منافسة إتفاقية إطارية
✓ مرسّى
مشروع تأمين الأجهزة للمنافذ والمواقع الإطاري - المرحلة الثانية
الهيئة السعودية للبيانات والذكاء الاصطناعي
رقم المنافسة
250339014253
المعرّف
#923166
الغرض من المنافسة
تسعى الهيئة السعودية للبيانات والذكاء الاصطناعي ممثلة بمركز المعلومات الوطني الى التعاقد مع إحدى الشركات المتخصصة ذات الخبرة في مجال توريد أجهزة الشبكات واجهزة الحاسب وملحقاتها.
| التاريخ | ميلادي | هجري |
|---|---|---|
| تاريخ النشر | 2025/07/16 17:30 | — |
| آخر موعد للاستفسارات | 2025/09/09 | 1447-03-17 |
| آخر موعد تقديم العروض | 2025/09/15 12:00 | 1447-03-23 |
| موعد فتح العروض | 2025/09/15 13:00 | 1447-03-23 |
| موعد فحص العروض | — | — |
| التاريخ المتوقع للترسية | 2025/09/16 | 1447-03-24 |
| تاريخ بدء الأعمال | 2025/10/20 | 1447-04-28 |
| تاريخ خطاب تأكيد المشاركة | — | — |
| بداية إرسال الأسئلة | 2025/09/03 | 1447-03-11 |
| أقصى مدة للإجابة | 5 يوم | |
| مكان فتح العروض | الخدمات المشتركة - لجنة فتح العروض | |
| مدة الوقفة | 5 يوم |
موقع التنفيذ
مجال التصنيف
الأنشطة
- • تقنية المعلومات
أعمال الصيانة
- • صيانة وتشغيل تقنية الاتصالات
وصف المنافسة
منطقة الرياض ، منطقة مكة المكرمة ، منطقة الشرقية ، منطقة المدينة المنورة ، منطقة تبوك ، منطقة عسير ، منطقة الحدود الشمالية ، منطقة القصيم ، مدينة حائل ، مدينة جازان ، منطقة الباحة ، مدينة نجران ، منطقة الجوف ، ومدينة الطائف
جدول 1 المواد - تقنية معلومات
| البند | الفئة | الكمية | وصف البند | المواصفات | وحدة القياس | الرقم التسلسلي | الرمز الإنشائي | منتج من القائمة الإلزامية |
|---|---|---|---|---|---|---|---|---|
| وحدات التواصل المرئي للمكاتب | أجهزة | 1 | الكمية المتوقعة 45 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Desk Pro. • CONSSSNT- Desk Pro SOLN SUPPORT 8X5XNBD 36. • PWR-CORD-GBR-B Power Cord for United Kingdom 2m 10A . • CS-PWR-CUBE-7- Power transformer for the Desk Pro series . • CABUSBC-1.8MUSBC - USB C Cable, 1.8 meters long . • CAB-2HDMI-1.5M-GR- 1.5m GREY HDMI 2.0 . • CSDESKPRO- STYLUS- Desk Pro Stylus . • CAB-ETH-3M-GR- CAB 3m GREY ETHERNET . • CSDESKPRO-STAND- Desk Stand & Connector Cover for. Desk Pro Series . • CS-DESKPROFG- Fabric Speaker Grille for Desk Pro Series. | عدد | 1 | 0 | |
| نظام الجدار الناري 1 | أجهزة | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. . • GB SSD,2XPower Supply,. • Premium support 3 240 ,(8) years, Advanced Threat 3. • years,4X SFP form factor, SX 1Gb optical transceiver,. • 550m reach on OM2 MMF, duplex LC, IEEE 802.3z. • 1000BASE-SX compliant. Threat Prevention throughput. • 5.0/4.8 Gbps, Max tunnels 1500. • All passiverequirement to be installed in the data center and. • connected to the existing informant should be included. • such as but not limited to, Patch Cores, Patch Panels,. • Casets, SFPS, and Rack Trays, Cables (UTP and Fiber),. • Rack Shelves and other necessary components.. • All required HW and SW licenses and should not be activated until installation is completed. | عدد | 2 | 0 | |
| شاشات الاتصال المرئي 75 بوصة | أجهزة | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. . Fully integrated main unit is delivered with:. • Multitouch 75-inch 4k LCD display. • 2 x 4k cameras – wide and main field of view. • 12 element second-generation microphone array. • Integrated speakers and woofer . • 2 active stylus pens . • Floor stand . • Ethernet cable (16,4 feet/5 meters) . • Resolution: 4k UHD (3840x2160) /16:9). • Display type: IPS LCD. . • Display size in inches: 55” or 75” . • Luminance: Typ 350 cd/m2 . • Viewing angle: +/- 89 degrees (all directions) . • Number of colors: 1.07 billion (10bit) . • Contrast: 1:1000 . • Response Time: 8ms . • Dual 4k, 12MP cameras . • 85° horizontal field of view, 64° vertical field of view . • Dual f/1.7-f/2.4 aperture . • 12 MP image sensor, 30 fps • Focus distance: 0.8m to infinity . •1/2.3” CMOS, PDAF technology . • Video Inputs: . USBC. DisplayPort Alternate Mode up to 3840 x 2160p60. (4kp60) . HDMI 2.0 type A input supports formats up to. 3840 x 2160p30 (4kp30) . • Video Outputs: . HDMI 2.0 type A up to 3840 x 2160p60 (4kp60) for screen. mirroring, content and live video display . . • Vendor Support: 36 months 8x5xNBD. | عدد | 3 | 0 | |
| شاشات الاتصال المرئي 55 بوصة | أجهزة | 1 | الكمية المتوقعة 40 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. . CSBRD55PK9 Cisco Webex Board Pro 55 35CONSSSNTCS5PK9BR . Cisco Webex Board Pro 55 SOLNSUPP 8X5XNBD 36 months 35. CSBRD55PFS Cisco WebexBoard Pro 55 Floor stand 35. PWRCORDGBRF Power Cordfor United Kingdom 5m 10A 35. CABHDMIMUL4K9MCisco Multihead Cable 9 meters 4K, USBC, HDMI, miniDP35. CSMICTABLEJ Cisco Table Microphone with Jack plug70. CONSSSNTCS5HEJMI Cisco Table Microphone with Jack plug SOLN SUPP 8X5XNBD 36 months 70CSBRDPACTSTYL+ Cisco Webex Board Pro Active Stylus35. CSBRDPLFTHNDL Webex Board Pro Lifting Handles 35CST10TSK9= Cisco Webex Room Navigator Table stand version Spare 35. CONSNTCS6MK9T1 Cisco Webex Room Navigator Table stand version SNTC8X5XNB 36 months35. | عدد | 4 | 0 | |
| نظام الجدار الناري 2 | أجهزة | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product • Should be provided . توريد نظام الجدار الناري with Next Generation Firewall licenses for. • IPS, Advanced Malware Protection, Application Control Service and Web Filtering. • Should be supplied with 10 Virtual System / VDOM / Security context licenses. This is essential for the implementation.. • The device should support both Explicit Proxy and Transparent Proxy along with all NGFW features simultaneously on the same appliance without any compromise.. • The solution should support advanced SDWAN features to aggregate multiple WAN interfaces,. measure application performance among the links and selecting best exit interface for traffic using measured SLAs without additional license. The SDWAN feature shall fully support IPv4 as well as IPv6. • The SDWAN feature should support both passive WAN health measurement through synthetic transactions and active WAN health measurement through monitoring application session information . • Should support both SSL certificate inspection and full SSL inspection.. • Solution should support TLS 1.1, 1.2 and 1.3 deep inspection. • The solution must support native integration with similar products to form a fabric to share visibility, share threat intelligence and automate response.. • The device must have APIs.. • It should have inbuilt feature of Two-Factor Authentication (2FA) for SSL-VPN and for Admin login, without needing a separate software/hardware to deploy the solution. . • The system must have the ability to integrate with external threat feeds and IP reputation sources from both public and private sources. • The proposed system shall provide robust visibility GUI panels and dashboards.. • Should support HTML5 based Web UI. The Web UI should not have any Java, Flash or ActiveX components as these components can pose considerable security threats due to frequent vulnerabilities and end-of-support notices.. • The proposed system shall provide administrators ability to assign arbitrary score given based on the perceived risk of certain events such as visit to malicious websites and malware detection.. • Should be able to send logs simultaneously to existing Centralized logging appliance, multiple. Syslog servers and SIEM solutions. The proposed solution should be leader in last Gartner Network Firewall.. The proposed solution should be leader in last Gartner WAN Edge Infrastructure.. The proposed solution should be integrated with any authentication and identification platform. and support at minimum; Active Directory, LDAP, RADIUS, TACACS+.. • Products and licenses must come with 3 years 24x7 highest Support with Technical Account Manager TAM All passive requirement to be installed in the data center and connected to the existing informant should be included such as but not limited to, Patch Cores, Patch Panels, Casets, SFPS, and Rack Trays, Cables (UTP and Fiber), Rack Shelves and other necessary components.. • All required HW and SW licenses and should not be activated until installation is completed. | عدد | 5 | 0 | |
| وحدات الاتصال المرئي الطرفية | أجهزة | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. . Room Kit Pro . Codec, Quad Cam, Room Navigator . GPL Room Kit Pro . Codec,Quad Cam, Room Navigator . GPL SNTC- 8X 36 months . • CS-CODEC-PRO+ Codec Pro for Auto Expand . • CS-QUADCAM+. Quad Camera . • PSU-12VDC-70W-GR+. Powersupply - AC/DC, 12V, 6.25A, grey . •BRKT-QCAM-WMKWall mounting. bracket for Quad Camera . • CABDV10-8M+ Network cable (ethernet) 8 meter . •CSCPRO-ANT+ Antennas for Codec Pro . •CS-T10- TS + Room Navigator . - Table stand version . • PWR-CORD-GBR-B Power Cord for United Kingdom 2m 10A. • 2X CS-MIC-TABLE-E Table Microphone with Euroblock plug . • 3X CON-SNTCS4GEEMI. Table Microphone with Euroblock plug SNTC8X5XNBD. 36 months 240 CAB-MIC-EXT-E Extension cable for the Table Microphone (9m/29ft). wit . • 3X CSCPRO-WMK Wall Mount Kit. for Codec Pro. • CSCAM-PTZ4K Pan-Tilt-. Zoom 4K 20x camera. • 2X CON-SNTCS1F4KCA. Pan-Tilt-Zoom 4K 20x. .camera SNTC-8X5XNBD 36 months. | عدد | 6 | 0 | |
| موزع شبكي B1 | أجهزة | 1 | الكمية المتوقعة 25 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Below are the required specs for 24 POE+ (100M, 1G) Access Switch. • Support with up to 445 watts of power (without an external power source).. • 8*10 uplinks SFP. • Allowing stacking of up to 8 switches and 480 Gbps bandwidth.. • Switches offer QoS and intelligent traffic management that keeps everything flowing smoothly.. • Flexible mechanisms for marking, classification, and scheduling help deliver high performance for data, voice, and video traffic.. • MAC-based VLAN assignment. . • Support TrustSec. • Comprehensive 802.1X Features including Flexible Authentication, 802.1x Monitor Mode, and RADIUS Change of Authorization.. • IPv6 First-Hop Security. • Device Sensor and Device Classifier.. • Threat Defense features including Port Security, Dynamic ARP Inspection, and I Source Guard.. • Multidomain Authentication. • Switched Port Analyzer TACACS+ and RADIUS. • (SPAN) authentication. • MAC Address Notification. • Bridge protocol data unit (BPDU) Guard. • Spanning Tree Root Guard (STRG) . • IGMP filtering. • Dynamic VLAN assignment. • IP routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, and RIPng, Full [OSPF], Enhanced Interior Gateway Routing Protocol , Border Gateway Protocol Version 4 [BGPv4], and. • Intermediate System-to-Intermediate System Version 4 [IS-ISv4]) are supported for load balancing and for constructing scalable LANs.. • VRF, VXLAN, LISP, Secure Group policy and MPLS. • IPv6 routing (using OSPFv3 and BGPv6) is supported in hardware for maximum performance.. • Protocol-Independent Multicast (PIM) for IP multicast routing is supported, including PIM Sparse Mode (PIM SM), and Source-Specific Multicast(SSM).. • IPv6 addressing is supported on interfaces with appropriate show commands for monitoring and. • troubleshooting.. • Support Audio Video Bridging (AVB). • Patch life cycle management . • Application Health, performance (Loss, Jitter and Latency). • Application policy. • Support NMS and NAC from the same vendor as per existing setup. • All the required features must be supported from day one on general software release (no custom coding to add the features will be accepted). • Switches must support the option of adding SSD drive whenever needed. • The platform must support API Configuration, automated device provisioning, Seamless software upgrade and patching.. • The platform must support high level of security feature including AES-256 MACSEC encryption, Image signing and secure boot.. • Redundant Power supplies is a must. . • Stack module including required cables is a must . • Stack power technology must supported and stack power cable must be included. • Vendor Support: 36 months of support and next day HW replacement from the manufacturer Description. • Performance Switching capacity 208 Gbps on 24-port Gigabit Ethernet model. • Switching capacity with stacking 688 Gbps. • Stacking bandwidth 480 Gbps Total. • number of MAC addresses 32,000 Total. • number of IPv4 routes (ARP plus learned routes) 32,000 (24,000 direct routes and 8000 indirect routes) IPv4 routing entries 32,000 IPv6 routing entries 16,000. • Multicast routing scale 8000 QoS scale entries 5120 ACL scale entries 5120. • Packet buffer per SKU 16 MB buffer FNF. • entries 64,000 flow DRAM 8 GB Flash 16GB VLAN IDs 4094 Total Switched. • Virtual Interfaces (SVIs) 1000 Jumbo. • frames 9198 bytes Total routed ports per stack 448 Forwarding rate 154.76 Mpps. | عدد | 7 | 0 | |
| موزع شبكي B2 | أجهزة | 1 | الكمية المتوقعة 25 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Below are the required specs for 48 port internet gateway switches with SFP/SFP+ support 1/10/25G with four ports 40/100G uplinks ports.. • (UADP) 3.0 Application-Specific Integrated Circuit (ASIC) ready for next-generation technologies with its programmable pipeline, micro engine capabilities, and template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and QoS entries . • 2.4-GHz x86 CPU with up to 960GB of USB 3.0 SSD storage for container-based application hosting -Up to 2Tbps switching capacity - Up to 1Bpps forwarding rate -Platinumrated. AC power supplies -Up to 98,000 Flexible NetFlow (FNF) entries in. • Hardware. • Up to 36 MB of unified buffer per ASIC -Up to 212,000 routing entries for high-end campus access and aggregation deployments. • Layer 3 Capabilities include BGP, EIGRP, HSRP, IS-IS, BSR, MSDP, PIM SM, PIM SSM, PIM-BIDIR, IP SLA, and OSPF from day one with maximum capability.. • IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks -Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration . • The bidder should include single mode SFP 10/25G -. • The bidder should include two SFPs single Mode 100G.. • Support for both static and dynamic NAT and Port Address Translation (PAT). • Scalable routing (IPv4,IPv6, and multicast) tables and Layer 2 Tables. • Open Operating System design as a modern operating system for the enterprise with support for model-driven programmability, on-box Python scripting, streaming telemetry, container-based. application hosting, and patching for critical bug fixes.. The OS also has built-in defenses to protect against runtime attacks. • support virtual technology, a network system virtualization technology that increases operational efficiency and boosts nonstop communications and scaled system bandwidth. • Advanced security: Encrypted Traffic Analytics (ETA): You benefit from the power of machine learning to identify and take actions toward threats or anomalies in your network, including malware detection in encrypted traffic and distributed anomaly detection.Additionally, ETA can detect vulnerableimplementations in encrypted traffic. • Support for AES-256 with the powerful. • MACsec 256-bit encryption algorithm available on all models oTrustworthy. • systems: Secure Unique Device. • Identification (SUDI) support for Plug and Play, enabling tamper-proof device identity. capability, which secures zero-touch provisioning by allowing your device to show a certificate to the server to be able to get onto your network oSupport NMS and NAC from the same vendor. • Include minimum required Subscription to enable OSPF with a maximum capability of the switch . • Vendor Support: 36 months of support and next day HW replacementfrom the manufacturer . • Switching capacity Up to 2 Tbps full duplex. • Forwarding rate Up to 1Bpps. • Total number of MAC addresses Up to 82,000 •. • Total number of IPv4 routes (Address Resolution Protocol [ARP] plus learned routes) Up to 256,000 indirect/direct. • Total number of IPv6 routes Up to 256,000 indirect/direct. • Multicast scale Up to 32,000 . • QoS ACL scale Up to 16000 . • Security ACL scale Up to 27000 . • FNF entries Up to 98,000. • DRAM 16 GB . • Flash 16 GB . • VLAN IDs 4094 . • Total Switched Virtual Interfaces (SVIs) 1000 . • Jumbo frame 9216 bytes. | عدد | 8 | 0 | |
| موجه شبكي B | أجهزة | 1 | الكمية المتوقعة 25 | . Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • The maximum Throughput of the model with the AES-256 IPSec encryption shouldbe at least 1.9 Gbps (1400 bytes,ClearText). • The proposed solution should contain the license for 400Mbps aggregated bandwidth. • Must have built-in 2 x WAN Fiber ports (1G SFP). • Must have built-in 4xWAN ports, 1G copper.. • The Router must be shipped with 1 SFP 1G single Mode.. • Support one service modules and one network interface Modules. • The Router must support voice ports FXO whenever needed.. • The router must be shipped with required license to enable voice.. • Support at least 6000 SDWAN Overlay tunnels.. • The Router should support up to 19.7Gbps for non-SDWAN. • IPv4 forwarding throughput.. • Support up to 6000 IPSEC Tunnels. • Support Cat18 Module for advanced LTE and 5G ready for the future.. • Support Console Management via RJ45. • Must be 1RU.. • The redundant Power supply is a must.. • Support Dynamic routing: OSPF,BGP with the controller feature's functionality.. • Support Routing table entry of 4M routes for IPv4 and IPv6 with a memory upgrade.. • IPSec Connection with AES-256 bit . • Support VRRP Gateway Redundancy . • Support Forward ErrorCorrection (FEC) both packet parity and packet duplication. • Support NAT. • Support multicast functionality Auto-RP or Static RP and IGMPv1 and IGMPv2. • Support TACAC+, Radius for authentication to the device.. • Support 802.1Q Encapsulation. • Support IPv6 both LAN and WAN interface.. • QoS functionality support. Application Control, Shaping, and policing, DSCP Marking,. • Rewrite with 16K queues.. • Support MACSEC and SYNCE on all the ports.. • Support Centralized control through the. • SDWAN Controller. • Firewall session up to 512K.. • Up to 2 million NAT Sessions with memory upgrade . • Vendor Support: 36 months of support and next day HW replacement from the manufacturer. يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني | عدد | 9 | 0 | |
