منافسة عامة
✓ مرسّى
تطوير تطبيقات مفتوحة المصدر لأنظمة الاتصالات المرئية الآمنة
الهيئة السعودية للبيانات والذكاء الاصطناعي
رقم المنافسة
240639009063
المعرّف
#801686
عنوان الضمان الإبتدائى
الهيئة السعودية للبيانات والذكاء الاصطناعي
الغرض من المنافسة
تطوير تطبيقات مفتوحة المصدر لأنظمة الاتصالات المرئية الآمنة.
| التاريخ | ميلادي | هجري |
|---|---|---|
| تاريخ النشر | 2024/08/26 16:08 | — |
| آخر موعد للاستفسارات | 2024/09/21 | 1446-03-18 |
| آخر موعد تقديم العروض | 2024/09/26 12:00 | 1446-03-23 |
| موعد فتح العروض | 2024/09/26 13:00 | 1446-03-23 |
| موعد فحص العروض | — | — |
| التاريخ المتوقع للترسية | 2024/10/14 | 1446-04-11 |
| تاريخ بدء الأعمال | 2024/11/18 | 1446-05-16 |
| تاريخ خطاب تأكيد المشاركة | — | — |
| بداية إرسال الأسئلة | 2024/09/18 | 1446-03-15 |
| أقصى مدة للإجابة | 10 يوم | |
| مكان فتح العروض | الخدمات المشتركة - لجنة فتح العروض | |
| مدة الوقفة | 5 يوم |
موقع التنفيذ
مجال التصنيف
الأنشطة
- • تقنية المعلومات
جدول 1 المواد - تقنية معلومات
| البند | الفئة | الكمية | وصف البند | المواصفات | وحدة القياس | الرقم التسلسلي | منتج من القائمة الإلزامية |
|---|---|---|---|---|---|---|---|
| خدمة التطوير و التصميم | خدمات | 1 | كما هو موضح بالمواصفات | "تشمل على خدمة تصميم وتنفيذ الهيكلة المعمارية، وخدمات تطويرية برمجية لتنفيذ الحلول التقنية المبنية على التصاميم المعتمدة باستخدام التقنيات الالزمة، وتطوير برمجية لتصميم تجربة المستخدم، والاختبارات البرمجية والتواجدية واستمرارية الاعمال (التواجديه العاليه ، والتعافي من الكوارث) اضافة الاختبارات السيبرانية اللازمة على سبيل المثال لا الحصر اختبارات BT واختبارات التشفير ...ألخ" | عدد | 1 | 0 |
| خدمات مدارة للتطبيقات | خدمات | 3 | كما هو موضح بالمواصفات | خدمات المدارة لجميع التطبيقات ومكونات الفنية وادراة ونشر النظام بالكامل والتكامل مع الانظمة الاخرى مع تطبيق التواجدية العالية للتطبيقات في مراكز البيانات طوال فترة المشروع | عدد | 2 | 0 |
| خدمات مدارة لاعمال التركيبات | خدمات | 1 | كما هو موضح بالمواصفات | خدمات التركيب بمراكز البيانات (الرياض،جده) و تشمل على: تهيئة المواقع لأعمال التركيب وتنفيذ الاعمال الميدانية الالزمة للمشروع والتمديد (ان وجد) تركيب الخوادم و اجهزه الشبكه حسب نطاق المشروع عمليات التركيب والدعم والتشغيل وتشمل تركيب المعدات الجديدة في البنية التحتية كذلك توفير كافة المعدات الالزمة لعملية التركيب مثل الكباين لكامل متطلبات نطاق المشروع معووزعات الطاقة و (panel patch) لكل كبينه ومحولات الضوئية (SFPs) و الكيابل لتوصيل جميع نطاق المشروع. | عدد | 3 | 0 |
| توريد وتركيب رخص نظام اداره الخوادم الافتراضيه | رخص | 2496 | كما هو موضح بالمواصفات | "Cloud Foundation: vSphere 8 Enterprise Pluse vSan Enterprise per TiB Aria suite Enterprise NSX Networking fo VCF HCCX Enterprise Support for 3 years" | عدد | 4 | 0 |
| رخصة نظام توزيع الأحمال | رخص | 4 | كما هو موضح بالمواصفات | """مواصفات رخص: Virtual Edition Local Traffic Manager High Performance (8 vCPUs, v13.x - v18.x) Level 1-3 Premium Service for Virtual Edition (24x7) Implementation of the system• All required HW and SW licenses and should not be activated until installation is completed.""" | عدد | 5 | 0 |
| الدعم الفني Premium Support لاجهزة الشبكة لمدة ثلاث سنوات | رخص | 1 | كما هو موضح بالمواصفات | "Expert Care Services Facilitate problem resolution on a reactive basis for technical issues Provide incident management and escalation management for Severity 1 and Severity 2 SRs twenty-four (24) hours a day, seven (7) days a week. Incident management and escalation management of Severity 3 and Severity 4 the SRs will be limited to Business Hours and Business Days unless otherwise specified on quote document Conduct post incident review to determine recommendations for corrective actions and best practices for improving operational support processes as needed Conduct operational assessment of Customer’s current processes and recommend best practices for incident and event management as needed. Provide Return Material Authorization (RMA) reporting as applicable. Provide Administrative Support of customer facing SR related tools. Create Customer profile for Technical Services knowledge of Customer’s operations processes, procedures, and network access for support. Conduct a quarterly review of