منافسة عامة
✓ مرسّى
تأمين تجهيزات للاقسام الهندسية بكلية التطبيقات الصناعية ببيش
جامعة جازان
رقم المنافسة
250539007776
المعرّف
#945484
عنوان الضمان الإبتدائى
جامعة جازان البرج الاداري الدور الاول غرفة رقم 147
الغرض من المنافسة
تأمين تجهيزات للاقسام الهندسية بكلية التطبيقات الصناعية ببيش
| التاريخ | ميلادي | هجري |
|---|---|---|
| تاريخ النشر | 2025/05/23 21:57 | — |
| آخر موعد للاستفسارات | 2025/07/03 | 1447-01-08 |
| آخر موعد تقديم العروض | 2025/07/07 10:00 | 1447-01-12 |
| موعد فتح العروض | 2025/07/07 10:00 | 1447-01-12 |
| موعد فحص العروض | — | — |
| التاريخ المتوقع للترسية | 2025/06/25 | 1446-12-29 |
| تاريخ بدء الأعمال | 2025/06/30 | 1447-01-05 |
| تاريخ خطاب تأكيد المشاركة | — | — |
| بداية إرسال الأسئلة | 2025/07/07 | 1447-01-12 |
| أقصى مدة للإجابة | 10 يوم | |
| مكان فتح العروض | جامعة جازان البرج الاداري الدور الاول | |
| مدة الوقفة | 5 يوم |
موقع التنفيذ
مجال التصنيف
الأنشطة
- • أنشطة التعليم
وصف المنافسة
تأمين تجهيزات للاقسام الهندسية بكلية التطبيقات الصناعية ببيش
جدول 1 المعدات والأجهزة - نموذج عام
| البند | العدد | وصف البند | المواصفات | وحدة القياس | الرقم التسلسلي | منتج من القائمة الإلزامية |
|---|---|---|---|---|---|---|
| 1 | 1 | محلل حجم الجسيمات | Descrption: Particle size analyzers are used to determine the size and distribution of particles making up a material. Particle size analyzers are used in numerous fields for research and development, manufacturing and for quality control and product testing. Two of the main types of particle size analyzers dynamic light scattering and laser particle analyzers. Dynamic light scattering analyzers measure particles in solutions in the 0.6 nm to 6 um range. Laser diffraction analyzers are used for particles in a material within the range of 10 nm to 3 mm. "تُستخدم أجهزة تحليل الجسيمات لتحديد حجم وتوزيع الجزيئات التي تتكون منها المادة. وتُستخدم أجهزة تحليل حجم الجسيمات في العديد من المجالات للبحث والتطوير والتصنيع ومراقبة الجودة واختبار المنتجات. هناك نوعان رئيسيان من محللات حجم الجسيمات: تشتيت الضوء الديناميكي ومحللات جسيمات الليزر. تقوم أجهزة تحليل تشتت الضوء الديناميكي بقياس الجزيئات في المحاليل في نطاق يتراوح من 0.6 نانومتر إلى 6 ميكرومتر. تُستخدم أجهزة تحليل حيود الليزر للجسيمات الموجودة في مادة يتراوح حجمها بين 10 نانومتر و3 ملم ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 1 | 0 |
| 2 | 2 | الموصلية الحرارية للأجهزة السائلة | Thermal conductivity measurement of liquids is a critical process in various scientific and engineering fields. It involves determining how well a liquid conducts heat, which is essential for material development, quality control, and research. Understanding the thermal conductivity of liquids is crucial in developing new materials, particularly in industries like lubricants, coolants, and polymers. يعد قياس التوصيل الحراري للسوائل عملية حاسمة في مختلف المجالات العلمية والهندسية. ويتضمن تحديد مدى جودة توصيل السائل للحرارة، وهو أمر ضروري لتطوير المواد ومراقبة الجودة والبحث. إن فهم التوصيل الحراري للسوائل أمر بالغ الأهمية في تطوير مواد جديدة، وخاصة في صناعات مثل مواد التشحيم، وسائل التبريد، والبوليمرات. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 2 | 0 |