| موزع شبكي Core متوسط PC | أجهزة | 1 | الكمية المتوقعة 15 | Overall Requirements Performance. Switching capacity Up to 2 Tbps full duplex. Forwarding rate Up to 1Bpps. Total number of MAC addresses Up to 82,000. Total number of IPv4 routes (Address Resolution Protocol [ARP] plus learned routes) Up to 256,000 indirect + direct. Total number of IPv6 routes Up to 256,000 indirect + direct. Multicast scale Up to 32,000. QoS ACL scale Up to 16000. Security ACL scale Up to 27000. FNF entries Up to 256,000. DRAM 16 GB. Flash 16 GB. VLAN IDs 4094. Total Switched Virtual Interfaces (SVIs) 4,000. Jumbo frame 9216 bytes. Capacity . Port quantity 24 Ports Fiber SFP+ downlink. Port types 24p x 10/25G SFP fiper. Required Uplink Ports Fixed Uplink support four ports 40/100G . . Target deployments Large Branches. Stacking Virtual Stack. Advanced security and analytics Yes. License Yes - Advantage level. Networking . Advanced switching Layer 2/3. Jumbo frame support 9216 bytes. MAC address table size 82k entries. Power . Power redundancy YES. Power redundancy scheme 1+1. Power provided 650-1600W. Nominal voltage AC 120/230V; DC -36/-72V. Environment . Humidity range operating 5-95% (noncondensing). Operating temperature -5°C to +45°C. Storage temperature -40° to 70°C. Form Factor . Configuration Fixed. Height (rack units) 1 RU. Depth 18 in. Height 1.73 in. Width 17.5-21.5 in. Weight Up to 20.99 lb. . Security . Encrypted Traffic Analytics Yes. Trustworthy systems Yes. Encryption protocols AES-256/MACsec-256, SSH, TLS, IPsec. MPLS Yes. IGMP snooping Yes. NetFlow Yes. Special Requirements . VSL QSF Two tranceievers 40/100G MM LC connector. Dual Active Detection 1 SFP 10/25G MM LC Connector. Programmability . NETCONF/YANG Yes. Python Yes. Containers Yes. Support . Required Support LEVEL 1 8X5XNBD 3 Years. | عدد | 10 | 0 | |
| موزع شبكي Core كبير PC | أجهزة | 1 | الكمية المتوقعة 6 | Overall Requirements Performance. Switching capacity Up to 3.2 Tbps full duplex. Forwarding rate Up to 1Bpps. Total number of MAC addresses Up to 82,000. Total number of IPv4 routes (Address Resolution Protocol [ARP] plus learned routes) Up to 256,000 indirect + direct. Total number of IPv6 routes Up to 256,000 indirect + direct. Multicast scale Up to 32,000. QoS ACL scale Up to 16000. Security ACL scale Up to 27000. FNF entries Up to 256,000. DRAM 16 GB. Flash 16 GB. VLAN IDs 4094. Total Switched Virtual Interfaces (SVIs) 4,000. Jumbo frame 9216 bytes. Capacity . Port quantity 48 Ports Fiber SFP+ downlink. Port types 48p x 10/25G SFP fiper. Required Uplink Ports Fixed Uplink support four ports 40/100G . . Target deployments Large Branches. Stacking Virtual Stack. Advanced security and analytics Yes. License Yes - Advantage level. Networking . Advanced switching Layer 2/3. Jumbo frame support 9216 bytes. MAC address table size 82k entries. Power . Power redundancy YES. Power redundancy scheme 1+1. Power provided 650-1600W. Nominal voltage AC 120/230V; DC -36/-72V. Environment . Humidity range operating 5-95% (noncondensing). Operating temperature -5°C to +45°C. Storage temperature -40° to 70°C. Form Factor . Configuration Fixed. Height (rack units) 1 RU. Depth 18 in. Height 1.73 in. Width 17.5-21.5 in. Weight Up to 20.99 lb. . Security . Encrypted Traffic Analytics Yes. Trustworthy systems Yes. Encryption protocols AES-256/MACsec-256, SSH, TLS, IPsec. MPLS Yes. IGMP snooping Yes. NetFlow Yes. Programmability . NETCONF/YANG Yes. Python Yes. Containers Yes. Special Requirements . VSL QSF Two tranceievers 40/100G MM LC connector. Dual Active Detection 1 SFP 10/25G MM LC Connector. Support . Required Support LEVEL 1 8X5XNBD 3 Years. | عدد | 11 | 0 | |
| موزع شبكي Core متوسط SC | أجهزة | 1 | الكمية المتوقعة 3 | . Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • S6730-H24X6C (24*10GE SFP+ ports,PoE+,6 x 40/100 GE QSFP28) S67XX-S Series Basic SW,Per Device. • 1000W AC&240V DC Power Module (Back to Front,Power panel side exhaust). • Switching Capacity: 1.68Tbps/2.4 Tbps. • Dimensions (H x W x D): 1U (4 3.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.). • S6730-H24X6C (48*10/100/1000BASE-T ports,4*10GE SFP+ ports,PoE+,without power module)_Hi-Care Standard S6730-H24X6C _36Month(s). • Dual power supply. • 3 Years Full Warranty. يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني | عدد | 12 | 0 | |
| موزع شبكي ب24 منفذ SS | أجهزة | 1 | الكمية المتوقعة 3 | . Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • S5731-S24P4X (24*10/100/1000BASE-T ports,4*10GE SFP+ ports,PoE+,without power module. • S57XX-S Series Basic SW,Per Device. • 1000W AC&240V DC Power Module (Back to Front,Power panel side exhaust). • S5731-S24P4X (24*10/100/1000BASE-T ports,4*10GE SFP+ ports,PoE+,without power module). • Hi-Care Standard S5731-S24P4X_36Month(s). • Dual power supply. • 3 Years Full Warranty. يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني | عدد | 13 | 0 | |
| موزع شبكي ب24 منفذ PS | أجهزة | 1 | الكمية المتوقعة 1052 | Performance. Switching capacity 56 Gbps. Stacking bandwidth 320G. Total number of MAC addresses 32,000. Total number of IPv4 routes (ARP plus learned routes) 32,000. IPv4 routing entries 32,000. IPv6 routing entries 16,000. Multicast routing scale 8,000. QoS scale entries 5,120. ACL scale entries 5,120. Packet buffer per SKU 16 MB buffer . FNF entries 64,000 flows. DRAM 8 GB . Flash 16 GB . VLAN IDs 4000. Total Switched Virtual Interfaces (SVIs) 1000. Jumbo frames 9198 bytes. Forwarding rate 41.66 Mpps. Total routed ports per stack 416. Capacity . Port quantity 24 Ports PoE+ downlink. Port types 4X1G FIXED. Required Uplink Ports - Fixed 4 x 1G SFP. Key Features . Target deployments Designed for small-to-medium enterprises, branch offices, and campus environments. Stacking Yes, Up to 8 switches per stack - Modular Stack . Advanced security and analytics Yes Encrypted Traffic Analytics (ETA), Secure Boot, Trust Anchor, and analytics.. ADVANCED POWER STACKING NO. License Yes – Essential level. Networking . Advanced switching VXLAN, EVPN, OSPF, BGP, ISIS.. Jumbo frame support Yes. Native wireless support Yes, Integrated wireless controller supporting up to 200 APs and 4,000 clients.. Power . Integrated PoE Yes, with IEEE 802.3at (PoE+) . PoE/PoE+ No. PoE budget 505W with single primary power. 720W with additional secondary power supply. Power redundancy Yes. Power redundancy scheme 1+1. Nominal voltage AC 100/240V. Environment . Humidity range operating 5% to 95% noncondensing.. Operating temperature -5°C to 45°C (23°F to 113°F). Storage temperature -40°C to 70°C (-40°F to 158°F).. Form factor . Configuration Fixed downlinks. Uplink Type Fixed uplinks. Height (rack units) 1 RU. Depth 17.7 inches (45 cm).. Height 1.73 inches (4.4 cm).. Width 17.5 inches (44.5 cm).. Security . Encrypted Traffic Analytics Yes. Trustworthy systems Yes. Encryption protocols AES-256/MACsec-256, SSH via lic upgrade. MPLS Yes. IGMP snooping Yes. Flexible NetFlow Yes. Programmability . NETCONF/YANG Yes. Python Yes. Containers No. Support LEVEL 1 8X5XNBD 3 Years. | عدد | 14 | 0 | |
| موزع شبكي Core صغير PC | أجهزة | 1 | الكمية المتوقعة 25 | Overall Requirements Performance. Switching capacity 208 Gbps. Stacking bandwidth 480 Gbps. Total number of MAC addresses 32,000. Total number of IPv4 routes (ARP plus learned routes) 32,000 (24,000 direct routes and 8000 indirect routes) . IPv4 routing entries 32,000. IPv6 routing entries 16,000. Multicast routing scale 8000. QoS scale entries 5120. ACL scale entries 5120. Packet buffer per SKU 16 MB buffer . FNF entries 64,000 flow . DRAM 8 GB . Flash 16 GB . VLAN IDs 4094. Total Switched Virtual Interfaces (SVIs) 1000. Jumbo frames 9198 bytes. Total routed ports per stack 448. Forwarding rate 154.76 Mpps. Capacity . Port quantity 24 Ports Fiber SFP downlink. Port types 24p x 1G SFP fiper. Required Uplink Ports 8 X 10 SFP+ - Modular Uplink. Key Features . Target deployments Branch to mid-sized enterprise. Stacking Yes. Advanced security and analytics Yes. License Yes - Advantage level. Networking . Advanced switching Layer 2/3. Jumbo frame support 9198 bytes. Native wireless support Yes. Power . Power redundancy Yes. Power redundancy scheme 1+1. Power provided none. Nominal voltage AC 100/240V. Environment . Humidity range operating 10-95% (noncondensing). Operating temperature -5°C to +45°C. Storage temperature -40° to 70°C. Form factor . Configuration Fixed downlinks. Uplink Type Modular uplinks. Height (rack units) 1 RU. Depth 17.7 in. Height 1.73 in. Width 17.5 in. Weight 16.84 lb. Security . Encrypted Traffic Analytics Yes. Trustworthy systems Yes. Encryption protocols AES-256/MACsec-256, SSH, TLS, IPsec. MPLS Yes. IGMP snooping Yes. NetFlow Yes. Programmability . NETCONF/YANG Yes. Python Yes. Containers Yes. Support . Required Support LEVEL 1 8X5XNBD 3 Years. | عدد | 15 | 0 | |
| موزع شبكي ب48 منفذ PS | أجهزة | 1 | الكمية المتوقعة 412 | Performance. Switching capacity 176 Gbps. Stacking bandwidth 320G. Total number of MAC addresses 32,000. Total number of IPv4 routes (ARP plus learned routes) 32,000. IPv4 routing entries 32,000. IPv6 routing entries 16,000. Multicast routing scale 8,000. QoS scale entries 5,120. ACL scale entries 5,120. Packet buffer per SKU 16 MB buffer . FNF entries 64,000 flows. DRAM 8 GB . Flash 16 GB . VLAN IDs 4000. Total Switched Virtual Interfaces (SVIs) 1000. Jumbo frames 9198 bytes. Forwarding rate 130.95 Mpps. Total routed ports per stack 416. Capacity . Port quantity 48 PoE+ downlink ports. Port types 4 x 1G SFP fixed uplinks. Required Uplink Ports - Fixed 4 x 1G SFP. Key Features . Target deployments Designed for small-to-medium enterprises, branch offices, and campus environments. Stacking Yes, Up to 8 switches per stack - Modular Stack . Advanced security and analytics Yes Encrypted Traffic Analytics (ETA), Secure Boot, Trust Anchor, and analytics.. ADVANCED POWER STACKING NO. License Yes – Essential level. Networking . Advanced switching VXLAN, EVPN, OSPF, BGP, ISIS.. Jumbo frame support Yes. Native wireless support Yes, Integrated wireless controller supporting up to 200 APs and 4,000 clients.. Power . Integrated PoE Yes, with IEEE 802.3at (PoE+) . PoE/PoE+ Yes. PoE budget 505W with a single primary power supply, up to 1220W with an additional secondary power supply. Power redundancy Yes. Power redundancy scheme 1+1. Nominal voltage AC 100/240V. Environment . Humidity range operating 5% to 95% noncondensing.. Operating temperature -5°C to 45°C (23°F to 113°F). Storage temperature -40°C to 70°C (-40°F to 158°F).. Form factor . Configuration Fixed downlinks. Uplink Type Fixed uplinks. Height (rack units) 1 RU. Depth 19.2 inches (48.8 cm).. Height 1.73 inches (4.4 cm).. Width 17.5 inches (44.5 cm).. Security . Encrypted Traffic Analytics Yes. Trustworthy systems Yes. Encryption protocols AES-256/MACsec-256, SSH via lic upgrade. MPLS Yes. IGMP snooping Yes. Flexible NetFlow Yes. Programmability . NETCONF/YANG Yes. Python Yes. Containers No. Support LEVEL 1 8X5XNBD 3 Years. | عدد | 16 | 0 | |
| موزع شبكي ب48 منفذ SS | أجهزة | 1 | الكمية المتوقعة 3 | . Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • S5731-S48P4X (48*10/100/1000BASE-T ports,4*10GE SFP+ ports,PoE+,without power module) S57XX-S Series Basic SW,Per Device. • 1000W AC&240V DC Power Module (Back to Front,Power panel side exhaust). • S5731-S48P4X (48*10/100/1000BASE-T ports,4*10GE SFP+ ports,PoE+,without power module). • Hi-Care Standard S5731-S24P4X_36Month(s). • Dual power supply. • 3 Years Full Warranty. يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني | عدد | 17 | 0 | |
| موجه شبكي كبير | أجهزة | 1 | الكمية المتوقعة 60 | Form Factor . Rack vs. desktop Rack. Optional hardened form factor No. Height 3.5 in/8.89 cm. Width 17.25 in/43.82 cm. Depth 18.52 in/47.04 cm. Weight 40 lb/18.14 kg. NEBS compliant Yes. FIPS compliant Yes. Fanless No. . Power . Power supply type Dual power supplies. Redundant power supply Yes. PoE support (wattage) 500W. DC power Yes, optional DC power supplies available. . Voice Support . Local conferencing Yes No. Digital signal processor Yes, supported via NIM modules. Cisco Unified Survivable Remote Site No. Telephony No. Cisco Unified Communications No. Call Manager Express Yes, via specific modules.. Cisco Unity Express No. Cisco Unified Border Element Yes. Digital voice and video No. Analog/BRI voice Yes, supported via NIM modules.. . Security . Intrusion prevention Yes. Support Secure Internet Gateway (SIG) Yes. Cloud Web Security No. Encrypted Traffic Analytics Yes. Cisco TrustSec Yes. WAN MACsec Yes. IPsec tunnels Yes, up to 4,000 tunnels.. SSL VPN Yes. DMVPN Yes. FlexVPN Yes. GETVPN Yes. Content filtering Yes. NAT Yes. CGN No. Zone-based firewall Yes. Hardware VPN acceleration Yes, integrated. . Connectivity . Built-in ports 4 x 1G RJ-45 Ethernet ports.. 2 x 10G SFP+ ports.. 802.11 wireless No. Layer 3 switch module Supported via NIMs and SMs.. Maximum switched Ethernet ports 66. Maximum switched Ethernet LAN ports with POE 66. SHDSL Yes. Fiber Yes. Dedicated PIM for 4G / 5G 1. Serial Yes. Network interface modules 2. Enhanced services modules 2. Ethernet Yes. Total built-in ports 6. MAX Built-in GE ports 4. MAX Built-in 10GE ports 2. MAX Built-in 40GE ports 0. MAX Built-in 100GE ports 0. VDSL2/ADSL2+ Yes, supported via NIMs. . Network Services . SD-WAN Cisco SD-WAN. Module online insertion and removal (OIR) Yes. SD-Routing Yes. WAN optimization Yes. AppNAV Yes. Application Visibility and Control Yes. Segment routing No. Multicast routing protocols Yes. Ethernet VPN (EVPN) No. IPv6 support Yes. OTV No. Hardware Services . Management Ethernet Yes. Console port Yes. USB ports Yes. Container services Yes. Voice functionality Yes. Compute module Yes. Server virtualization Yes. . Key Features . Target deployments Large Branch. SD-WAN IPsec Throughput (Internet MIX) Up to 7.6 Gbps. SD-WAN Overlay Tunnels scale 6000. SD-WAN software Cisco SD-WAN. Special Requirement . SFP 1 SFPs 10G SM (10Km distance) + 2 SFP 10G MM (500m distance). 5G Module to be included No. Required NIM Module 1X ( additional 1 ports 10G SFP+). Required SM Module Blank cover. Required Bandwidth Tier 3 - upto 10 Gbps advantage . Support . Required Support LEVEL 1 8X5XNBD 3 Years. | عدد | 18 | 0 | |
| موجه شبكي متوسط | أجهزة | 1 | الكمية المتوقعة 300 | Form Factor . Rack vs. desktop Rack. Optional hardened form factor No. Height 1.73 in/43.9 mm. Width 17.5 in. Depth 16.25 in/412.75 mm. Weight 20 lb/9.1 kg. NEBS compliant No. FIPS compliant Yes. Fanless No. . Power . Power supply type Dual power supplies. Redundant power supply Yes. PoE support (wattage) Up to 250W PoE budget. DC power Yes, optional DC power supplies available. . Voice Support . Local conferencing No. Digital signal processor Yes, supported via NIM modules. Cisco Unified Survivable Remote Site No. Telephony No. Cisco Unified Communications No. Call Manager Express Yes, via specific modules.. Cisco Unity Express Yes. Cisco Unified Border Element Yes. Digital voice and video No. Analog/BRI voice Yes, supported via NIM modules.. . Security . Intrusion prevention Yes. Support Secure Internet Gateway (SIG) Yes. Cloud Web Security No. Encrypted Traffic Analytics Yes. Cisco TrustSec Yes. WAN MACsec Yes. IPsec tunnels Yes, up to 4,000 tunnels.. SSL VPN Yes. DMVPN Yes. FlexVPN Yes. GETVPN Yes. Content filtering Yes. NAT Yes. CGN No. Zone-based firewall Yes. Hardware VPN acceleration Yes, integrated. . Connectivity . Built-in ports 6 x 1 GE ( 4x RJ-45 and 2 x SFP). 802.11 wireless No. Layer 3 switch module Supported via NIMs and SMs.. Maximum switched Ethernet ports 30. Maximum switched Ethernet LAN ports with POE 28. SHDSL Yes, supported via NIM modules. Fiber Yes. Dedicated PIM for 4G / 5G 1. Serial Yes. Network interface modules 1. Enhanced services modules 1. Ethernet Yes. Total built-in ports 6. MAX Built-in GE ports 6. MAX Built-in 10GE ports 0. MAX Built-in 40GE ports 0. MAX Built-in 100GE ports 0. VDSL2/ADSL2+ Yes, supported via NIMs. . Network Services . SD-WAN Cisco SD-WAN. Module online insertion and removal (OIR) Yes. SD-Routing Yes. WAN optimization Yes. AppNAV Yes. Application Visibility and Control Yes. Segment routing No. Multicast routing protocols Yes. Ethernet VPN (EVPN) No. IPv6 support Yes. OTV No. Hardware Services . Management Ethernet Yes. Console port Yes. USB ports Yes. Container services Yes. Voice functionality Yes. Compute module Yes. Server virtualization Yes. . Key Features . Target deployments Medium/Large Branch. SD-WAN IPsec Throughput (Internet MIX) Up to 1.8 Gbps. SD-WAN Overlay Tunnels scale 6000. SD-WAN software Cisco SD-WAN. Special Requirement . SFP 2 SFPs 1G SM (10Km distance). 5G Module to be included No. Required NIM Module Blank cover. Required SM Module Blank cover. Required Bandwidth Tier 1 - upto 200 Mbps advantage . Support LEVEL 1 8X5XNBD 3 Years. | عدد | 19 | 0 | |
| كرت لموزع اجهزة الشبكة من 8 منافذ | أجهزة | 1 | الكمية المتوقعة 6 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Catalyst 9300 8 x 10GE Network Module (C9300-NM-8X). • 3 Years Warranty. | عدد | 20 | 0 | |
| وحدة الارسال والاستقبال SFP GLC ZX SM | أجهزة | 1 | الكمية المتوقعة 4 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • GLC-ZX-SM Compatible 1000BASE-ZX SFP Single Mode. • Speed: 1G to 1.2G UTP. • 3 Years Warranty. | عدد | 21 | 0 | |