Deliverables and activities provided during the immediate past timeframe and actions planned for the next quarter. Conduct regular proactive operations excellence assessments. Review status and progress of Service Delivery levels as applicable. Provide reporting on the return of parts requiring Engineering Failure Analysis (EFA). Provide direct access, where available, during Business Hours. Perform root cause analysis on high severity technical issues in the Network Infrastructure. Provide, as allotted or purchased, Proactive Maintenance Window (PMW) support. PMWs are customer initiated maintenance windows not directly associated with resolving an open SR. لمدة ثلاث سنوات" | عدد | 6 | 0 |
| خدمة الدعم الفني Focused Services Plus لانظمة جدران الحماية الاولى | رخص | 1 | كما هو موضح بالمواصفات | Focused Services Plus for 3 years including : • Support Review and Management • Root Cause Analysis for Key Issues • Priority Case Handling • Proactive Alerts and Best Practice Assessments • Product Feature Guidance • Product Release Guidance • Tailored Product Release Analysis • Service Orchestration • Periodic Business Reviews • Access to Focused Services Webinars • SecOps Optimization Service • Proactive Performance Sweep التوريد والتركيب حسب نطاق العمل بأشراف من الشركة المصنعة بالمملكة والتأكد من مطابقتها مع جميع المتطلبات على ان يقوم المنافس بتقديم خطاب من الشركة المصنعة بالعرض الفني يفيد بأشراف فريق الشركة المصنعة في بناء جدول الكميات المطلوبة وسلامة التحديثات وعمل الخدمات بالشكل المطلوب. | عدد | 7 | 0 |
| خدمة الدعم الفني Advanced Support لانظمة جدران الحماية الثانية | رخص | 1 | كما هو موضح بالمواصفات | Advanced Support: Pro Plus for 3 years including : • Fast-track access to technical expertise • Maximize impact with advocates who know the business • A designated Technical Account Manager will act as the primary technical interface and assist in resolving technical incidents, including technical escalations • Analyze customers’ technical and operational environment and provide service improvement plans. • Provide software upgrade recommendations and assistance for products. • Conduct periodic calls to discuss open technical support tickets and on-going projects • Four-hour workaround SLA • Root-cause analysis التوريد والتركيب حسب نطاق العمل بأشراف من الشركة المصنعة بالمملكة والتأكد من مطابقتها مع جميع المتطلبات على ان يقوم المنافس بتقديم خطاب من الشركة المصنعة بالعرض الفني يفيد بأشراف فريق الشركة المصنعة في بناء جدول الكميات المطلوبة وسلامة التحديثات وعمل الخدمات بالشكل المطلوب. | عدد | 8 | 0 |
| الدعم الفني Expert Care Services | رخص | 1 | كما هو موضح بالمواصفات | "Expert Care Services for 3 years: Facilitate problem resolution on a reactive basis for technical issues Provide incident management and escalation management for Severity 1 and Severity 2 SRs twenty-four (24) hours a day, seven (7) days a week. Incident management and escalation management of Severity 3 and Severity 4, and SRs will be limited to Business Hours and Business Days unless otherwise specified on quote document Conduct post incident review to determine recommendations for corrective actions and best practices for improving operational support processes as needed Conduct operational assessment of Customer’s current processes and recommend best practices for incident and event management as needed. Provide Return Material Authorization (RMA) reporting as applicable. Provide Administrative Support of customer facing SR related tools. Create Customer profile for Technical Services knowledge of Customer’s operations processes, procedures, and network access for support. Conduct a quarterly review of Deliverables and activities provided during the immediate past timeframe and actions planned for the next quarter. Conduct regular proactive operations excellence assessments. Review status and progress of Service Delivery levels as applicable. Provide reporting on the return of parts requiring Engineering Failure Analysis (EFA). Provide direct access, where available, during Business Hours. Perform root cause analysis on high severity technical issues in the Network Infrastructure. Provide, as allotted or purchased, Proactive Maintenance Window (PMW) support. PMWs are customerinitiated maintenance windows not directly associated with resolving an open SR." | عدد | 9 | 0 |