| 3 | 2 | الموصلية الحرارية لجهاز المسحوق العازل | Thermal conductivity of insulating powder is a crucial parameter in the field of thermal insulation. It measures how well the insulating powder, such as asbestos, conducts heat. Insulating powders are widely used in various industries for thermal insulation purposes. They are essential in construction, manufacturing, and energy sectors to reduce heat transfer and improve energy efficiency. تعتبر الموصلية الحرارية للمسحوق العازل معلمة حاسمة في مجال العزل الحراري. فهو يقيس مدى جودة المسحوق العازل، مثل الأسبستوس، في توصيل الحرارة. تستخدم المساحيق العازلة على نطاق واسع في مختلف الصناعات لأغراض العزل الحراري. وهي ضرورية في قطاعات البناء والتصنيع والطاقة لتقليل انتقال الحرارة وتحسين كفاءة الطاقة. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 3 | 0 |
| 4 | 2 | الصلبة في جهاز نشر الهواء | The Solid in Air Diffusion Apparatus is a key educational tool in chemical engineering and physical sciences labs at the undergraduate level. It is designed to study the diffusion of solid particles in air, an essential concept in various scientific and engineering applications. This apparatus helps students understand the principles of diffusion, particularly how solids diffuse in air. This concept is vital in fields such as catalysis, drying, and environmental engineering. يعد جهاز نشر الهواء الصلب أداة تعليمية رئيسية في مختبرات الهندسة الكيميائية والعلوم الفيزيائية على المستوى الجامعي. وهو مصمم لدراسة انتشار الجزيئات الصلبة في الهواء، وهو مفهوم أساسي في مختلف التطبيقات العلمية والهندسية. يساعد هذا الجهاز الطلاب على فهم مبادئ الانتشار، وخاصة كيفية انتشار المواد الصلبة في الهواء. يعد هذا المفهوم حيويًا في مجالات مثل الحفز الكيميائي والتجفيف والهندسة البيئية. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 4 | 0 |
| 5 | 1 | جهاز التبلور الدفعي | The Batch Crystallizer apparatus is an essential tool in chemical engineering and material science laboratories, especially for diploma students. It provides practical experience in the crystallization process, a key unit operation in the chemical industry. It helps students learn about the formation of crystals from a homogeneous phase. This process is crucial in the purification and production of various chemical and biochemical products.Hands-on experience with the batch crystallizer enhances students' understanding of crystallization kinetics and process control. يعد جهاز Batch Crystallizer أداة أساسية في مختبرات الهندسة الكيميائية وعلوم المواد، خاصة لطلاب الدبلوم. ويوفر خبرة عملية في عملية البلورة، وهي عملية وحدة رئيسية في الصناعة الكيميائية. يساعد الطلاب على التعرف على تكوين البلورات من مرحلة متجانسة. تعتبر هذه العملية حاسمة في تنقية وإنتاج العديد من المنتجات الكيميائية والكيميائية الحيوية. وتعزز الخبرة العملية مع جهاز التبلور الدفعي فهم الطلاب لحركية التبلور والتحكم في العمليات. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 5 | 0 |
| 6 | 2 | مدرب التحكم في درجة الحرارة | This equipment is used to demonstrate and teach the principles of temperature control in various processes, a fundamental aspect in many industrial operations. It allows students to gain hands-on experience in monitoring and regulating temperature, which is critical in processes such as chemical reactions, manufacturing, and thermal management. يستخدم هذا الجهاز لتوضيح وتعليم مبادئ التحكم في درجة الحرارة في العمليات المختلفة، وهو جانب أساسي في العديد من العمليات الصناعية. فهو يسمح للطلاب باكتساب خبرة عملية في مراقبة وتنظيم درجة الحرارة، وهو أمر بالغ الأهمية في عمليات مثل التفاعلات الكيميائية والتصنيع والإدارة الحرارية. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 6 | 0 |