| موجه شبكي صغير | أجهزة | 1 | الكمية المتوقعة 400 | Form Factor . Rack vs. desktop Rack. Optional hardened form factor No. Height 1.73 in/43.9 mm (1RU). Width 17.25 in/438.15mm. Depth 11.8 in/299.72mm. Weight 10 lb/4.5 kg. NEBS compliant Yes. FIPS compliant Yes, FIPS 140-2 Level 1 certified.. Fanless No. . Power . Power supply type Internal fixed AC. Redundant power supply No. PoE support (wattage) Yes, Optional. DC power Yes, optional DC power supply. . Voice Support . Local conferencing No. Digital signal processor Yes, supported via NIM modules. Cisco Unified Survivable Remote Site Yes. Telephony No. Cisco Unified Communications No. Cisco Unity Express No. Cisco Unified Border Element No. Nano Cisco Unified Border Element No. Digital voice and video No. Analog/BRI voice Yes, supported via NIM modules.. . Security . Intrusion prevention Yes. Cisco Umbrella Branch No. Cisco Cloud Web Security No. Encrypted Traffic Analytics Yes. Cisco TrustSec Yes. WAN MACsec Yes, supports 256-bit MACsec. IPsec tunnels Yes, supports up to 2,500 tunnels.. SSL VPN Yes. DMVPN Yes. FlexVPN Yes. GETVPN Yes. Content filtering Yes. NAT Yes. CGN No. Zone-based firewall Yes. Hardware VPN acceleration Yes, Integrated. . Connectivity . Built-in ports 4 x GE WAN ports (2 x RJ-45 and 2 x SFP). 802.11 wireless No. Layer 3 switch module No. Maximum switched Ethernet ports Up to 8 ports via NIMs. Maximum switched Ethernet LAN ports with POE 8 Ports with up to 150W - Supported but not required. SHDSL Yes. Fiber Yes. Dedicated PIM for 4G / 5G Yes. Serial Yes. Network interface modules 1. Enhanced services modules 0. Ethernet Yes. Total built-in ports 4. Built-in GE ports 4. Built-in 10GE ports No. Built-in 40GE ports No. Built-in 100GE ports No. VDSL2/ADSL2+ Yes, supported via NIMs. . Network Services . SD-WAN Cisco SD-WAN. Module online insertion and removal (OIR) Yes. SD-Access Yes. WAN optimization No. AppNAV No. Application Visibility and Control Yes. Segment routing No. Multicast routing protocols Yes. Overlay Transport Virtualization (OTV) No. IPv6 support Yes. . Hardware Services . Management Ethernet Yes. Console port Yes. USB ports Yes. Container services Yes. Voice functionality Yes. Compute module No. Server virtualization No. . Key Features . Target deployments Small and Medium Branches. SD-WAN IPsec Throughput (Internet MIX) Up to 900Mbps. SD-WAN Overlay Tunnels scale 2500. SD-WAN software Cisco SD-WAN. Special Requirement . SFP 2 SFPs 1G SM (10Km distance). 5G Module to be included No. Required Bandwidth Tier 1 – up to 200 Mbps advantage . License & Support . License DNA Advantage 3 Years License - NIC Assigned License. Support LEVEL 1 8X5XNBD 3 Years. | عدد | 22 | 0 | |
| كرت للموزع الرئيسي اجهزة الشبكة من 8 منافذ | أجهزة | 1 | الكمية المتوقعة 6 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Cisco Catalyst 9500 8 x 10GE Network Module C9500-NM-8X. • 3 Years Warranty. . | عدد | 23 | 0 | |
| كرت لموجه اجهزة الشبكة من 1 منفذ | أجهزة | 1 | الكمية المتوقعة 15 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • 1-port 1Gbps & 2.5Gbps mGig RJ45 Ethernet WAN NIM with uPoE 8200/8300( C-NIM-1M ). • 3 Years Warranty. | عدد | 24 | 0 | |
| كرت لموجه اجهزة الشبكة من 8 منافذ | أجهزة | 1 | الكمية المتوقعة 120 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product. • 8-port POE/POE+ Layer 2 GE Switch Network Interface Module. • NIM-ES2-8-P=. • 3 Years Warranty. | عدد | 25 | 0 | |
| كرت لموجه اجهزة الشبكة من 16 منفذ | أجهزة | 1 | الكمية المتوقعة 120 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product. • Cisco Catalyst Edge SM 16-port 1G, 4-port 2.5 mGigabit Ether. • C-SM-16P4M2X=. • 3 Years Warranty. | عدد | 26 | 0 | |
| وحدة الارسال والاستقبال SFP GLC TE 1G UTP SM | أجهزة | 1 | الكمية المتوقعة 4 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • 1000BASE-T SFP transceiver module for Category 5 copper wire. • Speed: 1G UTP. • 3 Years Warranty. | عدد | 27 | 0 | |
| كرت لموزع اجهزة الشبكة من 4 منافذ عالي السرعة | أجهزة | 1 | الكمية المتوقعة 18 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • 4 x 100M/1G/2.5G/5G/10 Gigabit Ethernet RJ45 Ports (C9300-NM-4M). • 3 Years Warranty. | عدد | 28 | 0 | |
| كرت لموزع اجهزة الشبكة من 4 منافذ | أجهزة | 1 | الكمية المتوقعة 15 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • 9300 Series 4x 1G Network Module (C9300-NM-4G). • 3 Years Warranty. | عدد | 29 | 0 | |
| وحدة الارسال والاستقبال SFP 1G Multi Mode | أجهزة | 1 | الكمية المتوقعة 100 | . يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM. • Speed: 1G. • 3 Years Warranty. | عدد | 30 | 0 | |
| وحدة الارسال والاستقبال SFP 10G Single Mode | أجهزة | 1 | الكمية المتوقعة 150 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • 10GBASE-LR SFP Module. • Speed: 10G. • 3 Years Warranty. | عدد | 31 | 0 | |
| وحدة الارسال والاستقبال SFP 10G Multi Mode | أجهزة | 1 | الكمية المتوقعة 10 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • 10GBASE-SR SFP Module. • Speed: 10G. • 3 Years Warranty. | عدد | 32 | 0 | |
| وحدة الارسال والاستقبال Optical Transceiver SFPplus 10G MM | أجهزة | 1 | الكمية المتوقعة 7 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. • Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Form Factor:. SFP+ (Small Form-factor Pluggable). Compact design for high-density, hot-swappable use in networking equipment.. • Data Rate:. 10 Gbps (Gigabits per second). • Interface:. Multi-Mode Fiber (MMF). • Wavelength:. Typically 850 nm (for Multi-Mode Fiber transmission). • Transmission Distance:. Up to 300 meters on OM3 Multi-Mode Fiber (MMF) at 10 Gbps. Up to 400 meters on OM4 Multi-Mode Fiber at 10 Gbps. The distance can vary based on the specific fiber grade (OM1, OM2, OM3, OM4).. • Connector Type:. LC Duplex (two fiber ports for transmit and receive paths). • Operating Temperature:. 0°C to 70°C (Commercial Temperature Range). Some models may have an extended operating temperature range of -40°C to 85°C for industrial use.. • Power Consumption:. Typically 1-2W . • Compliance Standards:. SFF-8472, IEEE 802.3ae, RoHS Compliant, SFP+ MS. • 3 Years Warranty. | عدد | 33 | 0 | |
| وحدة الارسال والاستقبال Single Mode SFP 1G | أجهزة | 1 | الكمية المتوقعة 550 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM. • Speed: 1G. • 3 Years Warranty. | عدد | 34 | 0 | |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Multi Mode بطول 20 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Beige. 5. Color, connector B Beige. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B SC/UPC. 8. Jacket Color Aqua. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 20M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 35 | 2114 | 1 |
| وحدة الارسال والاستقبال Optical Transceiver SFPplus 1G MM | أجهزة | 1 | الكمية المتوقعة 9 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product. • Form Factor:. SFP+ (Small Form-factor Pluggable). Hot-swappable, compact design.. • Data Rate:. 1 Gbps (Gigabit per second). • Interface:. Multi-Mode Fiber (MMF). • Wavelength:. 850 nm (typically for Multi-Mode Fiber). • Transmission Distance:. Up to 550 meters on OM2 fiber at 1 Gbps. Up to 550 meters on OM3 fiber at 1 Gbps. • Connector Type:. LC Duplex (two fiber ports for sending and receiving data). • Operating Temperature:. 0°C to 70°C (Commercial Temperature Range). • Power Consumption:. Typically 1-2W (depending on the specific model). • Compliance Standards:. SFF-8472, IEEE 802.3z, RoHS Compliant. • 3 Years Warranty. | عدد | 36 | 0 | |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Multi Mode بطول 5 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Beige. 5. Color, connector B Beige. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B SC/UPC. 8. Jacket Color Aqua. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 5M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . . | عدد | 37 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Multi Mode بطول 10 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Beige. 5. Color, connector B Beige. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B SC/UPC. 8. Jacket Color Aqua. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 10M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 38 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Multi Mode بطول 50 متر | كيبل | 1 | الكمية المتوقعة 6 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Beige. 5. Color, connector B Beige. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B SC/UPC. 8. Jacket Color Aqua. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 50M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 39 | 2114 | 1 |
| وحدة الارسال والاستقبال Optical Transceiver SFPplus 1G SM | أجهزة | 1 | الكمية المتوقعة 7 | يجب ان تكون الرخص والدعم الفني 36 شهر وتنقل باٍسم مركز المعلومات الوطني. Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product. • Form Factor:. SFP+ (Small Form-factor Pluggable). Hot-swappable, compact design for high-density applications.. • Data Rate:. 1 Gbps (Gigabit per second). • Interface:. Single-Mode Fiber (SMF). • Wavelength:. Typically 1310 nm for Single-Mode Fiber transmission.. • Transmission Distance:. Up to 10 kilometers (10 km) at 1 Gbps on standard Single-Mode Fiber (SMF). For extended-range variants, the distance can reach up to 40 km or more, depending on the specific model and optical power.. • Connector Type:. LC Duplex (for both transmit and receive fibers). • Operating Temperature:. 0°C to 70°C (Commercial Temperature Range). • Power Consumption:. Typically 1-2W . • Compliance Standards:. SFF-8472, IEEE 802.3z, RoHS Compliant. • 3 Years Warranty. | عدد | 40 | 0 | |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Multi Mode بطول 3 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Beige. 5. Color, connector B Beige. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B SC/UPC. 8. Jacket Color Aqua. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 3M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 41 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Multi Mode بطول 50 متر | كيبل | 1 | الكمية المتوقعة 6 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Aqua. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 50M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 42 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Multi Mode بطول 20 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Aqua. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 20M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . . | عدد | 43 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Multi Mode بطول 10 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Aqua. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 10M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 44 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Multi Mode بطول 5 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Aqua. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 5M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . . | عدد | 45 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Multi Mode بطول 1 متر | كيبل | 1 | الكمية المتوقعة 15 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Beige. 5. Color, connector B Beige. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B SC/UPC. 8. Jacket Color Aqua. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 1M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 46 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Single Mode بطول 10 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Connector A, quantity 2. 7. Connector B, quantity 2. 8. Interface, Connector A LC/UPC. 9. Interface, Connector B SC/UPC. 10. Jacket Color Yellow. 11. Total Fibers, quantity 2. 12. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 13. Ordering Tree:. . 14. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 15. Fiber Mode Single Mode. 16. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 17. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 18. Environmental Space Plenum. 19. Length: 10M. 20. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 21. 3 Years Warranty . | عدد | 47 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Multi Mode بطول 1 متر | كيبل | 1 | الكمية المتوقعة 15 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Aqua. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 1M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 48 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Single Mode بطول 50 متر | كيبل | 1 | الكمية المتوقعة 6 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Connector A, quantity 2. 7. Connector B, quantity 2. 8. Interface, Connector A LC/UPC. 9. Interface, Connector B SC/UPC. 10. Jacket Color Yellow. 11. Total Fibers, quantity 2. 12. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 13. Ordering Tree:. . 14. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 15. Fiber Mode Single Mode. 16. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 17. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 18. Environmental Space Plenum. 19. Length: 50M. 20. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 21. 3 Years Warranty . | عدد | 49 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Single Mode بطول 20 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Connector A, quantity 2. 7. Connector B, quantity 2. 8. Interface, Connector A LC/UPC. 9. Interface, Connector B SC/UPC. 10. Jacket Color Yellow. 11. Total Fibers, quantity 2. 12. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 13. Ordering Tree:. . 14. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 15. Fiber Mode Single Mode. 16. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 17. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 18. Environmental Space Plenum. 19. Length: 20M. 20. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 21. 3 Years Warranty . | عدد | 50 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Multi Mode بطول 3 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Aqua. 3. Color, boot B Aqua. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Aqua. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Multimode. 15. Fiber Type OM4, LazrSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 3M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 51 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex APC LC to APC LC Single Mode بطول 20 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Green. 3. Color, boot B Green. 4. Color, connector A Green. 5. Color, connector B Green. 6. Interface, Connector A LC/APC. 7. Interface, Connector B LC/APC. 8. Jacket Color Yellow. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length minimum (ft) 2. Cable Assembly Length maximum (ft) 325. Cable Assembly Length, minimum (m) 1. Cable Assembly Length, maximum (m) 99. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 20M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 52 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex APC LC to APC LC Single Mode بطول 10 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Green. 3. Color, boot B Green. 4. Color, connector A Green. 5. Color, connector B Green. 6. Interface, Connector A LC/APC. 7. Interface, Connector B LC/APC. 8. Jacket Color Yellow. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length minimum (ft) 2. Cable Assembly Length maximum (ft) 325. Cable Assembly Length, minimum (m) 1. Cable Assembly Length, maximum (m) 99. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 10M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . . | عدد | 53 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex APC LC to APC LC Single Mode بطول 50 متر | كيبل | 1 | الكمية المتوقعة 6 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Green. 3. Color, boot B Green. 4. Color, connector A Green. 5. Color, connector B Green. 6. Interface, Connector A LC/APC. 7. Interface, Connector B LC/APC. 8. Jacket Color Yellow. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length minimum (ft) 2. Cable Assembly Length maximum (ft) 325. Cable Assembly Length, minimum (m) 1. Cable Assembly Length, maximum (m) 99. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 50M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . . | عدد | 54 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Single Mode بطول 5 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Connector A, quantity 2. 7. Connector B, quantity 2. 8. Interface, Connector A LC/UPC. 9. Interface, Connector B SC/UPC. 10. Jacket Color Yellow. 11. Total Fibers, quantity 2. 12. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 13. Ordering Tree:. . 14. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 15. Fiber Mode Single Mode. 16. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 17. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 18. Environmental Space Plenum. 19. Length: 5M. 20. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 21. 3 Years Warranty . | عدد | 55 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Single Mode بطول 3 متر | كيبل | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Connector A, quantity 2. 7. Connector B, quantity 2. 8. Interface, Connector A LC/UPC. 9. Interface, Connector B SC/UPC. 10. Jacket Color Yellow. 11. Total Fibers, quantity 2. 12. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 13. Ordering Tree:. . 14. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 15. Fiber Mode Single Mode. 16. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 17. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 18. Environmental Space Plenum. 19. Length: 3M. 20. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 21. 3 Years Warranty . | عدد | 56 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC SC Single Mode بطول 1 متر | كيبل | 1 | الكمية المتوقعة 15 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Connector A, quantity 2. 7. Connector B, quantity 2. 8. Interface, Connector A LC/UPC. 9. Interface, Connector B SC/UPC. 10. Jacket Color Yellow. 11. Total Fibers, quantity 2. 12. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 13. Ordering Tree:. . 14. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 15. Fiber Mode Single Mode. 16. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 17. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 18. Environmental Space Plenum. 19. Length: 1M. 20. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 21. 3 Years Warranty . | عدد | 57 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex APC LC to APC LC Single Mode بطول 3 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Green. 3. Color, boot B Green. 4. Color, connector A Green. 5. Color, connector B Green. 6. Interface, Connector A LC/APC. 7. Interface, Connector B LC/APC. 8. Jacket Color Yellow. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length minimum (ft) 2. Cable Assembly Length maximum (ft) 325. Cable Assembly Length, minimum (m) 1. Cable Assembly Length, maximum (m) 99. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 3M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . . | عدد | 58 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Single Mode بطول 20 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 20M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . . | عدد | 59 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex APC LC to APC LC Single Mode بطول 1 متر | كيبل | 1 | الكمية المتوقعة 15 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Green. 3. Color, boot B Green. 4. Color, connector A Green. 5. Color, connector B Green. 6. Interface, Connector A LC/APC. 7. Interface, Connector B LC/APC. 8. Jacket Color Yellow. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length minimum (ft) 2. Cable Assembly Length maximum (ft) 325. Cable Assembly Length, minimum (m) 1. Cable Assembly Length, maximum (m) 99. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 1M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 60 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Single Mode بطول 10 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 10M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 61 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex APC LC to APC LC Single Mode بطول 5 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Green. 3. Color, boot B Green. 4. Color, connector A Green. 5. Color, connector B Green. 6. Interface, Connector A LC/APC. 7. Interface, Connector B LC/APC. 8. Jacket Color Yellow. 9. Polarity Method B. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length minimum (ft) 2. Cable Assembly Length maximum (ft) 325. Cable Assembly Length, minimum (m) 1. Cable Assembly Length, maximum (m) 99. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 5M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 62 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Single Mode بطول 50 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 50M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 63 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC FC Single Mode بطول 50 متر | كيبل | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/PC. 7. Interface, Connector B FC/PC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 12. Fiber Mode Single Mode. 13. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 14. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 15. Environmental Space Plenum. 16. Length: 50M. 17. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 18. 3 Years Warranty . | عدد | 64 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Single Mode بطول 3 متر | كيبل | 1 | الكمية المتوقعة 210 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 3M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 65 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Single Mode بطول 1 متر | كيبل | 1 | الكمية المتوقعة 150 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 19. Must be a brand name product.. 20. Color, boot A Blue. 21. Color, boot B Blue. 22. Color, connector A Blue. 23. Color, connector B Blue. 24. Interface, Connector A LC/UPC. 25. Interface, Connector B LC/UPC. 26. Jacket Color Yellow. 27. Polarity Pairs, flipped. 28. Total Fibers, quantity 2. 29. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 30. Ordering Tree:. . 31. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 32. Fiber Mode Single Mode. 33. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 34. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 35. Environmental Space Plenum. 36. Length: 1M. 37. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 38. 3 Years Warranty . . | عدد | 66 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC FC Single Mode بطول 20 متر | كيبل | 1 | الكمية المتوقعة 15 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/PC. 7. Interface, Connector B FC/PC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 12. Fiber Mode Single Mode. 13. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 14. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 15. Environmental Space Plenum. 16. Length: 20M. 17. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 18. 3 Years Warranty . | عدد | 67 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC LC Single Mode بطول 5 متر | كيبل | 1 | الكمية المتوقعة 50 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Blue. 5. Color, connector B Blue. 6. Interface, Connector A LC/UPC. 7. Interface, Connector B LC/UPC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Dimensions: . Cable Assembly Length Range (m) 1 – 61. Cable Assembly Length Range (ft) 2 – 200. Diameter Over Jacket 1.6 mm | 0.063 in. 12. Ordering Tree:. . 13. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 14. Fiber Mode Single Mode. 15. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 16. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 17. Environmental Space Plenum. 18. Length: 5M. 19. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 20. 3 Years Warranty . | عدد | 68 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC FC Single Mode بطول 5 متر | كيبل | 1 | الكمية المتوقعة 30 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/PC. 7. Interface, Connector B FC/PC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 12. Fiber Mode Single Mode. 13. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 14. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 15. Environmental Space Plenum. 16. Length: 5M. 17. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 18. 3 Years Warranty . | عدد | 69 | 2114 | 1 |
| UTP cable cat6 5M | كيبل | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. CAT 6A Patch cable or LAN cable. 3. Length: 5 M. 4. Color: Gray. 5. Connectors: 8P8C. 6. Inner conductor made of steel-copper CCS with AWG 27 standard. 7. Shielding free U/UTP + PVC jacket with high durability, chemical and thermal resistance. 8. Transmission speed up to 10000 Mbit/s or 1 Gbit/s with frequency rate max. 250 MHz. 9. Compatible with IEEE 802.3, WLAN network, 10/100/1000 Base-T, PoE, PoE+, PoE++. 10. Anti-snag boot molded on each RJ45 plug/connector. 11. 3 Years Warranty. | عدد | 70 | 0 | |
| كوابل الفايبر باتش كورد من نوع Duplex LC FC Single Mode بطول 1 متر | كيبل | 1 | الكمية المتوقعة 120 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/PC. 7. Interface, Connector B FC/PC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 12. Fiber Mode Single Mode. 13. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 14. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 15. Environmental Space Plenum. 16. Length: 1M. 17. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 18. 3 Years Warranty . | عدد | 71 | 2114 | 1 |
| كوابل الفايبر باتش كورد من نوع Duplex LC FC Single Mode بطول 10 متر | كيبل | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/PC. 7. Interface, Connector B FC/PC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 12. Fiber Mode Single Mode. 13. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 14. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 15. Environmental Space Plenum. 16. Length: 10M. 17. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 18. 3 Years Warranty . | عدد | 72 | 2114 | 1 |
| UTP cable cat6 3M | كيبل | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. CAT 6A Patch cable or LAN cable. 3. Length: 3 M. 4. Color: Gray. 5. Connectors: 8P8C. 6. Inner conductor made of steel-copper CCS with AWG 27 standard. 7. Shielding free U/UTP + PVC jacket with high durability, chemical and thermal resistance. 8. Transmission speed up to 10000 Mbit/s or 1 Gbit/s with frequency rate max. 250 MHz. 9. Compatible with IEEE 802.3, WLAN network, 10/100/1000 Base-T, PoE, PoE+, PoE++. 10. Anti-snag boot molded on each RJ45 plug/connector. 11. 3 Years Warranty. | عدد | 73 | 0 | |
| كوابل الفايبر باتش كورد من نوع Duplex LC FC Single Mode بطول 3 متر | كيبل | 1 | الكمية المتوقعة 40 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Color, boot A Blue. 3. Color, boot B Blue. 4. Color, connector A Black. 5. Color, connector B Black. 6. Interface, Connector A LC/PC. 7. Interface, Connector B FC/PC. 8. Jacket Color Yellow. 9. Polarity Pairs, flipped. 10. Total Fibers, quantity 2. 11. Cable Retention Strength, maximum 11.24 lb @ 0 ° | 4.40 lb @ 90 °. 12. Fiber Mode Single Mode. 13. Fiber Type G.652.D | G.657.A1, TeraSPEED®. 14. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 15. Environmental Space Plenum. 16. Length: 3M. 17. CHINA-ROHS Below maximum concentration value. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance. ROHS Compliant. 18. 3 Years Warranty . | عدد | 74 | 2114 | 1 |
| UTP cable cat6 1M | كيبل | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. CAT 6A Patch cable or LAN cable. 3. Length: 1 M. 4. Color: Gray. 5. Connectors: 8P8C. 6. Inner conductor made of steel-copper CCS with AWG 27 standard. 7. Shielding free U/UTP + PVC jacket with high durability, chemical and thermal resistance. 8. Transmission speed up to 10000 Mbit/s or 1 Gbit/s with frequency rate max. 250 MHz. 9. Compatible with IEEE 802.3, WLAN network, 10/100/1000 Base-T, PoE, PoE+, PoE++. 10. Anti-snag boot molded on each RJ45 plug/connector. 11. 3 Years Warranty. | عدد | 75 | 0 | |
| console cable rj45 to USB mini Type B 2M | كيبل | 1 | الكمية المتوقعة 30 | Must meet General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 6. Interface 1: USB Type A . 7. Interface 2: USB Mini-B. 8. Length: 1.8 M. 2. 3 Years Warranty. | عدد | 76 | 0 | |
| console cable rj45 to Micro USB 2M | كيبل | 1 | الكمية المتوقعة 30 | Must meet General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Interface 1: USB Type A . 3. Interface 2: USB Micro-B. 4. Length: 1.8 M. 5. 3 Years Warranty. | عدد | 77 | 0 | |
| console cable rj45 to USB Type C 2M | كيبل | 1 | الكمية المتوقعة 30 | Must meet General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Interface 1: USB Type C. 3. Interface 2: RJ45. 4. Length: 1.8 M. 5. 3 Years Warranty. | عدد | 78 | 0 | |
| UTP cable cat6 5M | كيبل | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. CAT 6A Patch cable or LAN cable. 3. Length: 0.5 M. 4. Color: Gray. 5. Connectors: 8P8C. 6. Inner conductor made of steel-copper CCS with AWG 27 standard. 7. Shielding free U/UTP + PVC jacket with high durability, chemical and thermal resistance. 8. Transmission speed up to 10000 Mbit/s or 1 Gbit/s with frequency rate max. 250 MHz. 9. Compatible with IEEE 802.3, WLAN network, 10/100/1000 Base-T, PoE, PoE+, PoE++. 10. Anti-snag boot molded on each RJ45 plug/connector. 11. 3 Years Warranty. | عدد | 79 | 0 | |
| C14 to C15 Power cable 2M | كيبل | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • C14 to C15 Power Cable. • Length: 2M. • All equipment delivered, unless otherwise specified, shall be capable of operating normally when supplied with AC power within the range of 230-400 V with a frequency of 60 Hz ± 1 %, inclusive, and should be protected from over-voltage, overheating and out-of-tolerance current surges. Voltage switching should be automatic if possible. And all cables must be American "NEMA 5-15P”, SASO (SAUDI STANDARD) and NEC (NATIONAL ELECTRICAL CODE) compatible.. | عدد | 80 | 0 | |
| console cable usb to rj45 2M | كيبل | 1 | الكمية المتوقعة 30 | Must meet General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Interface 1: USB Type A. 3. Interface 2: RJ45. 4. Length: 1.8 M. 5. 3 Years Warranty. | عدد | 81 | 0 | |
| Cage Nut | برغي | 1 | الكمية المتوقعة 5000 | Must meet General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. M6 Cage Nut. 3. Includes Screw. 4. Includes Plastic Cup Washers . | عدد | 82 | 0 | |
| توصيلة كهرباء PDU | توصيلة | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Rack PDU 2G, Metered, Zero U, 22.0kW(32A) 17.3kW(24A), 230V, (30) C13 & (12) C19,(2 PDU for each rack) PDU support Snmp and API on Ethernet. • PDU Type: Smart. • PDU Rating: 17KVA at 3 phase/380V. | عدد | 83 | 0 | |
| كيبل UTP باتش كورد بطول 1 متر | كيبل | 1 | الكمية المتوقعة 300 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. ANSI/TIA Category 6. 3. Cable Type U/UTP (unshielded). 4. Conductor Type Stranded. 5. Interface, Connector A RJ45 plug. 6. Interface Feature, connector A Standard. 7. Interface, Connector B RJ45 plug. 8. Interface Feature, connector B Standard. 9. Pairs, quantity 4. 10. Transmission Standards IEEE 802.3bt Type 4. 11. Wiring T568B. 12. Dimensions: Cable Assembly Length Range (m) 1 – 30. Cable Assembly Length Range (ft) 1 – 100. Cable Assembly Length Range (cm) 15 – 999. Cable Assembly Length Range (in) 6 – 999. Diameter Over Jacket 5.97 mm | 0.235 in. Compatible Conductor Gauge, stranded 24 AWG. . 13. Wiring Diagram:. . 14. dc Resistance, maximum 0.3 ohm. 15. Safety Voltage Rating 300 V. 16. Ordering Tree:. . 17. Contact Plating Material Precious metals. 18. Material Type Copper alloy | Polycarbonate. 19. Plug Insertion Life, minimum 750 times. 20. Plug Retention Force, minimum 133 N | 29.9 lbf. 21. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 22. Environmental Space Non-plenum. 23. Flammability Rating UL 94 V-0. 24. Safety Standard Anatel | ETL | cETL. 25. ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system. 26. 3 Years Warranty. | عدد | 84 | 0 | |
| C13 to C14 Power cable 2M | كيبل | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • C13 to C14 Power Cable. • Length: 2M. • All equipment delivered, unless otherwise specified, shall be capable of operating normally when supplied with AC power within the range of 230-400 V with a frequency of 60 Hz ± 1 %, inclusive, and should be protected from over-voltage, overheating and out-of-tolerance current surges. Voltage switching should be automatic if possible. And all cables must be American "NEMA 5-15P”, SASO (SAUDI STANDARD) and NEC (NATIONAL ELECTRICAL CODE) compatible.. | عدد | 85 | 0 | |
| لوحة الربط وتنظيم الوصلات 24 منفذ | مجمع وصلات | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. RJ45 patch panel. 3. ANSI/TIA Category 6. 4. Cable Type Unshielded. 5. Color Black. 6. Conductor Type Solid | Stranded. 7. Modules, quantity 4. 8. Panel Style Straight. 9. Rack Type EIA 19 in. 10. Rack Units 2. 11. Termination Type IDC. 12. Total Ports, quantity 24. 13. Transmission Standards ANSI/TIA-568.2-D | ISO/IEC 11801 Class E. 14. Wiring T568A | T568B. 15. Dimensions: Height 44.45 mm | 1.75 in Width 482.6 mm | 19 in Depth, with cable management 119.38 mm | 4.7 in. 16. Compatible Diameter Over Dielectric, maximum 1.168 mm | 0.046 in. 17. Compatible Diameter Over Dielectric, minimum 0.762 mm | 0.03 in. 18. Compatible Conductor Gauge, solid 22 AWG. 19. Compatible Conductor Gauge, stranded 22 AWG. 20. Current Rating at Temperature 1.5 A @ 20 °C | 1.5 A @ 68 °F. 21. Dielectric Withstand Voltage, RMS, conductive surface 1,500 Vac @ 60 Hz. 22. Dielectric Withstand Voltage, RMS, contact-to-contact 1,000 Vac @ 60 Hz. 23. Insulation Resistance, minimum 500 MOhm. Remote Powering Fully complies with the recommendations set forth by IEEE802.3bt (Type 4) for the safe delivery of power over LAN cable. when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A. 24. Contact Plating Material Precious metals. 25. Material Type High-impact, flame retardant, thermoplastic | Powdercoated steel. 26. Termination Contact Plating Nickel. 27. Plug Insertion Life, minimum 750 times. 28. Plug Insertion Life, test plug IEC 60603-7 compliant plug. 29. Plug Retention Force, minimum 133 N | 29.9 lbf. 30. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 31. Storage Temperature -40 °C to +70 °C (-40 °F to +158 °F). 32. Relative Humidity Up to 95%, non-condensing. 33. Flammability Rating UL 94 V-0. 34. Safety Standard RCM | UL | cUL. 35. 3 Years Warranty. | عدد | 86 | 0 | |
| كبائن اتصالات شبكة مقاس 42 U | كبينة اتصالات | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product.. 1. Full Vented Top Frame with Front / Rear / Side Cable Entrance. 2. 4 x 4-inch Top Fan Tray with Guard & Filter (Low Noise). 3. 2 x Lift Off Type Side Door with Quick Release Catch & Cam Lock. 4. 1 x Perforated (75%) Arc-Fold Front Door with Swing Handle Lock (Hexagon Honey-Comb). 5. 1 x Double-section Full Perforation Rear Door with Swing Handle Lock (Hexagon Honey-Comb). 6. 2 x Front Cable management c/w Cable Ring. 7. 1 x Vertical Cable Tray. 8. 1 x Set Panel Mount Support. 9. 4 x Panel Mount with Unit Indication & Silk Screen Numbering. 10. 1 x Base Frame with Provision of Cable Entrance. 11. 1 x Set of Heavy Duty Castor Wheels. 12. 1 x Set of Leveling Stand. 13. 2 x Vented Equipment Fixed Tray. 14. 1 x Power Distribution Unit (12 Way Vertical ZeroU PDU) with 13A UK-Type Sockets. 15. 1 Packet of M6 Cage Nuts Assembly (50pcs). 16. Finish with Epoxy Powder Coating (RAL 9004 Black). 17. Dimensions 800 × 1000 × 2055 mm. 18. 3 years Warranty.. | عدد | 87 | 0 | |