| توريد وتركيب موزع نوع 4 | أجهزة | 2 | كما هو موضح بالمواصفات | "The switch should be designed for data centers. requiring a high-density, high-performance, and scalable solution for cloud deployments, AI/ML workloads, and other demanding applications. And should provide the following specification: Port Density: - 64 ports supporting 800 Gigabit Ethernet (GbE) connectivity on 2U form factor. - Supports 400GbE, 100GbE over breakout SFPs and cables for flexibility. Performance: - More than 100 Tbps (bidirectional) of system throughput with low latency. Software Features: - Advanced buffering and congestion control for superior performance. - ROCEv2 along with congestion management features like PFC, explicit congestion notification (ECN), and data center quantized congestion notification (DCQCN)" | عدد | 10 | 0 |
| توريد وتركيب 800G محول ضوئي للموزعات مطابق لنوع المطلوب في نطاق المشروع | أجهزة | 16 | كما هو موضح بالمواصفات | "800G (2x400G) SFPs propose engough number of OSFP800, 2X400G DR4 SFPs to ensure 1:1 over-subscription between the downlinks and uplinks ." | عدد | 11 | 0 |
| توريد وتركيب 10G محول ضوئي للموزعات مطابق لنوع المطلوب في نطاق المشروع | اجهزة | 40 | كما هو موضح بالمواصفات | 10GbE, SFP+, LC-LC, 850nm, SR Transceiver | عدد | 12 | 0 |
| توريد وتركيب 25G محول ضوئي للموزعات مطابق لنوع المطلوب في نطاق المشروع | اجهزة | 400 | كما هو موضح بالمواصفات | 25GbE, SFP28, LC-LC, 850nm, SR Transceiver | عدد | 13 | 0 |
| توريد وتركيب 100G محول ضوئي للموزعات مطابق لنوع المطلوب في نطاق المشروع | اجهزة | 100 | كما هو موضح بالمواصفات | 100GbE, SFP100, LC-LC, 850nm, SR Transceiver | عدد | 14 | 0 |
| توريد وتركيب موزع نوع 3 | اجهزة | 2 | كما هو موضح بالمواصفات | "•24-port x 1/10/25G + 4-port 40/100G, Advantage • CX LEVEL 1 8X5XNBD 24 1/10/25G + 4-port • Power Cord, 250VAC 10A BS1363 Plug (13 A fuse), UK • Network Stack, Advantage • DNA Advantage 3 Year License • CX LEVEL 1 SW SUB CX LEVEL 1 SW SUB C9 • Network Plug-n-Play Connect for zero-touch device deployment" | عدد | 15 | 0 |
| توريد وتركيب موجه | اجهزة | 2 | كما هو موضح بالمواصفات | Router with 4x SFP+ and 8x SFP, 4x10GE, 8x1GE, SNTC-8X5XNBD Series 12-port SFP+, Edge RFID - 1RU, Edge M.2 USB 16GB, Rack mount kit - 19" 1R, Network Plug-n-Play Connect for zero-touch device deployment, DNA-P-T1-A-3Y. support 3 years. | عدد | 16 | 0 |
| توريد وتركيب موزع نوع 2 | اجهزة | 8 | كما هو موضح بالمواصفات | "•48-port x 1/10/25G + 4-port 40/100G, Advantage • CX LEVEL 1 8X5XNBD Catalyst 48-port x 1/10/25G + 4-port • Power Cord, 250VAC 10A BS1363 Plug (13 A fuse), UK • Network Stack, Advantage • DNA Advantage 3 Year License • CX LEVEL 1 SW SUB CX LEVEL 1 SW SUB C9 • Network Plug-n-Play Connect for zero-touch device deployment" | عدد | 17 | 0 |
| توريد وتركيب موزع نوع 1 | اجهزة | 4 | كما هو موضح بالمواصفات | "24-port 40/100G, Advantage • CX LEVEL 1 8X5XNBD 24-port x 40/100G • Power Cord, 250VAC 10A BS1363 Plug (13 A fuse), UK • Network Stack, Advantage • DNA Advantage 3 Year License • CX LEVEL 1 SW SUB CX LEVEL 1 SW SUB C9 • Network Plug-n-Play Connect for zero-touch device deployment" | عدد | 18 | 0 |
| توريد وتركيب وحدة منافذ للموزع | اجهزة | 2 | كما هو موضح بالمواصفات | Line card -LC-24C: 24-Port 40GE/12-Port 100GE Spare | عدد | 19 | 0 |
| توريد وتركيب جدار ناري نوع 2 | اجهزة | 4 | كما هو موضح بالمواصفات | "4x 25G SFP28 slots, 4 x 10GE SFP+ slots, 18 x GE RJ45 ports (including 1 x MGMT port, 1 X HA port, 16 x switch ports), 8 x GE SFP slots, SPU NP7 and CP9 hardware accelerated, 480GB onboard SSD storage, dual AC power supplies. Threat Protection 10.5 Gbps, IPS 14 Gbps, Client-to-Gateway IPsec VPN Tunnels 50 000.Premium support 3 years. 4X10GSFP" | عدد | 20 | 0 |
