. Viscosity: 9.6 -12.9 cSt @ 210F. Maximum Pour Point: -25F. Minimum Flash Point: 400F. Grade 10W/30. Minimum API Performance: SG | Gasoline Engine Oil, Grade 10W/30-[NSN discontinued, use 9150-01-413-6892]-SAE-J300 ;10W-30; ,VIS9.60-12/210DEG F,P/P-25DEG F;FP 400D | CN | 2 | 0 | — |
| LUBRICATING OILENG | 170 | 10 | MIL-PRF-2104G, MIL-L-2104F, SAE J2362, NATO O-237. Basic Ingredient: Synthetically prepared oils, petroleum, and additives as needed to meet the specification. Oxidation and wear resistant. Anti-foam and corrosion resistive. Viscosity: 5.7 – 7.5 cSt @ 210F. Maximum Pour Point: -32F. Grade 10. MS OE/HDO-10. | Spark and Compression Ignition Engine Oil, Grade 10-HD SAE-10W; DIESEL ENGINE,FOR MODERATE & SEVERE SERV | DR | 3 | 0 | — |
| LUBRICATING OILENG | 171 | 10 | MIL-PRF-2104G, MIL-L-2104F, SAE J2362, NATO O-237. Basic Ingredient: Synthetically prepared oils, petroleum, and additives as needed to meet the specification. Oxidation and wear resistant. Anti-foam and corrosion resistive. Viscosity: 5.7 – 7.5 cSt @ 210F. Maximum Pour Point: -32F. Grade 10. MS OE/HDO-10. | Spark and Compression Ignition Engine Oil, Grade 10-RPM DELO 100 OIL SAE 10W; HD DEO,MIL-L-2104B,GD-SAE 10W | DR | 4 | 0 | — |
| SPRAYAEROSOL WATER | 172 | 10 | REPELLENT, WD40, AY1 7787 DTD 28/5/2007 | CN | 5 | 0 | — | |
| OILHYDRAULICHIG | 173 | 5 | MIL-PRF-17672D Amd 3 MS 2135TH. MIL-H-17672D Amd 3 Grade 2110-TH. Basic Ingredient: Additives and petroleum base. Oxidation resistant / corrosion resistive. Viscosity: 6.6 – 7.5 cSt @ 210F / 2800 cSt (Maximum) @ 10F. Maximum Pour Point: 0F. Minimum Flash Point: 340F. MS 2135-T-H | High Performance Hydraulic Oil, ISO VG 68-ENERGOL HLP-HM 68; O00710; EQV PETROMIN NR:005070-35; NUTO H68; DTE 26; DTE 16M, UNIVIS 68; | EA | 6 | 0 | — |
| OILTRANSMISSION | 174 | 10 | MIL-L-PRF-2105E Amd 2, Grade 90. Synthetic oil w/ anti-corrosion and extreme pressure additives. Minimum Viscosity Index: 85. Viscosity: No rated. Grade 90. | Synthetic Gear Lube SAE 90-1141635-1; RSN09230-001-IPB,GRP90,SAE90 SYNTHETIC | CN | 7 | 0 | — |
| OILTRANSMISSION | 175 | 10 | MIL-L-PRF-2105E Amd 2, Grade 90. Synthetic oil w/ anti-corrosion and extreme pressure additives. Minimum Viscosity Index: 85. Viscosity: No rated. Grade 90. | Synthetic Gear Lube SAE 90-1141636-9; RSN09230-001-IPB,GRP90,SAE90 SYNTHETIC | CO | 8 | 0 | — |
| OILHYDRAULICAW37 | 176 | 10 | 4LIX6EA PER BOX,REF:PETROMIN LTR DTD 11/5/1433H | BX | 9 | 0 | — | |
| HYDRAULIC OIL | 177 | 20 | Denison HF-0, HF-2. DIN 51524 Part II. Sperry Vickers M 2952 S. Basic Ingredient: Refined base oils w/ additives. Oxidation and wear resistant. Corrosion resistive. Viscosity: 37.3 cSt @ 40C / 5.9 cSt @ 100C. Viscosity Index: 102. Maximum Pour Point: -9C. Minimum Flash Point: 224C | Hydraulic Oil AW 37-5030-14; PETROMIN HYDRAULIC OIL,AW37 | CN | 10 | 0 | — |
| LUBOILREFRIGERANT | 178 | 5 | LUBRICATING OIL, REFRIGERANT COMPRESSOR | LUBRICATING OIL, REFRIGERANT COMPRESSOR | CN | 11 | 0 | — |
| LUBRICATING OILENG | 166 | 5 | MIL-L-2104F, SAE J2362. Basic Ingredient: Petroleum base w/ additives as necessary to meet the specified requirements. No carcinogenic or potentially carcinogenic components are allowed. Minimum Viscosity Index: 115. Viscosity: 52.4 cSt @ 40C / 7.7 cSt @100C. Maximum Pour Point: -24C. Minimum Flash Point: 228C. Minimum API Performance: SJ. Grade 20 PETROMIN OIL,ARAB LTR30/3/04/1228HR,API CF SAE 20 | Spark and Compression Ignition Engine Oil, Grade 20W/20-1120-35; ENGINE OIL API SH SAE 20 | LI | 1 | 0 | — |
178 بند
كراسة الشروط الرئيسية
| اسم المورد | قيمة العرض (ر.س) | قيمة الترسية (ر.س) | النتيجة الفنية | الحالة |
|---|---|---|---|---|
| شركة منظومة الرياض للتشغيل والإدارة | 107,286,331.50 | — | مطابق | مشارك |
| شركة مصنع راف التقنية للصناعة | 32,400.00 | — | غير مطابق | مشارك |
| شركة بترولوب للزيوت | 7,554,271.80 | — | مطابق | مشارك |
| شركة بترولوب للزيوت | 7,554,271.80 | 7,554,271.80 | — | مرسّى |
الآليات
تفضيل المنشآت الصغيرة والمتوسطة
معايير التقييم
معايير التقييم الفني
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم الفني |
معايير التقييم المالي
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم المالي | السعر | التكلفة الكلية | 100% |
أخبار المنافسة
title
تاريخ الإنشاء
value
25/11/45 11:14:59 ص
title
تاريخ فتح العروض
value
25/01/46 08:30:00 ص
title
تمديد تواريخ المنافسة
value
تاريخ فتح العروض25/01/46 08:30:00 صآخر موعد لتقديم العروض25/01/46 08:00:00 صآخر موعد لإستلام الإستفسارات18/01/46 12:00:00 ص
title
تاريخ الترسيه
value
16/05/1446