| كبائن اتصالات شبكة مقاس 15 U | كبينة اتصالات | 1 | الكمية المتوقعة 300 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Height: 15U (26.25 inches or 66.68 cm). 3. Width: 600mm (23.62 inches). 4. Depth: 600mm (23.62 inches). 5. Weight: Typically around 40-60 kg (depends on material and accessories). 6. Material: Steel (16-gauge or similar). 7. Mounting Compatibility: Supports 19-inch rack-mounted equipment (EIA-310 standard). 8. Front Door: Lockable, typically ventilated or perforated for airflow.. 9. Rear Door: Usually lockable, ventilated, or removable for easy access.. 10. Side Panels: Lockable for extra security.. 11. Cable Management: Includes internal cable management channels or brackets.. 12. Cooling: Can be designed with ventilation holes for passive cooling, with optional fan trays or airflow solutions.. 13. Load Capacity: Generally supports up to 1000-1500 lbs (450-680 kg) depending on construction.. 14. Grounding: Equipped with provisions for grounding.. 15. Finish with Epoxy Powder Coating (RAL 9004 Black). 16. 3 years Warranty.. | عدد | 88 | 0 | |
| كيبل2M HDMI | كيبل | 1 | الكمية المتوقعة 150 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. HDMI 2.1 Generation. 3. Ultra High Speed HDMI. 4. 48Gbps. 5. 8K@60 4K@120. 6. thick braided cable. 7. Gold Contact plating. 8. cable length 2 M. 9. 3 years Warranty.. | عدد | 89 | 0 | |
| لوحة الربط وتنظيم الوصلات 48 منفذ | مجمع وصلات | 1 | الكمية المتوقعة 50 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. RJ45 patch panel. 3. ANSI/TIA Category 6. 4. Cable Type Unshielded. 5. Color Black. 6. Conductor Type Solid | Stranded. 7. Modules, quantity 8. 8. Panel Style Straight. 9. Rack Type EIA 19 in. 10. Rack Units 2. 11. Termination Type IDC. 12. Total Ports, quantity 48. 13. Transmission Standards ANSI/TIA-568.2-D | ISO/IEC 11801 Class E. 14. Wiring T568A | T568B. 15. Dimensions: Height 88.9 mm | 3.5 in Width 482.6 mm | 19 in Depth, with cable management 119.38 mm | 4.7 in. 16. Compatible Diameter Over Dielectric, maximum 1.168 mm | 0.046 in. 17. Compatible Diameter Over Dielectric, minimum 0.762 mm | 0.03 in. 18. Compatible Conductor Gauge, solid 22 AWG. 19. Compatible Conductor Gauge, stranded 22 AWG. 20. Current Rating at Temperature 1.5 A @ 20 °C | 1.5 A @ 68 °F. 21. Dielectric Withstand Voltage, RMS, conductive surface 1,500 Vac @ 60 Hz. 22. Dielectric Withstand Voltage, RMS, contact-to-contact 1,000 Vac @ 60 Hz. 23. Insulation Resistance, minimum 500 MOhm. Remote Powering Fully complies with the recommendations set forth by IEEE802.3bt (Type 4) for the safe delivery of power over LAN cable. when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A. 24. Contact Plating Material Precious metals. 25. Material Type High-impact, flame retardant, thermoplastic | Powdercoated steel. 26. Termination Contact Plating Nickel. 27. Plug Insertion Life, minimum 750 times. 28. Plug Insertion Life, test plug IEC 60603-7 compliant plug. 29. Plug Retention Force, minimum 133 N | 29.9 lbf. 30. Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F). 31. Storage Temperature -40 °C to +70 °C (-40 °F to +158 °F). 32. Relative Humidity Up to 95%, non-condensing. 33. Flammability Rating UL 94 V-0. 34. Safety Standard RCM | UL | cUL. 35. 3 Years Warranty. | عدد | 90 | 0 | |
| كبائن اتصالات شبكة مقاس 27 U | كبينة اتصالات | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product.. . 1. Cabinet type: Free-standing.. 2. Cabinet color: Black ,. 3. Height: 27U.. 4. Cabinet dimensions (W x D x H): 600x800x1388 mm.. 5. Packaging dimensions (W x D x H): Top & Bottom :63x123.5x9.5 cm. Doors: 63.5x61.5x13.5 cm. Frame: 61x130x24.5 cm. . 6. LCD display – no.. 7. Floor panel: 4 castors with brake + adjustable legs.. 8. Internal width spacing between rack rails: 450 mm.. 9. Width of the spacing between holes of rack rails: 475 mm.. 10. External width spacing between rack rails: 500 mm.. 11. Loading capacity: up to 800 KG.. 12. Degree of protection: IP20.. 13. Top with fan tray: included 2 fans 230V in top cover.. 14. Doors type: Front : Mesh. Rear : Mesh.. 15. Standard compliance: ANSI/EIA RS-310D, IEC297-2, DIN41494; PART1 & PART7, ETSI.. 16. Material: High grade cold rolled steel, powder coated(Black).. 17. Glass thickness: 5.0 mm.. 18. Sheet thickness: vertical mounting rails - 2,00 mm; mounting profile - 2,00 mm; others - 1,50 mm - 1,20 mm. 19. 3 years Warranty.. | عدد | 91 | 0 | |
| كيبل DP 2M | كيبل | 1 | الكمية المتوقعة 150 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. DP 2.0 Generation or Higher. 3. Gold-plated connectors. 4. cable length 2 M. 5. 3 years Warranty.. | عدد | 92 | 0 | |
| كيبل كاميرا USB A to Mini USB B 3M | كيبل | 1 | الكمية المتوقعة 250 | Must meet General HW requirements plus the following Minimum of requirements:. 1. Mini USB to USB Fast Data Charger Cable for Digital Camera HDD mini usb data 3 M. 2. Black color cable. 3. USB 2.0 Male to Mini USB 2.0 Right Angle Male Cable. 4. Transfer speed: 480M / bps (Max.). 5. CONNECTION: The cable connects a camera to a Mini-B 5-Pin port. 6. CONSISTENT: Gold-plated connectors for consistent and reliable conductivity. 7. NOISE: The cable has a reinforced ferrite core to filter out signal noise and reduce transmission errors. 8. LINED: Full-lined shielding protects against external signal interference.. 9. 3 years Full Warranty. | عدد | 93 | 0 | |
| كيبل Mini HDMI to HDMI 2M | كيبل | 1 | الكمية المتوقعة 70 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. HDMI 2.1 Generation. 3. Ultra High Speed HDMI. 4. 48Gbps. 5. 8K@60 4K@120. 6. thick braided cable. 7. Gold Contact plating. 8. cable length 2 M. 9. 3 years Warranty.. | عدد | 94 | 0 | |
| وصلة محول شاشة من DP إلى VGA | كيبل | 1 | الكمية المتوقعة 150 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Supports PC video resolutions up to 1920 x 1200, and HD resolutions up to 1080p. 3. Gold-plated connectors. 4. 3 years Warranty.. | عدد | 95 | 0 | |
| كيبل USB A to Micro USB B 1 8M | كيبل | 1 | الكمية المتوقعة 70 | Must meet General HW requirements plus the following Minimum of requirements:. 1. Micro USB to USB Fast Data Charger Cable for Digital Camera HDD micro usb data 1.8 M. 2. Black color cable. 3. USB 2.0 Male to Micro USB 2.0 Right Angle Male Cable. 4. Transfer speed: up to 480M / bps (Max.). 5. CONNECTION: The cable connects a camera to a Mini-B 5-Pin port. 6. CONSISTENT: Gold-plated connectors for consistent and reliable conductivity. 7. NOISE: The cable has a reinforced ferrite core to filter out signal noise and reduce transmission errors. 8. LINED: Full-lined shielding protects against external signal interference.. 9. 3 years Full Warranty. | عدد | 96 | 0 | |
| كيبل كاميرا USB A to Mini USB B 1 8M | كيبل | 1 | الكمية المتوقعة 250 | Must meet General HW requirements plus the following Minimum of requirements:. 1. Mini USB to USB Fast Data Charger Cable for Digital Camera HDD mini usb data 1.8 M. 2. Black color cable. 3. USB 2.0 Male to Mini USB 2.0 Right Angle Male Cable. 4. Transfer speed: 480M / bps (Max.). 5. CONNECTION: The cable connects a camera to a Mini-B 5-Pin port. 6. CONSISTENT: Gold-plated connectors for consistent and reliable conductivity. 7. NOISE: The cable has a reinforced ferrite core to filter out signal noise and reduce transmission errors. 8. LINED: Full-lined shielding protects against external signal interference.. 9. 3 years Full Warranty. | عدد | 97 | 0 | |
| ماسحات ضوئية لكروت البصمة Flatbed | أجهزة | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. - The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics/reader device otherwise.. 1. Must be a brand name product. 2. Scanner type Flatbed. 3. Scanning area 8.5 x 14 inches. 4. Resolution - Hardware = 4800 x 4800 dpi; Optical = 4800 dpi; Enhanced = up to 999,999 enhanced dpi (Maximum dpi at which you can scan is limited by available computer memory, disk space and other system factors.). 5. Color depth - 48-bit, Gray scale 256. 6. Scan input modes - Front-panel scan, copy, transparent materials adapter (TMA). 7. Preview speed 4 seconds. 8. Zooming - 10 to 2000% in 1% increments. 9. Interface - 1 USB 2.0. 10. High Quality USB cable, at least 1.8M length. . 11. operating environment Temperature = 50 to 95 F (10 to 35 C); Humidity range = 15 to 85% RH. 12. File formats supported - BMP, TIFF, GIF, PDF, HTML, JPEG, FlashPix (FPX), TIFF compressed, PCX, RTF, TXT, and PNG. 13. Power supply Universal AC adapter = 100-240 VAC (50/60 Hz) input; 32Vdc, 2.0 amp output.. 14. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 15. 3 years Full Warranty. | عدد | 98 | 0 | |
| ماسحات ضوئية للصور الشخصية | أجهزة | 1 | الكمية المتوقعة 500 | Must meet NIC General HW requirements plus the following Minimum of requirements:. - The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics/reader device otherwise.. . 1. Must be a Brand Name.. 2. Scanner Type: Flatbed, Simplex. 3. Scanning Speed: Color: at least 1.7 seconds (200 dpi) Grayscale/Monochrome: 1.0 seconds (200/300 dpi). 4. USB Bus-Powered: Image Sensor Type: Color cIS (CMOS CIS). 5. Light Source: 3 Color LED. 6. Optical Resolution: 600 dpi. 7. Output Resolution: Color/Grayscale/Monochrome 50 to 600 dpi. 8. Output Format: Color: 24-bit, Grayscale: 8-bit, Monochrome: 1-bit. 9. Background Color: Black. 10. Document Size: MAX 105 x 148 mm (4.1 x 5.8 in.). 11. Interface: USB 2.0. 12. High Quality USB cable, at least 1.8M length. 13. Power requirement: AC 100 to 240 V ±10 %. 14. Operating Environment: Temperature: 5 to 35 °C (41 to 95 °F) Humidity: 20 to 80%. 15. Dimensions: 145 x 234 x 40 mm (5.7 x 9.2 x 1.6 in.). 16. Software / Drivers: TWAIN/TWAIN x64. 17. 3 years Warranty.. | عدد | 99 | 0 | |
| ماسحات ضوئية متقدمة للأرشفة | أجهزة | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product. 2. Mono Duplex ADF (automatic document feeder) w/Minimum of 300 sheet Capacity.. 3. Flatbed Duplex. 4. Document Size Flatbed MAX 304.8 x 457.2 mm (12 x 18 in.). 5. Document Size ADF MAX 304.8 x 431.8 mm (12 x 17 in.). 6. Scan Speed: Simplex: 80 ppm (200/300 dpi) Duplex: 160 ipm (200/300 dpi) Flatbed: 0.9 s. 7. 600DPI Optical resolution. 8. Light Source: White LED Array x 6 (front x 2, back x 2, Flatbed x 2). 9. Output Format: Color: 24-bit, Grayscale: 8-bit, Monochrome: 1-bit. 10. Interface USB 3.1. 11. High Quality USB cable, at least 1.8M length. 12. All required consumable during warrantee period. 13. TWAIN compliant.. 14. 220 V regulated Power Supply AC 100 to 240 V ±10 %. 15. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 16. 3 years Full Warranty. | عدد | 100 | 0 | |
| وصلة USB to RJ45 للأجهزة المكتبية | أجهزة | 1 | الكمية المتوقعة 50 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. Hardware Specifications:. • Input:. o USB 3.0 interface for high-speed data transfer.. • Output:. o RJ45 connector supporting 10/100/1000 Mbps Ethernet standards.. • Chipset:. o AX88179 for efficient data processing.. • Cable Length:. o Approximately 10 cm.. • Dimensions:. o 60 mm x 23.8 mm x 15.8 mm.. Performance:. • Supports data transfer rates up to 1000 Mbps (1 Gbps), offering faster and more stable wired network connections compared to Wi-Fi. . Compatibility:. • Operating Systems:. o Plug and play support for Windows 10/8.1/8, Chrome OS, and macOS.. • Material: aluminum. • Grey colour. • 3 Years Warranty. | عدد | 101 | 0 | |
| وصلة بلوتوث للأجهزة المكتبية | أجهزة | 1 | الكمية المتوقعة 350 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. USB A Bluetooth dongle v5.0 . 3. Bluetooth dongle v5.0 or higher. 4. backward compatible with Bluetooth 2.0/2.1/3.0/4.0 devices. . 5. allows to connect up to 5 devices simultaneously without affecting each other . 6. Compatible with Windows 11, 10, 8.1, 7 32/64 bit includes any drivers. 7. fast transmission speed of 3 Mbps: . 8. The transmission distance is up to 20 meters in an open space. 9. Bluetooth profile: A2DP/HSP/AVRCP/HID/PAN/GAVDP/DID/IOPT. 10. Frequency range: 2400MHz-2483.5MHz. 11. size of 53mm * 24mm * 13mm or less. 12. indicator light can clearly show the current status. 13. 3 Years Warranty. | عدد | 102 | 0 | |
| موزع USB | أجهزة | 1 | الكمية المتوقعة 80 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. . Highest performance - Each connector is controlled by a separate chip that manages its functions . This solution guarantees the highest performance of the accessory, regardless of the number of devices connected to it.. Signal quality unchanged - You can connect a wireless mouse or keyboard to the splitter without any problems. The signal will be as stable as when you connect the equipment directly to your computer . You can forget about delays.. Just plug in - HUB does not require additional programs or hundreds of drivers. All you have to do is plug it into a free USB port and you're done. You can start using it right away.. Specification. • Brand: Ugreen. • Plug: USB Type C with additional USB A converter. • Connectors: 4x USB 3.2 Gen 1, USB-C for additional power supply, e.g. 3.5'' HDD. • USB standard: USB 3.2 Gen 1. • Data transfer rate: up to 5 Gbps. • 3 Years Warranty. | عدد | 103 | 0 | |
| بطارية لاب توب Latitude 5310 | بطارية | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Latitude 5310 battery replacement. • 3 Years Warranty. | عدد | 104 | 0 | |
| بطارية لاب توب Latitude E7400 | بطارية | 1 | الكمية المتوقعة 40 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Latitude E7400 battery replacement. • 3 Years Warranty. | عدد | 105 | 0 | |
| مودم للموجهات C8200 C8300 | مودم | 1 | الكمية المتوقعة 220 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. P-5GS6-R16SA-GL. The bidder should provide a 5G Sub-6 GHz Pluggable Interface Module that is designed to be used with existing Cisco routers with advanced 5G connectivity. Below are its key technical specifications:. . Modem and Connectivity:. • Modem: EM9293. • 5G Bands Supported: n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79. • LTE Bands Supported: 1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 25, 26, 28, 29, 30, 32, 34, 38, 39, 40, 41, 42, 43, 46 (LAA), 48 (CBRS), B66, B71. • Maximum Data Rates:. o 5G Non-Standalone (NSA): Up to 3.3 Gbps (download) / 400 Mbps (upload). o 5G Standalone Mode(SA): Up to 3.6 Gbps (download) / 450 Mbps (upload). Physical Interfaces:. • Antenna Ports:. o Four SMA connectors for 5G/LTE antennas. o One SMA connector for GPS antenna. o The bidder should include the required antennas . • SIM Card Slots: Dual SIM slots supporting standard SIM cards. . LED Indicators:. • Enable LED: Indicates module status. • SIM 0 and SIM 1 LEDs: Show status of each SIM card. • GPS LED: Displays GPS connectivity status. • Service LED: Indicates service status. • 3 Years Warranty | عدد | 106 | 0 | |
| مودم للحقيبة المتنقلة 4G 5G | مودم | 1 | الكمية المتوقعة 50 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • USB LTE/5G Mobile Broadband (UMTS 2100, LTE 1800(FDD), 2300/2600 (TDD) with ability to choose Network mode (4G, 5G Global) connect as Network Adaptor. . • 3 Years Warranty. | عدد | 107 | 0 | |
| بطارية لاب توب Latitude 7480 | بطارية | 1 | الكمية المتوقعة 30 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Latitude 7480 battery replacement. • 3 Years Warranty. | عدد | 108 | 0 | |
| جهاز لوحي للتحقق من البصمات بنظام تشغيل ويندوز | أجهزة | 1 | الكمية المتوقعة 5 | Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product.. . - Screen: - Sunlight visible (440cd/m²) - 10.1" 10:16 - 1200*1920 IPS - 10-point touch, G+G, 6H+ Anti-scratch. - Processor: Intel(R) Pentium(R) Silver, N6000 - Low energy (TDP 6W). - Memory: 8 GB RAM. - Storage: 128GB . - Operating System: Windows 10 64bit, upgradable to Windows . - Passport Reader: MRZ reader with a dual antenna NFC reader so that eID or ePassport can read fully without moving the document. Document and Tablet can be held in one hand, allowing the o-cer to flexibly react to situations.. - Fingerprint: FAP30 (ASK NIC for preferred model). - Battery: hot swappable battery system. 5000mAh, 7.4V - Hot swappable - UK Plug Charger.. - Camera: 2 MP front camera - 13 MP rear camera, auto-focus, flash with diffusor.. - Connectivity: Wi-Fi 802.11 b/g/n/a/ac dual frequency - Bluetooth 4.2 (BLE) - 2G/3G/4G (LTE) – Ethernet.. - Additional Ports: USB 3.0 - Headphone jack - TF card . - Durability: IP65 - ML-STD-810G 1.2m. - A carrying shoulder strap makes it easy to use while standing.. - 60° desk stand with easy access to the user's passport reader as well as easy charger connection while working.. - Working temperature -10 to 50 - Storage temperature -10 to 60 - Humidity 95% non-condensing.. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 3 years Full Warranty.. | عدد | 109 | 0 | |
| جهاز لوحي لتسجيل البصمات بنظام تشغيل اندرويد | أجهزة | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product.. Hardware Specifications:. • Processor:. o Model: ARM Cortex A73 Octa-Core. o Clock Speed: 2.0 GHz. • Memory:. o RAM: 8 GB. o Internal Storage: 128 GB. o External Storage: Supports microSD cards up to 256 GB. • Display:. o Size: 8-inch IPS/AFFS. o Resolution: 1920 x 1200 pixels (Full HD). o Brightness: 1000 nits (sunlight-readable). o Touch Panel: Capacitive/frosted tempered film supporting glove touch, spray, and active capacitive pen. • Cameras:. o Main Camera: 13.0 MP with autofocus and Dual LED flash. o Sub Camera: 5.0 MP. • Battery:. o Capacity: 10,000 mAh. o Features: Supports long operational hours suitable for fieldwork. Connectivity:. • Network:. o SIM Slots: Dual Nano SIM. o Cellular: 4G LTE. o Wi-Fi: 802.11 a/b/g/n/ac. o Bluetooth: Version 5.0. • Ports: 2x nano SIMs, MicroSD card slot,supports max.=128GB,USB Type A, and USB type C (supports charging),. o 3.5 earphone jack,Ethernet RJ45,HDMIAudio: 3.5mm headphone jack. Biometric Features:. Fingerprint Scanner: FBI Appendix F certified FAP50 compliant, 500PPI/256 levels gray scale;Image size: 300x400pixels.. Iris Scanner: Integrated contactless dual-Iris scanner, Capture distance. around 15cm, ISO Standard 19794-6 (2005 & 2011), (640x 480 Pixels, 8 bit Grayscale). . Barcode and MRZ Scanner: High speed 1D/2D barcode scan engine. Smart Card Reader: Contact chip card reader, ISO7816 Contactless,13.56MHZ, ISO14443 Type A/B, Mifare,Supports ePassport chip decoding,etc. . Rugged Features:. • Certification: MIL-STD-810G. • Ingress Protection: IP65 (dustproof and water-resistant). • Operating Temperature: -20°C to 55°C. • Storage Temperature: -40°C to 80°C. • Humidity: 5% to 95%. • Drop Resistance: Survives drops from up to 1.22 meters. Software:. • Operating System: Android 12. • SDK Support: Available for custom application development. Power Supply: USB TYPE C,supports Fast Charging 5V 2-3A/9V-1.67A(15w). Dimensions and Weight:. • Dimensions: 253.5 mm (L) x 224 mm (W) x 37 mm (H). • Weight: Approximately 1.4 kg. Certification & Protection: CE,RoHS,REACH,MIL-STD-810G,IP65 and 1.2 meter drop resistant.. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 3 years Full Warranty.. | عدد | 110 | 0 | |