| توريد وتركيب جدار ناري نوع 3 | اجهزة | 8 | كما هو موضح بالمواصفات | 1G/2.5G/5G/10G (12), 1G/10G SFP/SFP+ (10), 25G SFP28 (4), 40G/100G QSFP/QSFP28 (2), 480 GB SSD , Premium support 3 years, threat prevention 3 years ,(4X SFP28 form factor, SR 25Gb optical transceiver, short reach 300m, OM3 MMF, duplex LC, IEEE 802.3ae 10GBASE-SR compliant). Threat Prevention throughput 9.2/10.5 Gbps. | عدد | 21 | 0 |
| توريد وتركيب جدار ناري نوع 1 | اجهزة | 4 | كما هو موضح بالمواصفات | 10/100/1000 (4), 1G/2.5G/5G (4), 1G/2.5G/5G (4)/PoE, 1G SFP (2), 1G/10G SFP/SFP+ (8), 240 GB SSD,2XPower Supply, Premium support 3 years, Threat 3 years, Protection subscription 3 years, (4X SFP form factor, SX 10Gb optical transceiver, 550m reach on OM2 MMF, duplex LC, IEEE 802.3z 1000BASE-SX compliant). Threat Prevention throughput 5.0/4.8 Gbps, Max tunnels 1500. | عدد | 22 | 0 |
| توريد وتركيب نظام النسخ الاحتياطي2 | اجهزة | 1 | كما هو موضح بالمواصفات | "The proposed Backup storage system must be 100% NVMe All Falsh, also all capacity expansion shelves must be connected through NVMe-oF protocol. • Proposed All-Flash Backup Storage must support block protocols FC and iSCSI, NVMe-oF, NVMe-FC, NVMe-TCP, and File protocols NFS and SMB/CiFS. • Proposed All-Flash Backup Storage solution must provide Minimum of 110TB of usable capacity. • The Proposed All-Flash Backup Storage should be tested and certified with Veeam backup solution. • Proposed All-Flash Backup Storage should deliver the highest density and efficiency, to reduce datacenter footprint. Proposed storage solution rack space should not exceed 3 Rack Units per datacenter. • Proposed All-Flash Backup Storage must be highly sustainable by design to reduce data center carbon emissions. It must reduce the environmental footprint in SDAIA by requiring substantially less power, space, and cooling and by producing less waste. • Proposed All-Flash Backup Storage power consumption should not exceed 1.3 KW peak per datacenter. • Proposed All-Flash Backup Storage system must be configured with latest CPU generation, not less Sapphire Rapids generation • Proposed All-Flash Backup Storage must be with Active-Active paths from both controllers. Active/Optimized paths are not acceptable. • Proposed All-Flash Backup Storage capacity must be upgradable and expandable without down-time or data migration (Data-in-Place) • Proposed All-Flash Backup Storage should include and guarantee that all existing and future software licenses are included (price inclusive) from day one. • Proposed All-Flash Backup Storage should have built-in data protection and mitigation feature against Ransomware attacks and deliver fast recovery for the production data and without extra cost. • Proposed All-Flash Backup Storage must be offered with 3 years of support minimum, and the vendor should guarantee fixed maintenance price for at least 10-15 years. Any problematic hardware or software must be replaced with like or better as long as the Storage Array is under support. • Proposed Backup Storage system must include a forever controller upgrade to latest generation non-disruptively (Data-In-Place) every three years as long as SDAIA maintains a valid support/maintenance contract. This program should not be a one-time upgrade program and it shouldn't require a separate service or a purchase. • The proposed Backup storage system must not have any EOL/EOSL dates and the vendor should guarantee this in writing while maintaining flat support prices “None-increasing”. • Any time of All-Flash Backup Storage expansion with a qualifying capacity purchase, trade-in credit for existing controllers towards the most modern controllers should be applied. • Any capacity expansions not tied to an Upgrade qualify for trade-in credit for a portion of the existing capacity, for less dense flash. • The proposed Backup storage system must be with lifetime warranty on all media without restriction on write rates or time. guaranteed by the vendor in a written format signed by the vendor legal department. • The offered All-Flash Backup Storage must support different applications and solutions integrations, such as VMware, OpenStack, Containers, Microsoft Solutions, and Automation and orchestration tools