| 7 | 2 | معدات مجفف | Tray Dryer Equipment is an important laboratory apparatus in chemical engineering and related fields, particularly for diploma students. It is designed to provide practical experience in drying and dehydration processes. Tray dryers are used to teach students about evaporation and dehydration, fundamental processes in chemical engineering and industrial applications. تعتبر معدات مجفف الأدراج أحد أجهزة المختبرات المهمة في الهندسة الكيميائية والمجالات ذات الصلة، خاصة لطلاب الدبلوم. وهو مصمم لتوفير الخبرة العملية في عمليات التجفيف والجفاف. تُستخدم مجففات الأدراج لتعليم الطلاب كيفية التبخر والجفاف والعمليات الأساسية في الهندسة الكيميائية والتطبيقات الصناعية. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 7 | 0 |
| 8 | 1 | مدرب التحكم في العمليات المتعددة | This equipment provides an integrated platform for students to learn various aspects of process control, including temperature, pressure, flow, and level control in an industrial-like environment. It offers hands-on experience with real-world process control scenarios, enabling students to understand the dynamics and interactions of different control processes. The trainer is instrumental in developing versatile skills that are applicable across various industries such as pharmaceuticals, food processing, petrochemicals, and manufacturing يوفر هذا الجهاز منصة متكاملة للطلاب لتعلم الجوانب المختلفة للتحكم في العمليات، بما في ذلك التحكم في درجة الحرارة والضغط والتدفق والتحكم في المستوى في بيئة شبيهة بالصناعة. وهو يقدم خبرة عملية مع سيناريوهات التحكم في العمليات في العالم الحقيقي، مما يمكّن الطلاب من فهم ديناميكيات وتفاعلات عمليات التحكم المختلفة. يلعب المدرب دورًا أساسيًا في تطوير مهارات متعددة الاستخدامات يمكن تطبيقها في مختلف الصناعات مثل الأدوية وتجهيز الأغذية والبتروكيماويات والتصنيع ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 8 | 0 |
| 9 | 1 | مجموعة حماية الآلات الكهربائية | • Power supply for electrical equipment, 1 piece Outputs: 1. Three-phase: L1, L2, L3, N can be tapped on 4mm safety sockets 2. DC current: 0...240V DC variable, stabilised and electronically protected against 3. overload and short-circuit 4. Output current: 3...10A (adustable current limitation) 5. Second DC voltage 210 V DC, 6A fixed voltage 6. Protective devices: 7. Motor protection switch adjustable from 6.3...16A 8. Undervoltage trip 9. Safety disconnection 10. Mains connection: 3x 230/400V, 50Hz via CEE plug with 1.8m cable • Motor protection board system 300W, 1 piece 1. Power circuit breaker 2. Electronic overload relay 3. Thermistor motor protection evaluation unit 4. Contactors • Servo machine test stand for 300 W machines, 1 piece 1. Torque display 2. Speed display 3. Setpoint value potentiometer 4. USB interface for connection to the PC 5. Analog outputs for speed and torque 6. Inputs for the control of synchronisation processes 7. Connection terminal for motor temperature and switch contact 8. Connection terminal for determining electrical values of DUT 9. Operating mode selection • Three-phase induction motor, 1 piece 1. Resistance thermometer (PT100) 2. 3 thermistors 3. 3 bi-metallic n.c. contacts 4. Nominal voltage: 690/400V, 50Hz 5. Nominal current: 0.7A / 1.2A 6. Nominal speed: 1380 rpm 7. Nominal power: 0.37 kW 8. cos phi: 0.76 • Digital multimeter, 1 piece This is a trainer kit ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 9 | 0 |
| 10 | 4 | جهاز قياس الذبذبات الرقمي لسطح المكتب | Hantek DSO2D15 Digital Oscilloscope Meter Desktop Oscillograph Oscillometer 800 * 480 Pixel 7 Inch TFT LCDScreen 2CH+1CH Channels 150MHz Band Width 1GSa/s Sampling Rate Oscilloscope Multipurpose Tool This is a DSO to meaure a waveshpe of voltgafe current and power ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 10 | 0 |