| جهاز لوحي لتسجيل البصمات بنظام تشغيل ويندوز | أجهزة | 1 | الكمية المتوقعة 10 | Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product.. . - Screen: - Sunlight visible (440cd/m²) - 10.1" 10:16 - 1200*1920 IPS - 10-point touch, G+G, 6H+ Anti-scratch. - Processor: Intel(R) Pentium(R) Silver, N6000 - Low energy (TDP 6W). - Memory: 8 GB RAM. - Storage: 128GB . - Operating System: Windows 10 64bit, upgradable to Windows . - Passport Reader: MRZ reader with a dual antenna NFC reader so that eID or ePassport can read fully without moving the document. Document and Tablet can be held in one hand, allowing the o-cer to flexibly react to situations.. - Fingerprint: FAP60, Jenetric. - Battery: hot swappable battery system. 5000mAh, 7.4V - Hot swappable - UK Plug Charger.. - Camera: 2 MP front camera - 13 MP rear camera, auto-focus, flash with diffusor.. - Connectivity: Wi-Fi 802.11 b/g/n/a/ac dual frequency - Bluetooth 4.2 (BLE) - 2G/3G/4G (LTE) – Ethernet.. - Additional Ports: USB 3.0 - Headphone jack - TF card . - Durability: IP65 - ML-STD-810G 1.2m. - A carrying shoulder strap makes it easy to use while standing.. - 60° desk stand with easy access to the user's passport reader as well as easy charger connection while working.. - Working temperature -10 to 50 - Storage temperature -10 to 60 - Humidity 95% non-condensing.. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 3 years Full Warranty.. | عدد | 111 | 0 | |
| بطارية لاب توب Latitude 5400 | بطارية | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Latitude 5400 battery replacement. • 3 Years Warranty. | عدد | 112 | 0 | |
| جهاز لوحي للتحقق من البصمات بنظام تشغيل اندرويد | أجهزة | 1 | الكمية المتوقعة 5 | Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product.. Hardware Specifications:. • Processor:. o Model: ARM Cortex A73 Octa-Core. o Clock Speed: 2.0 GHz. • Memory:. o RAM: 8 GB. o Internal Storage: 128 GB. o External Storage: Supports microSD cards up to 256 GB. • Display:. o Size: 8-inch IPS/AFFS. o Resolution: 1920 x 1200 pixels (Full HD). o Brightness: 1000 nits (sunlight-readable). o Touch Panel: Capacitive/frosted tempered film supporting glove touch, spray, and active capacitive pen. • Cameras:. o Main Camera: 13.0 MP with autofocus and Dual LED flash. o Sub Camera: 5.0 MP. • Battery:. o Capacity: 10,000 mAh. o Features: Supports long operational hours suitable for fieldwork. Connectivity:. • Network:. o SIM Slots: Dual Nano SIM. o Cellular: 4G LTE. o Wi-Fi: 802.11 a/b/g/n/ac. o Bluetooth: Version 5.0. • Ports: 2x nano SIMs, MicroSD card slot,supports max.=128GB,USB Type A, and USB type C (supports charging),. o 3.5 earphone jack,Ethernet RJ45,HDMIAudio: 3.5mm headphone jack. Biometric Features:. Fingerprint Scanner: FBI Appendix F certified FAP30 compliant, 500PPI/256 levels gray scale;Image size: 300x400pixels.. Iris Scanner: Integrated contactless dual-Iris scanner, Capture distance. around 15cm, ISO Standard 19794-6 (2005 & 2011), (640x 480 Pixels, 8 bit Grayscale). . Barcode and MRZ Scanner: High speed 1D/2D barcode scan engine. Smart Card Reader: Contact chip card reader, ISO7816 Contactless,13.56MHZ, ISO14443 Type A/B, Mifare,Supports ePassport chip decoding,etc. . Rugged Features:. • Certification: MIL-STD-810G. • Ingress Protection: IP65 (dustproof and water-resistant). • Operating Temperature: -20°C to 55°C. • Storage Temperature: -40°C to 80°C. • Humidity: 5% to 95%. • Drop Resistance: Survives drops from up to 1.22 meters. Software:. • Operating System: Android 12. • SDK Support: Available for custom application development. Power Supply: USB TYPE C,supports Fast Charging 5V 2-3A/9V-1.67A(15w). Dimensions and Weight:. • Dimensions: 253.5 mm (L) x 224 mm (W) x 37 mm (H). • Weight: Approximately 1.4 kg. Certification & Protection: CE,RoHS,REACH,MIL-STD-810G,IP65 and 1.2 meter drop resistant.. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 3 years Full Warranty.. | عدد | 113 | 0 | |
| وحدة التخزين الخارجية من نوع SSD 1TBمع محفظة وكيبل | أجهزة | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Form factor: 2.5”. 3. Capacities: 1TB. 4. Sequential: Read/Write up to 550 MB/s /400MB/s. 5. Dimensions: not exceeded H x W x L: 10 x50x 100 mm. . 6. Operating temperature: 0C° to 45C°. 7. Interface: Gen2, USB 3.1 with two Cables USB 3.1 & USB type c.. 8. Durability: IP55-rated for water and dust resistance.. 9. Shock Resistant: up to 1500G . 10. Vibration Resistant 5 gRMS, 10- 2000 Hz. 11. Enclosure and cable should be included. 12. Warranty: 3 years. | عدد | 114 | 0 | |
| وحدة التخزين الداخلية من نوع SSD 1024GB | أجهزة | 1 | الكمية المتوقعة 50 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Form factor: 2.5”. 3. Interface: SATA Rev. 3.0 (6Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3Gb/s). 4. Capacities: 1024 GB. 5. Controller: SM2259 Controller. 6. NAND: 3D TLC. 7. Encryption: Encryption Support (AES 256-bit). 8. Sequential Read/Write: up to 550/500MB/s. 9. Maximum 4K Read/Write: up to 90,000/80,000 IOPS. 10. Power Consumption: 0.195W Idle / 0.5W Avg / 1.17W (MAX) Read / 2.32 W (MAX) Write. 11. Dimensions: 100.1mm x 69.85mm x 7mm (2.5”). 12. Operating temperature: 0°C~70°C. 13. Storage temperature: -40°C~85°C. 14. Weight: 41g (2.5”). 15. Vibration operating: 2.17G Peak (7–800Hz). 16. Vibration non-operating: 20G Peak (10–2000Hz). 17. Life expectancy: 1 million hours MTBF. 18. Mounting Brackets for SSD Easily install 2.5” SSD into a 3.5” bay. 19. 3 years Warranty.. | عدد | 115 | 0 | |
| وحدة التخزين الداخلية من نوع SSD 512GB | أجهزة | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Form factor: 2.5”. 3. Interface: SATA Rev. 3.0 (6Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3Gb/s). 4. Capacities: 512 GB. 5. Controller: SM2259 Controller. 6. NAND: 3D TLC. 7. Encryption: Encryption Support (AES 256-bit). 8. Sequential Read/Write: up to 550/500MB/s. 9. Maximum 4K Read/Write: up to 90,000/80,000 IOPS. 10. Power Consumption: 0.195W Idle / 0.5W Avg / 1.17W (MAX) Read / 2.32 W (MAX) Write. 11. Dimensions: 100.1mm x 69.85mm x 7mm (2.5”). 12. Operating temperature: 0°C~70°C. 13. Storage temperature: -40°C~85°C. 14. Weight: 41g (2.5”). 15. Vibration operating: 2.17G Peak (7–800Hz). 16. Vibration non-operating: 20G Peak (10–2000Hz). 17. Life expectancy: 1 million hours MTBF. 18. Warranty/support: Limited 5-year warranty with free technical support. 19. Mounting Brackets for SSD Easily install 2.5” SSD into a 3.5” bay. 20. Life expectancy: 2 million hours MTBF. 21. Mounting Brackets for SSD Easily install 2.5” SSD into a 3.5” bay. 22. 3 years Warranty.. | عدد | 116 | 0 | |
| وحدة التخزين الداخلية من نوع SSD 256GB | أجهزة | 1 | الكمية المتوقعة 400 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Form factor: 2.5”. 3. Interface: SATA Rev. 3.0 (6Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3Gb/s). 4. Capacities: 256 GB. 5. Controller: SM2259 Controller. 6. NAND: 3D TLC. 7. Encryption: Encryption Support (AES 256-bit). 8. Sequential Read/Write: up to 550/500MB/s. 9. Maximum 4K Read/Write: up to 90,000/80,000 IOPS. 10. Power Consumption: 0.195W Idle / 0.5W Avg / 1.17W (MAX) Read / 2.32 W (MAX) Write. 11. Dimensions: 100.1mm x 69.85mm x 7mm (2.5”). 12. Operating temperature: 0°C~70°C. 13. Storage temperature: -40°C~85°C. 14. Weight: 41g (2.5”). 15. Vibration operating: 2.17G Peak (7–800Hz). 16. Vibration non-operating: 20G Peak (10–2000Hz). 17. Life expectancy: 1 million hours MTBF. 18. Mounting Brackets for SSD Easily install 2.5” SSD into a 3.5” bay. 19. 3 years Warranty.. | عدد | 117 | 0 | |
| وحدة التخزين الخارجية من نوع SSD 512GBمع محفظة وكيبل | أجهزة | 1 | الكمية المتوقعة 50 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Form factor: 2.5”. 3. Capacities: 512GB. 4. Sequential: Read/Write up to 550 MB/s /400MB/s. 5. Dimensions: not exceeded H x W x L: 10 x50x 100 mm. . 6. Operating temperature: 0C° to 45C°. 7. Interface: Gen2, USB 3.1 with two Cables USB 3.1 & USB type c.. 8. Durability: IP55-rated for water and dust resistance.. 9. Shock Resistant: up to 1500G . 10. Vibration Resistant 5 gRMS, 10- 2000 Hz. 11. Enclosure and cable should be included. 12. Warranty: 3 years. | عدد | 118 | 0 | |
| لاب توب مع شريحة اتصال داخلية | أجهزة | 1 | الكمية المتوقعة 50 | . Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Minimum Intel® Intel® 13th gen Core™ i7-1365U Processor or above with vPro™ . 3. Minimum of (1x16GB) RAM.. 4. WIFI 6 (wireless AX211), Bluetooth®. 5. Intel 5000 5G global + eSIM. 6. Minimum of Mobility Solid State up to 500GB NVME M.2. 7. 14” FHD Anti-Glare LED-backlit.. 8. Integrated Intel® Iris Xe Graphics. 9. Support Trusted Platform Module (TPM) 2.0. 10. 87/88 key, full size, spill resistant Arabic/English keyboard with arrow keys.. 11. Touch pad pointer on palm rest.. 12. At least 1 Docking connector, 1HDMI, 2xUSB 3.0, 2xUSB type . 13. High quality speakers, Stereo headphone/Microphone.. 14. Integrated HD video webcam.. 15. 4-cell Lithium Ion battery with Express Charge.. 16. 65W AC adaptor, USB Type-C Gen9 Compliant. 17. Original Diagnostics and Drivers DVD included with each Box.. 18. Pre-printed NIC Logo from factory at rear side of Monitor.. 19. 3 years warranty on Site service. 20. 3 years Next Business Day on-site warranty upgrade including HW, SW and 24x7 access to manufacturer support center (3-3-3).. | عدد | 119 | 0 | |
| منظم كهربائي | أجهزة | 1 | الكمية المتوقعة 50 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Input 220V 50/60Hz . 3. 1500W. 4. Output: 4 UK 220V. 5. 3 years Warranty.. | عدد | 120 | 0 | |
| بطارية طاقة UPS عالي لاجهزة الشبكة | أجهزة | 1 | الكمية المتوقعة 20 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Electrical Specifications:. • Power Capacity: 1000VA / 1000W. • Nominal Output Voltage: 230V. • Output Voltage Distortion: Less than 2%. • Output Frequency: 50/60 Hz ±3 Hz (sync to mains). • Topology: Double conversion online. • Waveform Type: Sine wave. • Number of Power Outlets: 6 x IEC 60320 C13. • Bypass: Built-in automatic and manual bypass. 3. Input Specifications:. • Nominal Input Voltage: 230V. • Input Frequency: 40 - 70 Hz (auto-sensing). • Input Connections: IEC 60320 C14. • Input Voltage Range: 100 - 275V at 40% load; 176 - 275V at full load. 4. Battery Specifications:. • Battery Type: Lead-acid battery. • Included Battery Modules: 1. • Typical Recharge Time: 3 hours. • Expected Battery Life: 3 - 5 years. 5. Physical Specifications:. • Dimensions (H x W x D): 432 mm x 85 mm x 505 mm. • Rack Height: 2U. • Net Weight: 20.5 kg. 6. Communications and Management:. • Interface Ports: RJ-45 Serial, Smart-Slot, USB. • Control Panel: Multifunction LCD status and control console. • Audible Alarm: Audible and visible alarms prioritized by severity. • Emergency Power Off (EPO): Yes. 7. External Battery Pack . To extend the UPS runtime, the external battery pack can be connected.. • Battery Output Voltage: 48V. • Battery Type: Lead-acid battery. • Battery Mounting: Stand-alone battery stack. • Expected Battery Life: 3 - 5 years. • Dimensions (H x W x D): 432 mm x 85 mm x 536 mm. • Net Weight: 29.9 kg. 8. 19-Inch Rail Kit. 9. Include: 6 x C14-C15 1.8M cables. 10. 3 years Warranty. | عدد | 121 | 0 | |
| رأس شحن USB plus USB c | أجهزة | 1 | الكمية المتوقعة 350 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. min of 35W output. 3. 2 ports (1 USB-c + USB-A). 4. UK 220V. 5. 5. 3 years Warranty.. | عدد | 122 | 0 | |
| وحدة التخزين الخارجية من نوع SSD 256GBمع محفظة وكيبل | أجهزة | 1 | الكمية المتوقعة 100 | . Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Form factor: 2.5”. 3. Capacities: 256GB. 4. Sequential: Read/Write up to 550 MB/s /400MB/s. 5. Dimensions: not exceeded H x W x L: 10 x50x 100 mm. . 6. Operating temperature: 0C° to 45C°. 7. Interface: Gen2, USB 3.1 with two Cables USB 3.1 & USB type c.. 8. Durability: IP55-rated for water and dust resistance.. 9. Shock Resistant: up to 1500G . 10. Vibration Resistant 5 gRMS, 10- 2000 Hz. 11. Enclosure and cable should be included. 12. Warranty: 3 years. | عدد | 123 | 0 | |
| توصيله كهربائية | أجهزة | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Soft and durable extension cord is built to last and designed to resist tangling for frustration-free use.. 3. tangle-free cord. 4. wide spaced outlets to avoid blocking other sockets when the bulky adapter is connected. 5. mountable with mounting holes for installation. 6. Fire-resistant materials. 7. Robust extension sockets. 8. break-resistant special plastic material. 9. On/Off switch. 10. Input interface: UK plug 220v. 11. Output: 5 UK 220V. 12. 3 years Warranty.. | عدد | 124 | 0 | |
| كيبل بيانات USB C to USB C 1 8M | كيبل | 1 | الكمية المتوقعة 50 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Double-braided exterior . 3. Ultra-flexible silicone technology resists tangling and kinking. 4. supports PD fast charge up to 60W 20V/5A (max). 5. Cable Data transfer. 6. Transfer speed: up to 10Gbps. 7. Reversible USB-C connector. 8. USB cable length 1.8 M. 9. 3 years Warranty.. | عدد | 125 | 0 | |
| غلاف سيلكون حامي لجهاز البصمة اللاسلكي | غلاف | 1 | الكمية المتوقعة 350 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. 3mm flexible silicon to avoid fall shock. 2. clear color. 3. compatible with NIC FP devices etc(unity 20). 4. 3 years warranty | عدد | 126 | 0 | |
| قاعدة بصمة لاسلكي | قاعدة | 1 | الكمية المتوقعة 350 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. High Quality FP stand. 2. Charging simultaneously with USB-c chrager . 3. 3m sticker. . 4. 3 years warranty | عدد | 127 | 0 | |
| قارئ بطاقات الهوية | أجهزة | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. - The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics/reader device otherwise.. 1. Must be a brand name product.. 2. Up-to-date architecture.. 3. Ability to drive any type of ISO14443-A&B T=CL contactless smart cards.. 4. Ability to drive any type of MIFARE®contactless smart cards.. 5. Ability to drive any type of ISO7816 contact smart card or SIM/SAM card.. 6. Support for smart card with a higher baud rate (contact and contactless).. 7. Easily upgradeable download of the latest features.. 8. Standard USB Full speed interface, bus powered (no external power supply required).. 9. Unique USB serial number which enables that the device can be plugged into any USB slot on a computer without having to re-install the driver.. 10. Standard CCID interface for both smart card slot (contact and contactless).. 11. Standard HID interface for device administration.. 12. No need of a proprietary USB driver. The standard CCID and HID drivers of the computer can be used.. 13. PC/SC V2.0 compliant.. 14. Embedded protection against dual interface smart card damage and switch feature to select the active interface (contact or contactless).. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 15. 3 years Warranty.. | عدد | 128 | 0 | |
| كيبل بيانات USB C to USB C 1M | كيبل | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. Double-braided exterior . 3. Ultra-flexible silicone technology resists tangling and kinking. 4. supports PD fast charge up to 60W 20V/5A (max). 5. Cable Data transfer. 6. Transfer speed: up to 10Gbps. 7. Reversible USB-C connector. 8. USB cable length 1 M. 9. 3 years Warranty.. | عدد | 129 | 0 | |
| كيبل بيانات USB A to USB C 1M | كيبل | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. USB-A side should be USB 3.1. 3. cable must support up to 3A of power output for charging USB-C devices.. 4. Cable Data transfer. 5. Transfer speed: up to10Gbps. 6. Reversible USB-C connector. 7. USB cable length 1 M. 8. 3A charging output. 9. 3 years Warranty.. | عدد | 130 | 0 | |
| بصمة احادي محطات | أجهزة | 1 | الكمية المتوقعة 600 | Must meet NIC General HW requirements plus the following Minimum of requirements:. - Must be a brand name product. - The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 1. Capture Platen: 40.6 x 38.1 mm. 2. Frame Rate: 15 FPS. 3. Weight: 350 g. 4. Dual or Single flat fingerprints, Single rolled fingerprints - FAP 45. 5. Temperature, Operating -20 - 50 C. 6. Humidity, Operating 10% - 90% non-condensing. 7. Temperature, Storage -20 - 60 C. 8. Scan Data 8-bit grayscale. 9. Top Surface IP64-rated seal between top case and glass surface – IP54 for Entire device. 10. Interface USB 2.0 high speed – Connector USB-C. 11. Standards Compliance Appendix F, UL, FCC, CE, RoHS, REACH, NOM, UKCA, ISED, California Proposition 65. 12. Image Quality: Appendix F, Livescan and ID Flats (with or without silicone membrane). 13. Pixel resolution: 500dpi. 14. 8-bit grayscale (256 gray levels). 15. Capture Features:. • Auto Capture fingerprints for speed and efficiency. • For one, two, or 10 finger enrollment and verification. • Wet/dry finger image capture without pretreatment of hands or device recalibration. 16. Sensor Type: Optical . 17. 3 years Full Warranty.. | عدد | 131 | 0 | |