such as Ansible, Terraform, Puppet, ..,etc. • Proposed All-Flash Backup Storage must be 99.9999% availability including all software and hardware upgrades. • Proposed All-Flash Backup Storage must be a stateless architecture and is not based on cache design. which means no backup power or battery are required by design. • The proposed All-Flash Backup Storage should guarantee that no performance impact or degradation (under 100% load) during any hardware failure. The array should maintain full performance under load during controller failure. • The Proposed All-Flash Backup Storage must be able to protect data integrity and maintain data availability with no performance impact during simultaneous dual Flash Drives failure. • Proposed All-Flash Backup Storage must guarantee non-disruptive software and hardware upgrades with no performance impact, such as upgrading to a higher model, upgrading to a different product generation or any software upgrade. • Proposed All-Flash Backup Storage should have variable block size deduplication enabled by default (Always-On) and global on the whole array without any impact on the performance or any tuning. • Proposed All-Flash Backup Storage should have compression enabled by default (Always-On), inline and post-line compression with heavier-weight compression algorithms to increase the savings on inline-compressed data. • Proposed All-Flash Backup Storage must support native, space-efficient snapshots and clones without the need for additional hardware, software, or license. • Proposed All-Flash Backup Storage must support built-in asynchronous, point-in-time, space-efficient remote replication without the need for additional hardware, software, or license. • Proposed All-Flash Backup Storage should have Encryption at rest enabled by default (Always-On) with no performance impact and without the need for additional hardware, software, or license. • Proposed All-Flash Backup Storage should support mixing of different size of NVMe Flash Drives in the same Array. This should apply for any future Flash technology. • Support SLA must be 15 minutes response time for Severity 1 cases, and 4 hours to replace for any major hardware failure. • Resident engineer for 1 year" | عدد | 23 | 0 |
| توريد وتركيب نظام أرشفة | اجهزة | 2 | كما هو موضح بالمواصفات | "Tape library with the following specifications: - Scalability of up to 480TB (native per base chassis) - Drive Type: LTO-6, LTO-7, LTO-8 - Number of Drives: Up to 3 per 3U (half-height) - Number of Cartridges: 40 per chassis & maximum of 280 with six expansion modules - Import/Export Slots of 5 - Form factor of 3U - Chassis formfactor is Tabletop or rackmount - Media supported: o LTO-6, LTO-6 WORM o LTO-7 Type M, LTO-7, LTO-7 WORM o LTO-8 o LTO Ultrium Cleaning Cartridge - Max Native Capacity of 480TB & maximum of 3360TB (base & six expansion) - Max Native backup rate per drive: o LTO-6: 160MB/s, 576GB/hr o LTO-7: 300MB/s, 1080GB/hr o LTO-8: 300MB/s, 1080GB/hr (half-height) o LTO-8: 360MB/s, 1296GB/hr (full-height) - IO Interface: o 6Gb SAS, 8Gb FC - Library-managed encryption: Activation license has to be included as a standard Support for host Application Managed Encryption (AME) and Library Managed Encryption (LME) - SAN Switches required for host connectivity has to be included for the proposed tape library deployment. - The proposed Tape Library should be composed of one base chassis with: o 3x half height Tape Drives o 80x LTO9 Media o 2x SAN Switches for host connectivity - Onsite Professional Services must be included. - 3 Years Mission Critical Support must included" | عدد | 24 | 0 |