| 11 | 4 | طقم تدريب الأسلاك الكهربائية | ECHNICAL SPECIFICATIONS: Power Supplies: . Operated on Mains power AC Supply 230V, 50Hz +10% Test components on board are: • Single Phase Energy Meter. • Circuit Breaker 30mA, 10A (2Nos.) and 16A. • Inter Twilight Circuit Using LDR. • Digital Timer. • Remote Control Switch. • Digital Clock. • Port lights With Lamp (3Nos.). • Ignition Switches (2Nos.). • Push Button. • Two Way Switches (2Nos.). • Shutter Control (2Nos.). • Terminal Block (2Nos.). • Modular Contactor (2Nos.) • Convector 500W. • Simulation Module of Shutter Control (2Nos.). • Light Dimmer. • Presence Detector. • Emergency Stop . Electrical Wiring AL-E5441 ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 11 | 0 |
| 12 | 2 | جهاز اختبار متعدد الوظائف لبطارية ليثيوم أيون للقيم بين 7.2 فولت و 100 فولت, وتيار يصل إلى 120 أمبير | Try charging voltage test *Charging current test *Internal resistance test *Discharge current test *Load voltage test *Overcurrent current test *Overcurrent recovery voltage test *Set aside time *Setting of discharge time and current*Overcurrent protection delay time setting *Over current step current setting It can measure the open circuit voltage, internal resistance, charge, discharge, overcurrent protection, short circuit protection and other functions of the battery. It can easily detect bad batteries and increased production efficiency. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 12 | 0 |
| 13 | 1 | مجموعة حماية المولدات | • Universal power supply for DC and three-phase current, 1 piece • Motor protection switch 3 pole, 1.6-2.5A, 1 piece • Three-phase synchronous maschine with smooth core rotor, 1kW, 1 piece • Servo machine test bench for 1kW machine, 1 piece • Exciter voltage regulation unit, 1 piece • Analog/digital multimeter, wattmeter + power-factor meter, 1 piece • Three-phase Smart Meter, 1 piece • Transformer / Generator differential protection relay, 1 piece • Multi-function relay, power controller, cos-phi controller, sychnronizing unit, 1 piece • Rotor-earth fault relay, 1 piece • Exciter for 0-230V regulating transformer, 1 piece • De-excitation switch, 1 piece • Ohmic load, three-phase, 1kW, 1 piece • Rubber coupling sleeve, 1kW, 1 piece • Coupling guard, 1kW, 1 piece • Shaft end guard, 1kW, 1 piece • Safety connection plug 19mm/4mm, black, with tapping, 10 pieces • Safety connection plug 19mm/4mm, black, 30 pieces • Safety connection plug 19mm/4mm, blue, 2 pieces • Safety connection plug 19mm/4mm, green/yellow, 2 pieces • Set of safety measurement cables 4mm (23pcs), 1 piece This is a trainer kit ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 13 | 0 |
| 14 | 1 | حماية المحولات وخطوط النقل | • Power switch module, 3 piece • Isolating transformer (3-phase, 1 kW), 1 piece • Resistive load (3-phase, 1 kW), 1 piece • Line model, 1 piece • Adjustable three-phase power supply (0 - 400 V / 2 A, 72PU), 1 piece • Table-top housing for 72PU inserts for CEE three-phase connection, 1 piece • 5-way socket strip with illuminated mains switch, 1 piece • Three-phase meter, 1 piece • Digital multimeter, 1 piece • Transformer differential protection relay, 1 piece • Circuit breaker (power-switch module) , 1 piece • Current transformer, 1 piece • Voltage transformer, 1 piece • Overcurrent time protection relay, 1 piece • Directional overcurrent time protection relay, 1 piece • Overvoltage and undervoltage time relays, 1 piece • Directional power relay, 1 piece • Earth-fault protection relay, 1 piece • Distance protection relay, 1 piece This is a trainer kit ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 14 | 0 |