| بصمة احادي مكتبي | أجهزة | 1 | الكمية المتوقعة 1500 | Must meet NIC General HW requirements plus the following Minimum of requirements:. - Must be a brand name product. - The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 1. Supply Voltage 5.0V ±5%. 2. Supply Current—scanning < 150 mA (Typical). 3. Supply Current—idle mode < 40 mA (Typical). 4. Supply Current—suspend mode < 0.5 mA (Maximum). 5. Temperature, Operating -10 - 50 C. 6. Humidity, Operating 0% - 90% non-condensing. 7. Temperature, Storage -20 - 55 C. 8. Humidity, Storage 0% - 90% non-condensing. 9. Scan Data 8-bit grayscale. 10. Top Surface IP64-rated seal between top case and glass surface*. 11. Interface USB 2.0 High Speed. 12. Weight 245 grams. 13. Standards Compliance FIPS 201 PIV, Mobile ID FAP 30, RoHS, UL, USB, WEEE. 14. ESD IEC61000-4-2 Level 4. 15. Pixel resolution: 500dpi. 16. 8-bit grayscale (256 gray levels). 17. Scan capture area: 20.32 mm x 25.4 mm. 18. Reader size: 86mm L x 53mm W x 31mm H (+/-0.5mm). 19. USB 2.0 (High Speed). 20. Sensor Type: TFT / LES / Optical (ASK NIC to specify sensor type). 21. 3 years Full Warranty.. | عدد | 132 | 0 | |
| جهاز قزحية العين | أجهزة | 1 | الكمية المتوقعة 600 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. • Must be a brand name product. 1. Dimensions (WxHxD): 55.41″ x 2.21″ x 1.69″ (137.6mm x 56.3mm x 43mm). 2. Weight: 0.52lbs (240g). 3. Power Input: USB Powered (3.0 Port Only). Power Adapter Powered, 5VDC. Operational Power: 4.3 watts/Standby Power: 2.3 watts. 4. Iris Camera: 1.2MP Auto & Manual Dual Iris Capture with B&W Image Sensor. 5. Iris Capture Range: 11″~ 15″ (28cm ~ 38cm). 6. Face Image Camera: Face Camera CMOS – 5MP. 7. Flash: High Output Flash for Face Capture. 8. Interface: USB 2.0 (or higher). 9. Orientation Sensor: Built-in Orientation Sensor. 10. Indication: External: Blue LED – Power Indication, Green / Red / Amber LED – Status. Internal: Green LED for Right Eye Positioning. Sound (Optional by Application). 11. Speaker: 1.2W. 12. SDK: Windows – java. 13. Operating Temperature: (0°C ~ 50°C). 14. Storage Temperature: (-20°C ~ 95°C). 15. Humidity: 0 ~ 95% Non-condensing. 16. Certifications: CE, FCC, KC, Eye Safety, ISO Standard, KISA. 17. 3 years Full Warranty.. | عدد | 133 | 0 | |
| كاميرا ويب اعتيادية | أجهزة | 1 | الكمية المتوقعة 453 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product. 2. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 3. Must be a brand name product. 4. General:. • Product Type: Streaming webcam. • Sensor Type: 1/2.8" CMOS sensor with STARVIS™ technology. • Field of View (FOV): Adjustable from 80° to 103°. • Frame Rate:. o 1080p at 60fps. o 1080p at 30fps (Uncompressed). o 720p at 60fps. 5. Connectivity: USB 3.0 Type-C interface (the cable should be included). 6. Microphone: Built-in omnidirectional microphone. 7. Optics:. • Lens:. o F2.0 aperture lens. o Corning® Gorilla® Glass 3 for durability and clarity. • Auto Focus: Yes, with intelligent adjustment. • Light Compensation: Advanced adaptive light sensor for enhanced performance in low-light environments. • Light Sensors: STARVIS™ for enhanced sensitivity and clear image capture in low-light or high-contrast situations.. 8. Resolution:. • Maximum Resolution: 1920 x 1080 (Full HD). • Low Light Performance: Exceptional performance with STARVIS™ sensor for low-light clarity. 9. Compatibility:. • Operating Systems Supported:. o Windows 8.1 and 10 or higher. o macOS 10.10 or higher. • Software Supported: Works with popular video streaming platforms like OBS Studio, Streamlabs, Zoom, Microsoft Teams, and Skype.. 10. Power & Physical:. • Power Supply: USB 3.0 powered (No additional power required). • Mounting: Standard tripod thread and clip mount for easy attachment to monitors or tripods. • Dimensions:. o Diameter: 76.5mm (3.01 inches). o Depth: 60mm (2.36 inches). • Weight: 178g (6.28 ounces). 11. Other Features:. • Customization: Adjustable field of view, customizable frame rates, and real-time streaming capabilities. • Built-in Mic: Omnidirectional microphone for capturing clear audio during streams or video calls. • Privacy Features: Optional LED status indicator to show camera status. • Software Features: Razer Synapse software for configuring settings like FOV, resolution, and other preferences. 12. Light Performance:. • Adaptive Light Sensor: Provides clear image capture in low-light conditions by adjusting exposure settings. • High Dynamic Range (HDR): Yes, for more detailed and clear images in challenging lighting environments. 13. 3 years Warranty.. | عدد | 134 | 0 | |
| جهاز قزحية العين متقدم | أجهزة | 1 | الكمية المتوقعة 500 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. • Must be a brand name product. • Hardware Features. • CPU: Cortex-A53. • Storage: 2GB DDR3 (1866 Mbps, 1.35 V), 8GB eMMC. • OS: Linux Kernel Version 4.4. • FPGA: Spartan6 + 64MB Flash Memory. • Power: AC 100 ~ 240V, 90W. • Display:. • Size: 10.1 Inch (Diagonal) LCD with capacitive touch screen. • Resolution: 1280 x 800. • Interface: MIPI DSI. • Audio: . • Cocdec: Various sample rate (8 ~ 48 KHz). • Speaker out: YES. • Camera:. • Color Camera: 13MP, MIPI CSI-2, SoC, RGB888. • Iris Camera: 2.3MP, BW, Global Shutter x 2 Minimum 200pixel/cm in operating capture range. • Stereo Camera: 2.3MP, BW, Global Shutter x 2. • Capture Time: Less than 1 seconds for dual iris and face capture. • Illumination:. • IR LED: High Power LED 4EA x 2t. • External I/F:. • Ethernet: Ethernet 10/100 Mbps (should include High quality USB3 to RJ45 adaptor with each device “specs of adaptor are given by NIC on this document). • USB: USB2.0 Host/OTG:. • Memory: Micro -SD Socket. • Mechanics:. • Pan / Tilt Motor: Precision high spped step motor. • Iris Camera Lens: x12 Zoom & Auto Focus. • Capture Volume:. • Height (Tilt): ± 45 cm (120 cm ~210 cm at 75 cm when table height is 117 cm). • Width (Pan): ± 50 cm at 100 cm, ± 25 cm at 50 cm. • Distance: 50 cm ~ 100 cm. • Size: . • H x W x D: 41.8 cm x 23.7 cm x 10.45 cm (16.5” x 9.3” x 4.1”). • Weight: 8.8kg (19.4lbs). • Operating Environment: . • Operating Temperature: 32°F~113°F (0°C~45°C). • Storage Temperature: -4°F~203°F (-20°C~95°C). • Humidity: 5~95% non-condensing. • Automatically captures dual iris and face at the same distance.. • Standards : CE, FCC, Eye Safety, ISO and ICAO, RoHS. 10. 3 years Warranty.. | عدد | 135 | 0 | |
| بصمة احادي لاسلكي | أجهزة | 1 | الكمية المتوقعة 250 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product.. 2. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 3. Image Resolution: 500 PPI. 4. Image Size: 300 x 400 pixels. 5. Effective Sensing Area: 18.1 mm x 22.9 mm. 6. Sensing Area: 15.24 mm x 20.32 mm. 7. Image Grayscale: 256 levels (8-bit). 8. Light Source / Typical Lifetime: LED / 60,000 hours. 9. Fingerprint Capture Time: 0.2 ~ 0.5 second with Smart Capture. 10. Bluetooth wireless connectivity for no-hassle, cable-free convenience:. • Class 2 Module . • Dual-mode Bluetooth / Low energy (BLE) radio . • Fully qualified Bluetooth 4.0 . • Supports 802.11 coexistence. 11. Battery:. • Rechargeable lithium ion battery and micro USB OR USB-C cable for charging along with compatible UK power adaptor.. • Rated Capacity: not less than 1000 mAh . • Internal Resistance: ≤70 mΩ . • Voltage: 3.7 V (nominal), 4.2 V (charged), 2.75 V (discharge cut-off) . 12. Rugged, high-performance, maintenance-free optical sensor resistant to scratches, impact, vibration and electrostatic shock. 13. Fast recognition and high quality imaging of difficult fingerprints (dry, wet, scarred) in challenging environments. 14. Automatic finger detection technology. 15. Self-adjusting scanning technology. 16. Device authentication technology. 17. Fingerprint template encryption. 18. Latent print rejection. 19. Dual direction finger guide . 20. Dimensions: 45.2 mm (W) x 103.3 mm (L) x 36.7 (H) mm . 21. Operating Temp: / Humidity: -10°C ~ 60°C / 90% RH (max., non-condensing) . 22. Charging Temp: 10°C ~ 45°C . 23. Weight: 90 g. 24. Current Consumption: 200 mA (max. Operating), 500mA (max. Charging & Operating) . 25. USB-C Interface ”Preferred” OR micro USB Interface for charging . 26. labeling each device with “High Quality sticker or mini PVC hanging tag” as an indication of “counter number, office number … etc” based on NIC decision.. 27. High quality silicone transparent protector case for the device to avoid damage in case of falling with enough protected thickness.. 28. Device wall/glass plastic housing mount OR elegant stable magnetic stand/holder, both with ability of connecting charging cable easily while mounted and ability of holding the cable on discharging.. 29. 3 Years Warranty. | عدد | 136 | 0 | |
| كاميرا رقمية | أجهزة | 1 | الكمية المتوقعة 310 | Must meet NIC General HW requirements plus the following minimum requirements:. 1. Must be a brand name product. 2. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 3. Must be a brand name product. 4. Resolution capable of producing photos at least 24.1 Mega pixels.. 5. Flash to replicate natural daylight. . 6. EF-S Lens are included. 7. Auto focus (9 AF points(f/5.6) cross type at center), Auto-iris, Auto white balance, and Auto exposure.. 8. Full color spectrum. 24-bit color.. 9. Video capability to allow user to see live subject on PC monitor and capture still picture at will.. 10. Standalone still picture mode.. 11. Includes all necessary drivers and SDK to accomplish PC capture of pictures.. 12. TWAIN compliant with drivers for Windows 10.. 13. PC Powered connection or 230/400 V DC adapter. Cameras, which are fully battery dependant, are NOT acceptable.. 14. Bidder MUST identify and quote for any consumables necessary for proper operation of camera, including, but not limited to specialized cleaning material.. 15. Remote Control of Camera. 16. Must have Java SDK. 17. Interface: Hi-Speed USB (Mini usb). 18. Minimum of 1.8M length High Quality USB cable 90-degree right angel Gold plated (cable angle directed to the bottom of camera) from Camera PC (Male USB-A to Mini USB-B). 19. Support EOS system.. 3 years Full Warranty. | عدد | 137 | 0 | |
| كاميرا ويب متقدمة | أجهزة | 1 | الكمية المتوقعة 750 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product. 2. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 3. Must be a brand name product. 4. General Specifications:. • Product Type: AI-powered PTZ (Pan-Tilt-Zoom) camera. • AI Features: Auto framing, auto zoom, object tracking. • Camera Type: 4K Ultra HD webcam with AI tracking. 5. Camera Features:. • Image Sensor:. o Sensor Type: 1/2.8" CMOS sensor. o Resolution: 4K (Ultra HD). o Frame Rate: Up to 60 fps in 1080p, 30 fps in 4K. • Field of View (FOV): 80°. • Lens Type: Fixed lens. • Zoom: AI-powered digital zoom (up to 4x). • Autofocus: Yes, AI-based autofocus. • Pan & Tilt Range:. o Pan Range: 90° (45° to the left, 45° to the right). o Tilt Range: 60° (30° up, 30° down). o Motorized PTZ: Yes (for smooth and silent movement). 6. Resolution and Output:. • Video Resolution:. o 4K (3840 x 2160) at 30 fps. o 1080p (1920 x 1080) at up to 60 fps. o 720p (1280 x 720) at 60 fps. 7. • Video Compression: H.264 video compression. • Supported Interfaces:. o USB Connection: USB 3.0 / USB 2.0. o Connection Type: Plug and play via USB-C (USB 3.0 or USB 2.0). o Output Formats: UVC (USB Video Class), UAC (USB Audio Class). AI Features: (ASK NIC FIRST). • Auto Framing: Automatically frames the subject and adjusts to keep it in view.. • Auto Zoom: Zooms in automatically to frame the subject or object.. • Person Tracking: AI-driven subject tracking for active presenters and dynamic movements.. • Gesture Control: Gesture-based controls (start/stop, pan, tilt, zoom).. • Face Detection: Optimizes framing and zooming around the face.. 8. Audio:. • Microphone: Built-in omni-directional microphone with noise reduction. • Audio Input: Supports external microphone (via USB-C port). • Audio Features: Echo cancellation and noise reduction. 9. Connectivity:. • USB Interface: USB 3.0 / USB 2.0 / USB-C (for power and data). 10. • Compatibility:. o Windows: Windows 7 or higher. o Mac: macOS 10.12 or higher. o Linux: Linux support via UVC. o Software Support: Compatible with popular software like Zoom, Microsoft Teams, Skype, OBS Studio, etc.. 11. Physical Specifications:. • Dimensions:. o Camera Size: 90mm x 70mm x 60mm (L x W x H). o Weight: 210g. 12. • Mounting Options:. o Can be mounted on a tripod or placed on a desktop stand. o 1/4" thread for tripod mounting. 13. Power and Energy:. • Power Supply: Powered via USB-C (5V DC). • Power Consumption: 5V/500mA. • Power Indicator: LED status indicator. 14. Operating Temperature:. • Temperature Range: 0°C to 40°C (32°F to 104°F). 15. Software & Control:. • Control App: camera app for Windows and macOS (for advanced settings and customization). • Camera Control: Adjustable settings for pan/tilt speed, zoom, and auto-framing settings via the app or gestures.. 16. • Includes SDK. 17. Package Contents:. • Camera. • USB-C Cable (for power and data). • Desktop Stand (integrated into the camera body). • User Manual. 18. Additional Features:. • AI Tracking Mode: Keeps the subject in the frame during dynamic movements, adjusting both zoom and pan.. • Plug and Play: No additional drivers or software needed for basic use.. • Multi-platform Compatibility: Works with Windows, macOS, and Linux, and integrates with a variety of video conferencing and streaming software.. 19. • 3 years Full Warranty. | عدد | 138 | 0 | |
| يد تحريك الكاميرا | أجهزة | 1 | الكمية المتوقعة 600 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product. 2. The Arm of digital camera rotator .. 3. High quality.. 4. Compatible with existing camera stand & Canon Cameras.. | عدد | 139 | 0 | |
| محول كهرباء للكاميرا | أجهزة | 1 | الكمية المتوقعة 100 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 5. Must be a brand name product. 6. PC Powered connection or 230/400 V DC adapter.. 7. Worldwide Input voltage: AC 100~240V, 50~60Hz; Output: DC 7.4V / 2A 14.8W.. 8. Compatible with Canon Cameras. 9. 3 years Full Warranty. | عدد | 140 | 0 | |
| قاعدة كاميرا قزحية العين | قاعدة | 1 | الكمية المتوقعة 150 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. High Quality Customized Steel Stand for IRIS Cameras.. 2. Adjustable Length based on counter size.. 3. Hidden hole for wiring smoothly.. 4. ask NIC for customization (Vendor should take the exact dimensions from NIC before manufacturing where site survey and device specifying is needed). 6. 3 years Full Warranty. | عدد | 141 | 0 | |
| قاعدة كاميرا مخصصة | قاعدة | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. High Quality Customized Steel Stand for WEB Cameras as shown on bellow imaginary photos.. 2. Adjustable Length based on counter size.. 3. optional:Arm for rotating camera vertically and horizontally.(ASK NIC). 4. Hidden hole for wiring smoothly.. 5. ask NIC for customization (Vendor should take the exact dimensions from NIC before manufacturing where site survey and device specifying is needed). 6. 3 years Full Warranty. | عدد | 142 | 0 | |
| كيبل طابعة 2متر MALE A to B | كيبل | 1 | الكمية المتوقعة 600 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. High Quality USB 2.0 - A Male to B Male Cable. 2. High-Speed Printing: The data transmission speed of this USB A to B cable reaches to 480Mbps, so you can print documents or resume in seconds without waiting anymore. Also, this USB a to b is backward with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps) standard devices.. 3. Minimum 2M length. | عدد | 143 | 0 | |
| قاعدة كاميرا رقمية | قاعدة | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. High Quality Customized Steel Stand for digital Cameras as shown on bellow photos.. 2. Adjustable Length based on counter size (between 70 – 85 cm).. 3. An average diameter of 3 – 3.5cm. 4. The steel rod has internal screw thread at its end from counter side to be attached with the external thread piece.. 5. The external thread should be on steel as well and installed securely on the counter to allow securing the steel rod.. 6. A hole with enough room to fit charger and data cable.. 7. An edge at the top allowing camera base to fit on the steel rod.. 8. Bellow photos are explaining the requirements (excluding the camera and cables). 9. Vendor should take the exact dimensions from NIC before manufacturing where site survey and device specifying is needed.. 10. 3 years Full Warranty. | عدد | 144 | 0 | |
| كيبل طابعة 5متر MALE A to B | كيبل | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. High Quality USB 2.0 - A Male to B Male Cable. 2. High-Speed Printing: The data transmission speed of this USB A to B cable reaches to 480Mbps, so you can print documents or resume in seconds without waiting anymore. Also, this USB a to b is backward with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps) standard devices.. 3. Minimum 5M length. | عدد | 145 | 0 | |