| توريد وتركيب نظام النسخ الاحتياطي1 | اجهزة | 1 | كما هو موضح بالمواصفات | "The proposed Backup storage system must be 100% NVMe All Falsh, also all capacity expansion shelves must be connected through NVMe-oF protocol. • Proposed All-Flash Backup Storage must support block protocols FC and iSCSI, NVMe-oF, NVMe-FC, NVMe-TCP, and File protocols NFS and SMB/CiFS. • Proposed All-Flash Backup Storage solution must provide Minimum of 150TB of usable capacity. • The Proposed All-Flash Backup Storage should be tested and certified with Veeam backup solution. • Proposed All-Flash Backup Storage should deliver the highest density and efficiency, to reduce datacenter footprint. Proposed storage solution rack space should not exceed 3 Rack Units per datacenter. • Proposed All-Flash Backup Storage must be highly sustainable by design to reduce data center carbon emissions. It must reduce the environmental footprint in SDAIA by requiring substantially less power, space, and cooling and by producing less waste. • Proposed All-Flash Backup Storage power consumption should not exceed 1.3 KW peak per datacenter. • Proposed All-Flash Backup Storage system must be configured with latest CPU generation, not less Sapphire Rapids generation • Proposed All-Flash Backup Storage must be with Active-Active paths from both controllers. Active/Optimized paths are not acceptable. • Proposed All-Flash Backup Storage capacity must be upgradable and expandable without down-time or data migration (Data-in-Place) • Proposed All-Flash Backup Storage should include and guarantee that all existing and future software licenses are included (price inclusive) from day one. • Proposed All-Flash Backup Storage should have built-in data protection and mitigation feature against Ransomware attacks and deliver fast recovery for the production data and without extra cost. • Proposed All-Flash Backup Storage must be offered with 3 years of support minimum, and the vendor should guarantee fixed maintenance price for at least 10-15 years. Any problematic hardware or software must be replaced with like or better as long as the Storage Array is under support. • Proposed Backup Storage system must include a forever controller upgrade to latest generation non-disruptively (Data-In-Place) every three years as long as SDAIA maintains a valid support/maintenance contract. This program should not be a one-time upgrade program and it shouldn't require a separate service or a purchase. • The proposed Backup storage system must not have any EOL/EOSL dates and the vendor should guarantee this in writing while maintaining flat support prices “None-increasing”. • Any time of All-Flash Backup Storage expansion with a qualifying capacity purchase, trade-in credit for existing controllers towards the most modern controllers should be applied. • Any capacity expansions not tied to an Upgrade qualify for trade-in credit for a portion of the existing capacity, for less dense flash. • The proposed Backup storage system must be with lifetime warranty on all media without restriction on write rates or time. guaranteed by the vendor in a written format signed by the vendor legal department. • The offered All-Flash Backup Storage must support different applications and solutions integrations, such as VMware, OpenStack, Containers, Microsoft Solutions, and Automation and orchestration tools such as Ansible, Terraform, Puppet, ..,etc. • Proposed All-Flash Backup Storage must be 99.9999% availability including all software and hardware upgrades. • Proposed All-Flash Backup Storage must be a stateless architecture and is not based on cache design. which means no backup power or battery are required by design. • The proposed All-Flash Backup Storage should guarantee that no performance impact or degradation (under 100% load) during any hardware failure. The array should maintain full performance under load during controller failure. • The Proposed All-Flash Backup Storage must be able to protect data integrity and maintain data availability with no performance impact during simultaneous dual Flash Drives failure. • Proposed All-Flash Backup Storage must guarantee non-disruptive software and hardware upgrades with no performance impact, such as upgrading to a higher model, upgrading to a different product generation or any software upgrade. • Proposed All-Flash Backup Storage should have variable block size deduplication enabled by default (Always-On) and global on the whole array without any impact on the