| 15 | 1 | آلة حقن صب | Vertical injection moulding machine is used for making variety of platic products/components. 1. Power(W) 7.5 kW or above, 2. Screw Diameter 20-30mm 3. Style: Vertical 4. Material: High quality Stainless steel; 5. Die: Five(5) variety of dies must be provided with the machine made of die steel ; 6. Took kit and maintenance kit must be provided along with the machine 7. Raw material: Twenty (20) Kgs of Raw material must be provided with the machine. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 15 | 0 |
| 16 | 1 | آلة التشكيل الحراري | Multiplier Industrial Desktop Pressure Former. Multiplier is an industrial pressure former for desktop use that delivers injection-molded level of detail and accuracy. It has a large 380mm (⌀) x 160mm (H) forming volume, pressure forms 0.5mm - 5mm thick sheets up to 60 psi, and heats materials up to 200ºC in less than two minutes. It includes automatic sheet leveling, 8 independent/redundant safety features, and WiFi updateable firmware. Forming Area of 380mm (⌀) x 160mm (H) Multiplier ABS 20 no.s Sheet Pack - 4.00mm (10 sheets) - 5packs must be provided; Multiplier ABS 20 no.s Sheet Pack - 2.00mm (10 sheets) - 5packs must be provided Pressure forms 0.5mm - 5mm thick sheets Heat materials up to 220°C in 2 min. Upgrade with Reducing Plate to use more materials ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 16 | 0 |
| 17 | 1 | طابعة ثلاثية الابعاد للاستخدامات الهندسية متعددة الألوان | Wi-Fi Frequency Range: 2400 MHz - 2483.5 MHz WPA2-Enterprise: EAP-PEAP EAP-TLS EAP-TTLS Ethernet Socket: RJ45 Speed: 100 Mbps / Full Duplex Supported Filaments PLA, PETG, TPU, PVA, BVOH: Optimal ABS, ASA, PC, PA, PET: Superior Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA: Superior PPA-CF/GF, PPS, PPS-CF/GF: Ideal Heating Active Chamber Heating: Yes Maximum Chamber Control Temperature: 60℃ Air Purification Pre-filter grade: G3 HEPA filter grade: H12 Activated Carbon Filter type: Coconut Shell Granulated VOC Filtration: Optimal Particulate Matter Filtration: Yes Network Control Ethernet: Yes Wireless Network: Wi-Fi Network Kill Switch: Wi-Fi & Ethernet Removable Network Module: Yes 802.1X Network Access Control: Yes Toolhead Hot End: All-Metal Nozzle: Hardened Steel Max Hot End Temperature: 320℃ Speed Max Speed of Toolhead: 500 mm/s Max Acceleration of Toolhead: 20000 mm/s2 \ Sensors Bambu Micro Lidar: Yes Chamber Monitoring Camera: 1920*1080 Included Physical Dimensions Dimensions: 389*389*457 mm³ Net Weight: 16 kg ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 17 | 0 |
| 18 | 1 | جهاز إعادة تدوير متكامل للبلاستيك | Description: The set up includes reclaimer, an extruder, airpath, filament spooler and pelletizer. It is a full recycling set up for plastics to recycle plastics into usable filaments for 3D printers or pellets for injection molding or extruders or any other polymer manufacturing processes that use the pellets as the raw materials. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 18 | 0 |