| ماسح الجواز | أجهزة | 1 | الكمية المتوقعة 300 | The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 1. Must be a brand name product. 2. TECHNICAL DATA Footprint: L 190 mm (7.48 inches) × W 143 mm (5.63 inches) × H 93 mm (3.66 inches). 3. Scan Window: L 94 mm (3.7 inches) × W 131 mm (5.2 inches). 4. Light sources: IR, visible light and UV-A, extended illumination package for in-depth security checks (coaxial light, oblique light, OVD). 5. Image formats: JPG, BMP, PNG. 6. Resolution: Up to 900 dpi . 7. Interface: USB 3.0 host interface USB powered LAN (Rest API). 8. Status Indicator: visible Display – Audible (ASK NIC before). 9.Scan Features:. • ID and passport image scanning under visible, IR and UV-A light. • Extended illumination package: coaxial and oblique light, . • Scan without full cover for all light sources possible for easier user handling. • Optimized for OCR data collection. • RFID & NFC Reading Module: integrated RFID module is a dual antenna design that is especially designed for ePassport and NFC reading. • Document size detection . • Passport or ID card portrait available as separate image. • Reflection removal scan technology prevents spots caused by laminate or holographic print. • Automatic scan trigger based on document detection. • Automatic crop and rotate including back- ground elimination of scanned image. • Move Detection: ensures that only non-blurred scans are processed. • Rugged Design: solid box and security glass on scan area. • Chip Card Module: integrated chip card reader for reading contact chip and smart cards (ASK NIC before). • Light: integrated & programmable multicolor LED. • Sound: programmable buzzer with adjustable volume and pitch. • Document clip for enhanced user guidance (optional) Certifications. • CE, FCC, WEEE, RoHS, BSI . • Host Interface: USB 3.0 super-speed. • USB powered. 10. 3 years Warranty.. | عدد | 146 | 0 | |
| حامل كاميرا | حامل | 1 | الكمية المتوقعة 600 | Must meet NIC General HW requirements plus the following Minimum of requirements:. • Must be a brand name product. • Rotatable Camera mount 360°.. • High quality and the arm should be exact same on photos bellow includes the steel and plastic parts.. • Compatible with existing camera stand & Canon Cameras.. • Arm can be reached from user operating position easily. (arm can be longer or L shape to ease the use) . • 3 years Full Warranty. • Photo: . | عدد | 147 | 0 | |
| قارىء باركود | أجهزة | 1 | الكمية المتوقعة 500 | - The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 1. Must be a brand name product. 2. Laser sensor.. 3. Reads all standard 1-D barcodes including but not limited to: UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13, Code 39, Code 39 Full ASCII, Trioptic Code 39, Code 93, UCC/EAN, Code 128, Codabar, I2of5, D2of5.. 4. Must read barcodes with any rate of compression within the specified standard.. 5. Easy firmware upgrade in the field.. 6. Small and light weight.. 7. Easy to use. 8. Trigger-less operation. 9. Must have a fast decode capability (less than 2 seconds).. 10. Must have a wide read range of at least 2 inches to 13 inches.. 11. Wide angle reading. Field of View at least 32° horizontal / 24° vertical.. 12. Focal Point : High Density 6.4cm from nose of scanner Read in very dim lighting conditions.. 13. High resolution Fuzzy Logic capability to enable reading of slightly damaged barcodes. Strong ability to recognize slightly soiled, skewed, or otherwise damaged bar codes.. 14. Rugged design.. 15. IEC529 rating IP53DW (resistant).. 16. Withstands multiple five-foot (152cm) drops onto concrete; over 100 drops to a countertop.. 17. Sealed and protected from windblown dust and rain.. 18. USB connection.. 19. Handheld Gun Type . 20. 3 years Full Warranty. | عدد | 148 | 0 | |
| لوحة مفاتيح مع قارىء وثائق السفر | أجهزة | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. - The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 1. Must be brand name.. 2. Arabic / English characters.. 3. Must conform to standard Arabic character positioning. E.g. Such that the Arabic character 'ذ ' must be immediately to the left of the QUERTY keyboard number '1'.. 4. Types of keyboard:. f. Keyboard with OCR, smart card and e-passport reader and Arabic Engraved lettering with the following specs:. • High speed USB base technology.. • ICAO conform RFID reading for biometric passports, and conventional travel documents.. • Fully integrated ICAO RFID Reader.. • Five different data entry devices: e-Passport Reader, Keyboard, OCR, BCR and MSR.. • High speed USB.. • No additional standalone hardware or power supply is required.. 5. 3 years Warranty.. | عدد | 149 | 0 | |
| طابعة الوثائق الشخصية الاعتيادية | أجهزة | 1 | الكمية المتوقعة 300 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product and certified by NIC.. 2. Must be Dual-Sided Printing and single or Dual Sided lamination Standard.. 3. Print head: Lifetime. 4. Print Resolution 300 DPI. 5. Single-side YMC Print Speed Up to 1200 cards per 8-hour shift/24 seconds per card (YMC with transfer). 6. Single-side YMCK Print Speed Up to 992 cards per 8-hour shift/27 seconds per card (YMCK with transfer). 7. Dual-side YMCKK Print Speed Up to 720 cards per 8-hour shift/40 seconds per card (YMCKK with transfer). 8. Multiple Print Mode Selection. 9. Simultaneous Printing / Encoding. 10. Memory 1GB RAM. 11. Printer Password Protection .. 12. Locking Card Input Hopper and Output Hopper and supplies. . 13. Robust printer .. 14. Lockable Printer and Laminator Housing. 15. Security Resin Erase Standard. 16. Network Data Encryption. 17. Interface USB 2.0 & Ethernet standard. 18. One-Wire USB Encoding Standard. 19. Internal Ethernet Server Standard. 20. Supported Software Drivers Windows® 10 / 11 / Server 2016 / Server 2019 / Server 2022. 21. Supported Access Control Credential Programming. 22. Power Input 100-240 VAC, 3.5 A MAX, 50 Hz - 60 Hz. 23. Agency Approvals UL, CE, FCC, IC, IFTEL, KC, VCCI, MIC, NCC, WPC, BIS, ENACOM. 24. Graphical OLED. 25. It should be work on consumables and custom hologram configured by NIC . 26. Card Input Capacity (2 Hoppers) 200 cards (.030” / .762mm). 27. can be dual Input Hopper Capability . 28. Card Output Capacity (1 Hopper) 200 cards (.030” / .762mm). 29. Card Thickness .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm. 30. Card Exception Feed. 31. Card Cleaning Station . 32. Cartridge Loadable Ribbons. 33. Fluorescing/UV Ribbon. 34. Full-Color – YMC (maximum images per roll) 750. 35. Full-Color – YMCK (maximum images per roll) 500. 36. Full-Color – YMCKK (maximum images per roll) 500. 37. Full-Color – Half-Panel YMCK (maximum images per roll) 1000. 38. HDP Film (maximum images per roll) 1500. 39. Dimensions 15.5" H x 28.2" W x 14.0" D / 394mmH x 716mmW x 356mmD. 40. Weight (printer only) Dual-sided only: 12”H x 22”W x 11”D / 30.5cmH x 55.9cmW x 27.9cmD42. Heavy Duty Enclosure. 41. Fully Accessible Card Path. 42. Dual-Sided Simultaneous Lamination. 43. Accept ISO Magnetic Encoding. 44. Accept Contact Smart Card Encoding iCLASS® Standard / SE / SR / Seos, MIFARE Classic®, MIFARE / DESFire® EV1 / EV2, HID Prox . 45. Accept Contactless Smart Card Encoding. 46. 3 years Full Warranty. . | عدد | 151 | 0 | |
| قارىء البصمة اللاتلامسي | أجهزة | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. Must be a brand name product. 1. CPU: Nvidia ARM Cortex-A15 Quad-Core 2.1GHz. 2. 4.3" WVGA color capacitive touchscreen.. 3. Loudspeaker & microphone. Intercom function. 4. Audio & video player. 5. Touchless fingerprint sensor. Hand presence detection. QR code scanning capability. 6. Contactless reader options:. Prox,iClass,MIFARE/DESFire. 7. Tamper switches. 8. Internal storage capacity: 16GB Flash,2GB RAM. - 20.000 user record (2*4 finger each) for 1:N identification, extendable to 40.000 or 100.000 with license. - 250.000 IDs in authorized user list. - 1 Million transaction logs. 9. Network/Communication:. - Ethernet, RS485, RS422,USB. - Wi-Fi and 4G option. - (should include High quality USB3 to RJ45 adaptor with each device “specs of adaptor are given by NIC on this document). 10. Input/outputs:. Wiegand In & Out (customizable up to 512 bits),QSDP, Door Relay, 3 GPI (including Door monitoring), 3 GPO. 11. Power supply. 12 to 24 V DC (2.5A min @12V). Power over Ethernet with PoE+ switches. • If NIC ask to have 220v UK power on adaptor,it should be provided and included.. 12. Operating conditions:. - Temperature: -10˚C to 55˚ (14˚F to 131˚F). - Humidity: 10% to 80% (non condensing). 13. Ingress protection: IP65. 14. HxWxD = 250*152*216 mm (909*6*805 in.). 15. EMC/Safety standards: CE, CB, FCC. 16. RoHS, REACh and WEEE compliant. 17. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 18. 3 years Full Warranty.. | عدد | 152 | 0 | |
| طابعة الوثائق الشخصية المتقدمة | أجهزة | 1 | الكمية المتوقعة 190 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product .. 2. Dual-Sided Printing Standard. 3. Print head: Lifetime. 4. Print Resolution 300 DPI. 5. Single-side YMC Print Speed Up to 1200 cards per 8-hour shift/24 seconds per card (YMC with transfer)*. 6. Single-side YMCK Print Speed Up to 992 cards per 8-hour shift/29 seconds per card (YMCK with transfer)*. 7. Dual-side YMCKK Print Speed Up to 720 cards per 8-hour shift/40 seconds per card (YMCKK with transfer)*. 8. Multiple Print Mode Selection. 9. Simultaneous Printing / Encoding. 10. Memory 32MB RAM. 11. Printer Password Protection Workbench and display. 12. Locking Card Input Hopper. 13. Locking Card Output Hopper. 14. Lockable Printer and Laminator Housing. 15. Security Resin Erase Standard. 16. Network Data Encryption. 17. Interface USB 2.0 & Ethernet standard. 18. One-Wire USB Encoding Standard. 19. Internal Ethernet Server Standard. 20. Supported Software Drivers Windows® Server 2016 (64 bit) or later and 10 or later versions.. 21. (32 & 64 bit); Mac OS X v10.4/v10.5; and Linux***. 22. Power Input 100-240 VAC, 3.5 A MAX, 50 Hz - 60 Hz. 23. Agency Approvals UL, CE, IC, FCC Class-A, CCC, BSMI, KC, MIC, S-Mark. 24. Touch Screen Display 3.2” display for status and help information. 25. Dual-Cooling Fans. 26. Replaceable Fan Filter. 27. Card Input Capacity (2 Hoppers) 400 cards (.030” / .762mm). 28. Dual Input Hopper Capability Yes. 29. Card Output Capacity (1 Hopper) 200 cards (.030” / .762mm). 30. Card Thickness .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm. 31. Card Exception Feed. 32. Card Cleaning Station Two. 33. Cartridge Loadable Ribbons. 34. Fluorescing/UV Ribbon. 35. Full-Color – YMC (maximum images per roll) 750. 36. Full-Color – YMCK (maximum images per roll) 500. 37. Full-Color – YMCKK (maximum images per roll) 500. 38. Full-Color – Half-Panel YMCK (maximum images per roll) 1000. 39. HDP Film (maximum images per roll) 1500. 40. Dimensions 15.5" H x 28.2" W x 14.0" D / 394mmH x 716mmW x 356mmD. 41. Weight (printer only) Dual-sided only: 61 lbs / 27.7 kg. 42. Heavy Duty Metal Enclosure. 43. Fully Accessible Card Path. 44. Dual-Sided Simultaneous Lamination. 45. Andon Production Status Light. 46. ISO Card Flattener. 47. Laser Engraving Q4, 2012. 48. ISO Magnetic Encoding. 49. Contact Smart Card Encoding. 50. Contactless Smart Card Encoding. 51. Printer to computer USB cable at least 3M length. 52. 3 years Full Warranty.. | عدد | 153 | 0 | |
| طابعة ايصالات | أجهزة | 1 | الكمية المتوقعة 530 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product. 2. Dot Matrix or Thermal Line printing.. 3. Minimum of 200 dpi X 200 dpi resolution.. 4. Print width 80mm.. 5. Minimum of range of total label thickness 0.06mm to 0.07mm. 6. Print Speed Minimum of 200 mm per second. 7. Minimum of 4KB/45 byte data buffer. 8. Interfaces Bi-directional parallel, RS-486, USB, 10 Base-T I/F.. 9. Compatible with Windows 10 or later versions.. 10. Bar Codes/Symbologies UPC-A, UPC-E, JAN8 (EAN), JAN13 (EAN), CODE 39, CODE 93, CODE 128, ITF, CODABAR. 11. Field upgradeable to accept new symbologies within its resolution.. 12. USB 2.0 Interface.. 13. Printer to computer USB cable at least 1.5M length. 14. Small footprint/ for use in locations with low desktop real-estate availability.. 15. TBS: 220 V , 24VDC ± 7 %regulated Power Supply (with AC adapter if necessary).. 16. 3 years Full Warranty.. | عدد | 154 | 0 | |
| قارىء الجواز مع RFID | أجهزة | 1 | الكمية المتوقعة 200 | Must meet NIC General HW requirements plus the following Minimum of requirements:. - The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 1. Must be brand name.. 2. High speed USB Interface.. 3. USB powered. 4. Passport Reader (OCR): bidirectional swipe reader for all ICAO compliant (travel) documents, ID cards, passports, visas as well as any MRZ card . 5. MSR Reading Module: integrated bidirectional magnetic stripe reader (3-tracks). 6. Water and Dust Resistant: IP54 certification. The technical design of the IDenty chrom consideres 100% ingress protection (IP). The swipe reader is completely IP54 certified. This means that ALL components, including the OCR/MSR swipe slot, are protected against dust and water spillages.. 7. RFID Reading Module: integrated RFID module to read e.g. biometric passports and Mifare cards. 8. Audible and visible status indicator. 9. CE, FCC, WEEE, RoHS, IP54 Cerified. 10. L 180 mm (7.09 inches) × W 60.8 mm (2.39 inches) × H 34.8 mm (1.37 inches). 11. 3 years Warranty.. | عدد | 155 | 0 | |
| جهاز البصمة العشري المتقدم | أجهزة | 1 | الكمية المتوقعة 800 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product. 2. Meet FBI /IAFIS Image Quality Specification EFTS Appendix F (CJIS RS0010).. 3. NIST/AFIS interface. 4. Forensic quality (flat & Rolls) fingerprints. 5. Quality check with visual and audible alerts. 6. Automatic fingerprint sequencing. 7. Automatic duplicate print checking. 8. Auto Capture, Flex Flats, FlexRolls, wet and dry finger image capture without pretreatment of hands or device recalibration. 9. Intelligent capture features ensure quality images. 10. Water and dust protected, rugged case.. 11. Filter and reject residuals ghost fingerprint images.. 12. Scanner Resolution Enhanced Definition 500 ppi image capture output, with square pixels. 13. Scanner Dynamic Range True 8 bits/pixel = 256 gray levels. 14. SDK : L Scan® Essentials 7.0 or later; LScan® Master. 15. Interface : USB 2.0 Org Certified. 16. Power Source: Must obtain form USB ( Single point Interface for data and Power). 17. Minimum Area for Image Capture : 3.2” x 3.3” (8.13 cm x 8.38 cm). 18. Operating Temperature: 0-50 Degree C.. 19. Humidity Range: 10-90%. 20. rugged case, IP 54. 21. Compliance with IAFIS and NIST image standard. 22. Additional standard compliance.. 23. Support MS windows 32,64 bits.. 24. Sensor Type: Optical.. 25. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 26. 3 years Full Warranty.. | عدد | 156 | 0 | |
| جهاز البصمة العشري | أجهزة | 1 | الكمية المتوقعة 300 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product. 2. Meet FBI /IAFIS Image Quality Specification EFTS Appendix F (CJIS-RS0010).. 3. NIST/AFIS interface. 4. Forensic-quality (SLAP only) OR (SLAP & ROLLS) fingerprints. 5. Quality check with visual and audible alerts. 6. Automatic fingerprint sequencing. 7. Automatic duplicate print checking. 8. Automatic Capturing without operator action (SLAP only) OR (SLAP & ROLLS).. 9. Water and dust protected, rugged case.. 10. Filter and reject residuals ghost fingerprint images.. 11. Scanner Resolution Enhanced Definition 500 ppi image capture output, with square pixels. 12. Scanner Dynamic Range True 8 bits/pixel = 256 gray levels. 13. Interface : USB 2.0 Org Certified. 14. Power Source: Must obtain form USB ( Single point Interface for data and Power). 15. Minimum Area for Image Capture :3.2” * 3.0”.. 16. Operating Temperature: 0-50 Degree C.. 17. Humidity Range: 10-90%. 18. Compliance with IAFIS and NIST image standard. 19. Additional standard compliance.. 20. Support MS windows 32,64 bits.. 21. Sensor Type: Optical.. 22. The company/ vendor is responsible for all integration related to their devices on NIC systems. This is the only way to prove the accuracy and reliability of that device. NIC will not approve any biometrics device otherwise.. 23. 3 years Full Warranty.. | عدد | 157 | 0 | |
| طابعة ليزر أبيض وأسود | 1 | الكمية المتوقعة 1000 | Must meet NIC General HW requirements plus the following Minimum of requirements:. 1. Must be a brand name product. 2. laser printer.. 3. Hi-speed USB2.0 port connection.. 4. Minimum of Memory 512 MB.. 5. Processor is 1200MHz or higher.. 6. ARABIC/LATIN Bi-Directional.. 7. 45 page per minute or higher printing.. 8. Minimum of 1200 x 1200 dpi resolution.. 9. Display: 2.7-in (6.86 cm) QVGA LCD (color graphics) rotating (adjustable angle). 10. A4 and Letter Size Feeder tray with Minimum of 250-sheet capacity.. 11. Printer shall accept freely adjustable paper sizes through a manual feed slot.. 12. 220 V regulated Power Supply.. 13. Printer to computer USB cable at least 1.8M length. 14. 3 years Full Warranty. | عدد | 158 | 0 |
157 بند
المستندات الداعمة (12 ملف)
| اسم المورد | قيمة العرض (ر.س) | قيمة الترسية (ر.س) | النتيجة الفنية | الحالة |
|---|---|---|---|---|
| شركة الامان الحديثه للطاقه المحدودة | 2,328,191.10 | — | غير مطابق | مشارك |
| شركة المعمر لانظمة المعلومات | 1,609,228.35 | — | مطابق | مشارك |
| شركة الجريسي لخدمات الكمبيوتر واجهزه الاتصالات شركة مجموعه الجريسي | 2,532,350.60 | — | غير مطابق | مشارك |
| شركة تحكم التقنية المحدوده شركة شخص واحد | 2,045,528.00 | — | غير مطابق | مشارك |
| الشركة العربية لخدمات الانترنت وا لاتصالات شركة مساهمة سعودية مدرجة | 2,769,861.46 | — | مطابق | مشارك |
| شركة تقنية اليم للتجارة | 1,786,411.15 | — | مطابق | مشارك |
| شركة بعد للاتصالات السلكية واللاسلكية شركة شخص واحد | 1,673,584.65 | — | غير مطابق | مشارك |
| شركة المعمر لانظمة المعلومات | 1,609,228.35 | 1,609,228.35 | — | مرسّى |
الآليات
القائمة الإلزامية
آلية وزن المحتوى المحلي في التقييم المالي
معايير التقييم
معايير التقييم الفني
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم الفني |
معايير التقييم المالي
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم المالي | السعر | التكلفة الكلية | 100% |
أخبار المنافسة
title
تاريخ الإنشاء
value
20/09/46 01:57:06 م
title
تاريخ فتح العروض
value
23/03/47 01:00:00 م
title
تمديد تواريخ المنافسة
value
تاريخ فتح العروض23/03/47 01:00:00 مآخر موعد لتقديم العروض23/03/47 12:00:00 مآخر موعد لإستلام الإستفسارات17/03/47 12:00:00 ص
title
تاريخ الترسيه
value
28/09/1447