performance or any tuning. • Proposed All-Flash Backup Storage should have compression enabled by default (Always-On), inline and post-line compression with heavier-weight compression algorithms to increase the savings on inline-compressed data. • Proposed All-Flash Backup Storage must support native, space-efficient snapshots and clones without the need for additional hardware, software, or license. • Proposed All-Flash Backup Storage must support built-in asynchronous, point-in-time, space-efficient remote replication without the need for additional hardware, software, or license. • Proposed All-Flash Backup Storage should have Encryption at rest enabled by default (Always-On) with no performance impact and without the need for additional hardware, software, or license. • Proposed All-Flash Backup Storage should support mixing of different size of NVMe Flash Drives in the same Array. This should apply for any future Flash technology. • Support SLA must be 15 minutes response time for Severity 1 cases, and 4 hours to replace for any major hardware failure. • Resident engineer for 3 year" | عدد | 25 | 0 |
| توريد وتركيب نظام التخزين | احهزة | 2 | كما هو موضح بالمواصفات | "The proposed Backup storage system must be 100% NVMe All Falsh, also all capacity expansion shelves must be connected through NVMe-oF protocol. • Proposed All-Flash Backup Storage must support block protocols FC and iSCSI, NVMe-oF, NVMe-FC, NVMe-TCP, and File protocols NFS and SMB/CiFS. • Proposed All-Flash Backup Storage solution must provide Minimum of 150TB of usable capacity. • The Proposed All-Flash Backup Storage should be tested and certified with Veeam backup solution. • Proposed All-Flash Backup Storage should deliver the highest density and efficiency, to reduce datacenter footprint. Proposed storage solution rack space should not exceed 3 Rack Units per datacenter. • Proposed All-Flash Backup Storage must be highly sustainable by design to reduce data center carbon emissions. It must reduce the environmental footprint in SDAIA by requiring substantially less power, space, and cooling and by producing less waste. • Proposed All-Flash Backup Storage power consumption should not exceed 1.3 KW peak per datacenter. • Proposed All-Flash Backup Storage system must be configured with latest CPU generation, not less Sapphire Rapids generation • Proposed All-Flash Backup Storage must be with Active-Active paths from both controllers. Active/Optimized paths are not acceptable. • Proposed All-Flash Backup Storage capacity must be upgradable and expandable without down-time or data migration (Data-in-Place) • Proposed All-Flash Backup Storage should include and guarantee that all existing and future software licenses are included (price inclusive) from day one. • Proposed All-Flash Backup Storage should have built-in data protection and mitigation feature against Ransomware attacks and deliver fast recovery for the production data and without extra cost. • Proposed All-Flash Backup Storage must be offered with 3 years of support minimum, and the vendor should guarantee fixed maintenance price for at least 10-15 years. Any problematic hardware or software must be replaced with like or better as long as the Storage Array is under support. • Proposed Backup Storage system must include a forever controller upgrade to latest generation non-disruptively (Data-In-Place) every three years as long as SDAIA maintains a valid support/maintenance contract. This program should not be a one-time upgrade program and it shouldn't require a separate service or a purchase. • The proposed Backup storage system must not have any EOL/EOSL dates and the vendor should guarantee this in writing while maintaining flat support prices “None-increasing”. • Any time of All-Flash Backup Storage expansion with a qualifying capacity purchase, trade-in credit for existing controllers towards the most modern controllers should be applied." | عدد | 26 | 0 |