| 19 | 1 | ماكينة لحام بقعة | Description: Pneumatic model must fitted with a solenoid valve and electric foot switch and Fitted with PX1700 digital control. The water cooled brass arms must fitted with copper electrode holders with B.S. taper The lower arm must be adjustable for height. A full range of electrodes should be available. The water cooled transformers must be an advanced compact design for maximum efficiency. Output is SCR controlled and the standard PX1700 control with 10 programmes provides sychronous adjustment of squeeze time, welding time, welding current, pulse and repeat cycle. TECHNICAL DATA: Rated power@ 50% : kVA25 ; Short circuit current: kA13.2 ; Max welding current: kA 13.4 ; Secondary voltage:V3.03 ; Supply voltage (2 ph+earth) V 400 ; Fuse rating (slow blow): A45 ; Welding capacity (MS, std arms): mm3+3 ; Electrode force: daNPB – 180 ; Gap between arms: mm 220 - 350 ; Arm length:mm 400(std) – (600 - 800) ; rm diameter: mm45 ; Electrode holder dia.(625 taper): mm 25 ; Electrode stroke: mm 6 – 50 ; Water flow required: lt/min 5 ; Dimensions L x W x H:mm1020 x 300 x 1270 ; Weight: kg125. Note: All necessary fittings and mountings must be provided to allow the machine to perform its functinos and also necessary tool box/kit must be provided. " ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 19 | 0 |
| 20 | 5 | أدوات مخرطة التحكم العددي بالحاسوب 1 | CNC lathe Roughing Tool Holder Description: (1) For external cutting/roughing operation, a tool holder size of 25mm x 25mm (External/outer cutting). Also, a box of 10 Tool Inserts set should be provided along with each holder, Note: All Tool holders must be supplied with tool inserts. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 20 | 0 |
| 21 | 5 | أدوات مخرطة التحكم العددي بالحاسوب 2 | Description: (2). For external finishing operation, a tool holder size of 25mm x 25mm (External/outer Finishing). Also, a box of 10 Tool Inserts should be provided set. Tool Inserts set should be there along with each holder. Note: All Tool holders must be supplied with tool inserts. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 21 | 0 |
| 22 | 5 | أدوات مخرطة التحكم العددي بالحاسوب 3 | Description: (3) For Parting off operation, A Parting tool holder Size: 25mm X 25mm, Width 3mm. The parting tool holder must be able to cut up to a maximum 40mm diameter bar. Also a box of 10 Parting Inserts with width 3mm. Note: All Tool holders must be supplied with tool inserts. ويشترط ارفاق الكتالوج وتركيب الجهاز والتشغيل والتدريب مع ضمان صيانة لا تقل عن سنتين | عدد | 22 | 0 |
22 بند
| اسم المورد | قيمة العرض (ر.س) | قيمة الترسية (ر.س) | النتيجة الفنية | الحالة |
|---|---|---|---|---|
| مؤسسة سهام باغفار التجارية | 918,302.60 | — | غير مطابق | مشارك |
| شركة مستقبل التكنولوجيا للتجارة | 3,549,820.00 | — | غير مطابق | مشارك |
| شركة المهندسون العرب للتجاره المحدوده | 1,973,630.00 | — | غير مطابق | مشارك |
| شركة بايوني التجارية | 1,697,165.40 | — | مطابق | مشارك |
| شركة العلميه الوطنيه المحدوده | 725,316.50 | — | غير مطابق | مشارك |
| شركة بناء الجاذبية للتجارة | 2,328,117.50 | — | مطابق | مشارك |
| شركة الحلول المطلقة المحدودة شركة شخص واحد | 990,695.10 | — | غير مطابق | مشارك |
| شركة بايوني التجارية | 1,697,165.40 | 1,697,165.40 | — | مرسّى |
الآليات
تفضيل المنشآت الصغيرة والمتوسطة
معايير التقييم
معايير التقييم الفني
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم الفني |
معايير التقييم المالي
| المستوى الاول | المستوى الثاني | المستوى الثالث | الوزن النهائي |
|---|---|---|---|
| التقييم المالي | السعر | التكلفة الكلية | 100% |
أخبار المنافسة
title
تاريخ الإنشاء
value
15/11/46 10:43:29 ص
title
تاريخ فتح العروض
value
12/01/47 10:00:00 ص
title
تمديد تواريخ المنافسة
value
تاريخ فتح العروض12/01/47 10:00:00 صآخر موعد لتقديم العروض12/01/47 10:00:00 صآخر موعد لإستلام الإستفسارات08/01/47 12:00:00 ص
title
تاريخ الترسيه
value
28/02/1447