| توريد وتركيب خوادم مواصفات 3 | اجهزة | 2 | كما هو موضح بالمواصفات | 8U X13 HGX H100 8GPU (Rear I/O), X13DEG-OAD, CSE-GP801T X 1 8462Y+ 2P 32C 2.8G 300W(32/2.6/270,24/3/270)60M BI(1111) 7yr X 2 64GB DDR5-4800 2RX4 (10X4) LP (16Gb) ECC RDIMM X 32 7450 PRO 960GB NVMe PCIe 4.0 M.2 22x80mm 3D TLC, X 2 7450 PRO 15.3TB NVMe PCIe4 3D TLC U.3 15mm,1DWPD X 8 Std LP 2-port 25G SFP28, Mellanox ConnectX-4 L (Retail Pack) X 3 MCX653106A-ECAT,CX-6 VPI,HDR100,100GbE,2p,QSFP56,Gen4x16 X 8 SPI TPM 2.0 using SLB9670 (Retail Pack) X 1 DataCenter Management Package (per node license) X 1 SOCKET E LGA4677,E1A XCC CARRIER,DG 1.0,RoHS X 2 Std LP 2-port 10G RJ45, X550 (Retail Pack) X 1 DELTA-NEXT HGX GPU Baseboard, 8 H100 80GB SXM5 X 1 MMA2P00-AS, Mellanox TXCVR,25GbE,SFP28,LC-LC, 850nm, SR X 6 MMA1B00-C100D,Optical TXCVR,QSFP28,100GBASE-SR4,850nm X 32 AC-DC 3000W, Titanium efficiency, DC output: 54Vdc/45A X 2 BLADE PWS POWER CORD C-19 TO C-20, PBF X 2 3 YEARS HARDWARE WARRANTY التوريد والتركيب حسب نطاق العمل بأشراف من الشركة المصنعة بالمملكة والتأكد من مطابقتها مع جميع المتطلبات على ان يقوم المنافس بتقديم خطاب من الشركة المصنعة بالعرض الفني يفيد بأشراف فريق الشركة المصنعة في بناء جدول الكميات المطلوبة وسلامة التحديثات وعمل الخدمات بالشكل المطلوب | عدد | 27 | 0 |
| توريد وتركيب خوادم مواصفات 1 | اجهزة | 44 | كما هو موضح بالمواصفات | "Hyperconverged solution with recourses with the following specifications:X13DET-B, CSE-217BD2-R2K22P, SCC-P12N12SGH-B2 X 1 EMR 6542Y 2P 24C2.9G250W(20/2.9/225,16/3/205)60M SGX128 (1xDSA) X 4 64GB DDR5 4800 ECC REG X 16 D7-P5620 1.6TB NVMePCIe4.0X4 3D TLC U.2 15mm3DWPD X 2 D7-P5520 7.68TB NVMe PCIe4.0 X4 3DTLCU.2 15mm<2DWPD X 6 2x Gen3 Marvell2241 NVMe M.2 RAID with 1x PCIEx16 Gen5 S X 2 7450 MAX 400GB NVMe PCIe 4.0 3D TLC M.2 22x80mm X 4 2x 25GbE SFP28 Mellanox CX-4 and 2x 10GbE RJ45 X550-AT2 X 2 2-ports Mellanox MCX631102AN-ADAT PCIe 25GbE SFP28 Gen4x8 CX-6 Lx, RoHS X 4 2-ports 32Gb LCSFP+ Emulex LPE32002-M2 Fibre Channel, Gen3 x8 LP X 2 SPI Capable Horizontal TPM 2.0 X 2 DataCenter Management Package (per node license) X 2 SOCKET E E1B CARRIER LGA 4677 W/SHIM SP MCC,LCC,DG1.0 ,RoHS X 4 25GbE, SFP28, LC-LC, 850nm, SR Transceiver X 12 3-YEARs Hardware Warranty X 1" | عدد | 28 | 0 |
| توريد وتركيب خوادم مواصفات 2 | اجهزة | 12 | كما هو موضح بالمواصفات | "Hyperconverged solution with recourses with the following specifications: X13DET-B, CSE-217BD2-R2K22P, SCC-P12N12SGH-B2 X 1 EMR 6544Y 2P 16C3.6G270W(12/3.6/225,8/3.9/205)45M SGX128 (1xDSA) X 4 64GB DDR5 4800 ECC REG X 16 D7-P5620 1.6TB NVMePCIe4.0X4 3D TLC U.2 15mm3DWPD X 2 D7-P5520 7.68TB NVMe PCIe4.0 X4 3DTLCU.2 15mm<2DWPD X 6 2x Gen3 2241 NVMe M.2 RAID with 1x PCIEx16 Gen5 S X 2 7450 MAX 400GB NVMe PCIe 4.0 3D TLC M.2 22x80mm X 4 2x 25GbE SFP28 Mellanox CX-4 and 2x 10GbE RJ45 X550-AT2 X 2 2-ports Mellanox MCX631102AN-ADAT PCIe 25GbE SFP28 Gen4x8 CX-6 Lx, RoHS X 4 2-ports 32Gb LCSFP+ Emulex LPE32002-M2 Fibre Channel, Gen3 x8 LP X 2 SPI Capable Horizontal TPM 2.0 X 2 DataCenter Management Package (per node license) X 2 SOCKET E E1B CARRIER LGA 4677 W/SHIM SP MCC,LCC,DG1.0 ,RoHS X 4 25GbE, SFP28, LC-LC, 850nm, SR Transceiver X 12 3-YEARs Hardware Warranty X 1" | عدد | 29 | 0 |
29 بند
كراسة الشروط الرئيسية
المستندات الداعمة (16 ملف)
| اسم المورد | قيمة العرض (ر.س) | قيمة الترسية (ر.س) | النتيجة الفنية | الحالة |
|---|---|---|---|---|
| شركة المعمر لانظمة المعلومات | 83,809,052.55 | — | غير مطابق | مشارك |
| شركة بعد للاتصالات السلكية واللاسلكية شركة شخص واحد | 70,850,000.40 | — | مطابق | مشارك |
| شركة بعد للاتصالات السلكية واللاسلكية شركة شخص واحد | 70,850,000.40 | 70,850,000.40 | — | مرسّى |
الآليات
آلية وزن المحتوى المحلي في التقييم المالي
معايير التقييم
معايير التقييم الفني
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم الفني |
معايير التقييم المالي
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم المالي | السعر | التكلفة الكلية | 100% |
أخبار المنافسة
title
تاريخ الإنشاء
value
06/12/45 12:14:47 م
title
تاريخ فتح العروض
value
23/03/46 01:00:00 م
title
تمديد تواريخ المنافسة
value
تاريخ فتح العروض23/03/46 01:00:00 مآخر موعد لتقديم العروض23/03/46 12:00:00 مآخر موعد لإستلام الإستفسارات18/03/46 12:00:00 ص
title
تاريخ الترسيه
value
26/09/1446